• Journal of the Korean Ceramic Society
• /
• v.43 no.7 s.290
• /
• pp.421-426
• /
• 2006

[ $(BaSr)TiO_3$ ] thick films were prepared by tape casting method, using $BaTiO_3\;and\;SrTiO_3$ powder slurry in order to investigate dielectric properties i.e. dielectric constant, ${\varepsilon}_r$, Curie temperature, $T_c$. Grain growth within $(BaSr)TiO_3$ thick films was observed with increasing weight ratio of $BaTiO_3$. This observation can be explained by phenomena of substitution of $Sr^{2+}$ ion for $Bi^{2+}$ ion in the $BaTiO_3$ system. Also, the Curie temperature in $(BaSr)TiO_3$ thick films was shifted to lower temperature range with increasing $ SrTiO_3$. Furthermore, Curie temperature having maximum dielectric constant was in the range of $-40^{\circ}C\;to\;30^{\circ}C$, and hence sharper phase transformation occurred at Curie temperature. There occurred decrease in tunability and k-factor of $(Ba_{0.6}Sr_{0.4})TiO_3$ calculated from the dielectric constant, ${\varepsilon}_r$ above Curie temperature. In addition, above the $60^{\circ}C$, phase fixation was observed. This means that internal stress relief occurred with increasing $90^{\circ}$ domains.

• Korean Journal of Materials Research
• /
• v.14 no.2
• /
• pp.115-120
• /
• 2004

Perovskite barium-strontium titanate, $(Ba, Sr)TiO_3$ was prepared and effects of $Sb_2$O$_3$ additives on its PTCR properties were investigated. $The (Ba,Sr)TiO_3$ with 0.05～0.25 mol% $Sb_2$$O_3$ showed semiconducting PTCR behavior and anomalous grain growth was also observed when it was sintered above $1330^{\circ}C$. It was considered that charge compensation by doping 8b203 as well as abnormal grain growth by sintering lead to resistivity reduction from insulating to semiconducting transition.

• Journal of the Korean Chemical Society
• /
• v.7 no.4
• /
• pp.254-256
• /
• 1963

A spectrochemical analysis was made to compare the major impurities in $BaTiO_3$ single crystals grown from $KF-BaTiO_3$ system and $TiO_2-BaTiO_3$ system respectively. The present technique was also extended, without any modifications, to the analysis of $SrTiO_3$ crystal.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.201-204
• /
• 2009

$BaTiO_3/SrTiO_3$ and $PbTiO_3/PbZrO_3$ superlattice thin films were fabricated on $Pt/Ti/SiO_2/Si$ substrate by the pulsed laser deposition process. The morphologies and physical properties of deposited films were characterized by using X-ray diffractometer, HR-SEM, and Impedance Analyzer. XRD data and SEM images of the films indicate that each layer was well deposited alternatively in the superlattice structure. The dielectric constant of $BaTiO_3/SrTiO_3$ superlattice thin film was higher than that of individual $BaTiO_3$ or $SrTiO_3$ film. Same result was obtained in the $PbTiO_3/PbZrO_3$system. The dielectric constant of a superlattice film was getting higher as the number of layer is increased.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.410-415
• /
• 1999

$Ba_{1-x}Sr_xTiO_3$ thin films with various ratio of Sr (X = 0.4, 0.5, 0.6) were grown $Pt/TiN/SiO_2/Si$ subastrate by RF magnetron sputtering deposition. As, Ag, and Cu films were deposited on $Ba_{1-x}Sr_xTiO_3$ thin films as top electrodes by using a thermal evaporator. The electrical properties of $Ba_{1-x}Sr_xTiO_3$ thin films for various compositions were characterized and the physical properties at interface between $Ba_{1-x}Sr_xTiO_3$ thin films and top electrodes were evaluated in terms of the work function difference. At x =0.5, the degradation of capacitance is lower to the other compositions. As negative biasapplied, the specimen with Cu top electrode has board saturation region and low leakage current since work function of Cu is bigger than other electrodes.$ Ba_{0.5}Sr_{0.5}TiO_3$ thin films with Cu top electrode, the dielectric constant was measured to the value of 354 at 1 kHz and the leakage current was obtained to the value of $5.26\times10^{-6}A/cm2$ at the forward bias of 2 V.

• Korean Journal of Materials Research
• /
• v.2 no.4
• /
• pp.248-256
• /
• 1992

This paper has reviewed some of the basic principles that underlie the field of defect chemistry in simple ATi$O_3$(A=Ca, Sr, Ba) perovskites. Frenkel defects in perovskite structure is very much unlikely, and Schottky defects and intrinsic electronic defects in undoped materials are negligibly small compared with background acceptor impurities. The electrical properties of perovskite ceramics are dependent on the aliovalent impurities. Since perovskite structure is a ternary system, the stoiohiometry between cations as well as cation-anion ratio will affect defect structure and electrical properties. BaTi$O_3$and SrTi$O_3$show a limited deviation from the cation stoichiometry while CaTi$O_3$has significant excess CaO and Ti$O_2$solubility.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.693-696
• /
• 2001

The (Ba$_{0.3}$Bi$_{0.3}$Sr$_{0.4}$)TiO$_3$[BBST] ceramics were prepared by conventional mixed oxide method. The structural properties of the BBST ceramics with sintering temperature were investigated by XRD, SEM, EDS. In the case of BBST ceramics sintered at 1150~135$0^{\circ}C$, the $Ba_{0.5}$Sr$_{0.5}$TiO$_3$and SrBi$_4$Ti$_4$O$_{15}$ phase were coexisted. The 2$\theta$ value of the BST (110) peaks were shifted to the lower degree at the sintering temperature of 130$0^{\circ}C$ and 135$0^{\circ}C$. The grains of the BBST ceramics sintered at 130$0^{\circ}C$ and 135$0^{\circ}C$ were not appeared. Increasing the sintering temperature, the densities of the BBST ceramics were increased. In the BBST ceramics sintered at 130$0^{\circ}C$ and 135$0^{\circ}C$, the mole ratio of Bi was decreased.d.ed.d.d.d.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2005.09a
• /
• pp.201-212
• /
• 2005

[ $Epoxy/BaTiO_3$ ] composite embedded capacitor films (ECFs) were newly designed fur high dielectric constant and low tolerance (less than ${\pm}15\%$) embedded capacitor fabrication for organic substrates. In terms of material formulation, ECFs are composed of specially formulated epoxy resin and latent curing agent, and in terms of coating process, a comma roll coating method is used for uniform film thickness in large area. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ composite ECF is measured with MIM capacitor at 100 kHz using LCR meter. Dielectric constant of $BaTiO_3$ ECF is bigger than that of $SrTiO_3$ ECF, and it is due to difference of permittivity of $BaTiO_3\;and\;SrTiO_3$ particles. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ ECF in high frequency range $(0.5\~10GHz)$ is measured using cavity resonance method. In order to estimate dielectric constant, the reflection coefficient is measured with a network analyzer. Dielectric constant is calculated by observing the frequencies of the resonant cavity modes. About both powders, calculated dielectric constants in this frequency range are about 3/4 of the dielectric constants at 1 MHz. This difference is due to the decrease of the dielectric constant of epoxy matrix. For $BaTiO_3$ ECF, there is the dielectric relaxation at $5\~9GHz$. It is due to changing of polarization mode of $BaTiO_3$ powder. In the case of $SrTiO_3$ ECF, there is no relaxation up to 10GHz. Alternative material for embedded capacitor fabrication is $epoxy/BaTiO_3$ composite embedded capacitor paste (ECP). It uses similar materials formulation like ECF and a screen printing method for film coating. The screen printing method has the advantage of forming capacitor partially in desired part. But the screen printing makes surface irregularity during mask peel-off, Surface flatness is significantly improved by adding some additives and by applying pressure during curing. As a result, dielectric layer with improved thickness uniformity is successfully demonstrated. Using $epoxy/BaTiO_3$ composite ECP, dielectric constant of 63 and specific capacitance of 5.1nF/cm2 were achieved.

• Journal of the Korean Ceramic Society
• /
• v.22 no.3
• /
• pp.46-52
• /
• 1985

(Ba0.8. Sr0.2) $TiO_3$ semiconducting ceramic with and without Ti-excess composition were prepared by various sintering temperature. The effects of Ti compositions on the samples were discussed in terms of color micro-structure resistivity at room temperature and the positive temperature coefficient resistivity(PTCR). The 1.02mol Ti-excess composition provides better PTCR properties and has uniform micrositructures with 5-7${\mu}{\textrm}{m}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.3
• /
• pp.195-201
• /
• 2003

The (Ba,Bi,Sr)TiO$_3$[BBST] thin films were fabricated on Pt/Ti/SiO$_2$ /Si substrate by RF sputtering method. The effects of Ar/O$_2$ ratio on the structural and dielectric properties of BBST thin films were investigated. Increasing the Ar/O$_2$ ratio, the intensity of BaBi$_4$Ti$_4$O$_{15}$ and Bi$_4$Ti$_3$O$_{12}$ peaks were increased but (Ba$_{0.5}$Sr$_{0.5}$)TiO$_3$ peak was decreased. In the BBST thin films deposited with condition of Ar/O$_2$(90/10) ratio, the composition ratio of the Ba, Bi and Sr atoms were 0.35, 0.25 and 0.4 respectively. The Bi and Ti atoms were diffused into the Pt layers. Increasing the Ar/O$_2$ ratio, the dielectric constant of the BBST thin films were increased but the dielectric loss of the BBST thin films were decreased. The dielectric constant and dielectric loss of the BBST deposited at 90/10 of Ar/O$_2$ ratio were 319 and 2.2%. respectively . Increasing the applied voltage, the capacitance of the BBST thin films were decreased.reased.