• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권7호
• /
• pp.32-40
• /
• 2013

This study was objected to evaluate the potential impact on the groundwater environment of the coal bottom ash used as fill materials on the land surface. From four coal-fired power plants, bottom-ashes were collected and analyzed through sequential extraction and column leaching tests following the meteoric water mobility procedure. The column tests shown leaching heavy metals including Pb, As, B, Cu, Zn, Mn, Ni, Ba, Sr, Sb, V, Cr, Mo, and Hg. The relatively high concentrations of B, Sr, Ba, and V in leachate were attributed to both the higher concentrations in the bottom ash and the relatively higher portion of leachable state, sorbed state, of metals. Bottom-ash samples from the D-plant only show high leaching potential of sulfate ($SO_4$), probably originated from the coal-combustion process, called the Fluidized Bed Combustion. Consequently, to manage recycling bottom ashes as fill materials, an evaluation system should be implemented to test the leaching potentials of metals from the ashes considering the absolute amount of metals and their state of existence in ashes, and the coal-combustion process.

• 한국미생물·생명공학회지
• /
• 제28권4호
• /
• pp.202-208
• /
• 2000

Four bacteria capable of using aniline as a sole source of carbon and energy we4e isolated from river waters. Among them, two strains were identified as Stenotrophomonas maltophilia based on their physiological and biochemical characteristics and 16SrRNA gene sequence and the others as delftia acidovorans. The four strains were able to grow on the mineral salt media containing aniline at concentrations up to 6,000 $\mu\textrm{g}$/ml. Since aniline degradation by S. maltophilia has not been reported so far, the two strains A-s and 51-4 were selected for further studies. They completely utilized aniline in a mineral salt medium containing 300 $\mu\textrm{g}$/ml of aniline as a sole carbon and energy source within 24 hours. Optimum pH and temperature for aniline degradation and cell growth of both strains were 7.0 and $35^{\circ}C$, respectively. In addition, they effectively degraded aniline is waste, underground and river waters containing 300 $\mu\textrm{g}$/ml of aniline. This is the first report of aniline degradation by S. maltophilia strains.

• Journal of Microbiology and Biotechnology
• /
• 제15권1호
• /
• pp.118-124
• /
• 2005

In this research, we examined the effect of NaCl on the growth, energy metabolism, and proton motive force of Halomonas salina, and the effect of compatible solutes on the bacterium growing in the high salinity environment. H. salina was isolated from seawater and identified by 16srDNA sequencing. The growth of H. salina was not enhanced by the addition of external compatible solutes (choline and betaine) in the high salinity environment. The resting cells of H. salina absorbed more glucose in the presence of 2.0 M NaCl than in its absence. H. salina did not grow in the medium with either KCl, RbCl, CsCl, $Na_2SO_4$, or $NaNO_3$, in place of NaCl. The optimal concentration of NaCl for the growth of H. salina ranged from 1.4 M to 2.5 M, and the growth yield was decreased in the presence of NaCl below 1.4M and above 2.5M. The activity of isocitrate dehydrogenase, pyruvate dehydrogenase, and malate dehydrogenase of H. salina was not inhibited by NaCl in in vitro test. The proton translocation of H. salina was detected in the presence of NaCl only. These results indicate that NaCl is absolutely required for the normal growth and energy metabolism of H. salina, but the bacterial growth is not enhanced by the compatible solutes added to the growth medium.

• 분석과학
• /
• 제29권2호
• /
• pp.65-72
• /
• 2016

액체섬광계수기(Liquid Scintillation Counter, LSC)를 이용한 토양 중 ²²⁶Ra 분석 방법에 대해 연구하였다. 용융법으로 토양에서 Ra을 추출하고, Ba(Ra)SO₄로 침전시켜 방해핵종과 Ra을 분리하였다. Ba(Ra)SO₄를 산에 녹을 수 있는 Ba(Ra)CO₃로 변환시키고, 라돈 가스를 포집할 수 있는 소수성 섬광용액과 혼합한 다음, LSC로 분석하였다. ²²⁶Ra과 ⁹⁰Sr 표준시료를 이용하여 최적의 PSA(Pulse shape analysis, 파형분석) 준위를 설정하였다. FOM(Figure of merit, 성능지수)이 최대이고 알파선 중첩정도가 최소로 나타나는 PSA 80을 최적값으로 결정하였다. Glass vial을 사용했을 때 계측 효율은 243±2% 이다. 본 연구에서 개발한 분석법은 IAEA-312, IAEA-314, IAEA-315를 이용하여 그 신뢰도를 평가를 하였다. 회수율은 60~82% 이며, 측정값과 참고값과의 상대편의가 10 % 이내였다. 최소검출농도는 토양 1 g, 바탕 계수율 0.02 cpm일 때, 회수율 70 %, 계측시간 30 분을 기준으로 2.1 Bq kg⁻¹ 이다.

• 센서학회지
• /
• 제22권4호
• /
• pp.244-248
• /
• 2013

The discovery of a two-dimensional electron gas (2DEG) in $LaAlO_3$ (LAO)/$SrTiO_3$ (STO) heterostructure has stimulated intense research activity. We suggest a new structure model based on $KNbO_3$ (KNO) material. The KNO thin films were grown on $TiO_2$-terminated STO substrates as a p-type structure ($NbO_2/KO/TiO_2$) to form a two-dimensional hole gas (2DHG). The STO thin films were grown on KNO/$TiO_2$-terminated STO substrates as an n-type structure to form a 2DEG. Oxygen pressure during the deposition of the KNO and STO thin films was changed so as to determine the effect of oxygen vacancies on 2DEGs. Our results showed conducting behavior in the n-type structure and insulating properties in the p-type structure. When both the KNO and STO thin films were deposited on a $TiO_2$-terminated STO substrate at a low oxygen pressure, the conductivity was found to be higher than that at higher oxygen pressures. Furthermore, the heterostructure formed at various oxygen pressures resulted in structures with different current values. An STO/KNO heterostructure was also grown on the STO substrate, without using the buffered oxide etchant (BOE) treatment, so as to confirm the effects of the polar catastrophe mechanism. An STO/KNO heterostructure grown on an STO substrate without BOE treatment did not exhibit conductivity. Therefore, we expect that the mechanics of 2DEGs in the STO/KNO heterostructures are governed by the oxygen vacancy mechanism and the polar catastrophe mechanism.

• Journal of the Korean Wood Science and Technology
• /
• 제2권2호
• /
• pp.8-12
• /
• 1974

한국의 목재 인공 건조법을 개발하기 위하여 필자의 전직 대학인 전북대학교 전 김두헌 총장님, 동농대전 백남혁학장 및 동농대교수 제위의 각별한 협조를 얻어 1956년 고액을 지불하고 미국 More Dry Kiln Co.에서 최신의 목재 인공 건조 장치를 도입하여 전북 농대 임학과에 설치하게된 것이다. 그러나 이 건조 시설을 활용하는데는 많은 지장이 있었으므로 1959년 전기 More Dry Kiln의 온, 습도 조절장치만을 이용한 소형 Dry kiln을 제작하여 본 시험을 실시한 것이다. 공시수종은 소나무, 낙엽송, 은행나무, 전나무, 밤나무 및 감나무등이며, 공시목의 크기는 것이 60cm, 넓이 10cm 및 두께 15-35mm이다. 실험한 건조 조건은 건조 온도를 일정히 ($170^{\circ}F$)하고, 관계습도를 각종으로 변화할때 얻어지는 건조 속도를 측정하는 동시에 각 건조조건에 의하여 유발되는 건조결함을 조사하여 공시목의 초기 함수율과 건조 최경함수율 특히 shell의 함수율과의 비가 이들의 결함 형성 특히 표면경화(casehardening) 형성에 미치는 영향을 구명하였으며 또한 casehardening 계산식을 유도하였다. 1. 목재내부에 형성된 응력 즉 prong이 개주할 때의 응력은 prong이 서로 접합할 때의 응력을 100으로 하는 백분율에 의하여 다음식으로 표시할 수 있다. 단, 응력 측정에 사용한 prong은 그림 1과 같이 작성하여야 한다. $CH=\frac{(A-B') (4W+A) (4W-A)}{2A[(2W+(A-B')][2W-(A-B')]}{\times}100%$ 상식은 다음과 같은 간이식을 사용할 수 있다. $CH=\frac{A-B'}{A}{\times}200%$ 2. 일정 한 건조 조건하에 건조하여 항중에 달하고, 또한 normal casehardening을 형성하는 경우에 는, 그 sample board의 shell 의 함수율은 특히 얇은 sample board에 있어서 US Dep. Agr., Forest Products Laboratory에서 발표한 EMC 보다 낮다. 3. 본 실험에서 측정한 1시간당 목재 건조 표면적 $1cm^2$ 당 증발하는 증발량 즉 건조속도를 비교 검토한 결과 다음과 같은 순위로 되었으며, 비교 검토한 5수 종중 최대치를 유하는 은행나무 MC 20% 에 있어서 최저치를 표시한 밤나무의 3.8배가 된다. (표 1 참조) (1) 은행나무 (2) 감나무 (3) 소나무 (4) 낙엽송 (5) 밤나무 특히 함수율 26% 이하에 있어서 각 함수율에 대한 증발속도치는 다음과 같은 일차식으로 표시 할 수 있으며, 그 회귀계수 유의성 검정에 있어서의 T치는 다음과 같이 각각 고율의 유의성을 표시하였다. (표2 참조) 상기중 Y는 증발속도($g/cm^2hr$.), X는 함수율을 각각표시한다. 이들 회귀직선을 도시하면 그림 2와 같다. 4. 초기함수율과 건조 최종기에 있어서의 목재의 표층 함수율 즉 shell의 함수율과의 비(SR)가 casehar dening 형성에 미치는 영향은 다음과 같다. 어떤 SR 값에 관하여 그 SR 값 이하를 유하는 총개제수(N) 중 CH 제4급이 출현하는 수(D)의 확율 즉 N에 대한 D의 출현확율 P%는 표 3과 같다. (D의 출현확율 P%를 위험확율이라고 가칭한다.) 표 4에 있어서 종란의 1,2,3의 숫자는 각각 다음과 같은 사항을 표시한다. (1) CH 값 제 4급이 출현하지 아니 하는 안전한 최소 SF 값 (2) 위험을 30%를 허용하는 경우에 있어서의 SF 값의 한계 (3) CH 값 제 4급 이하가 발생하지 아니하는 위험율 100%의 값의 범위 상기한 실측 결과에 의하여 밤나무, 낙엽송등은 내부응력 형성이 용이한데 비하여 감나무, 소나무등은 내부응력 형성이 용이하지 아니하여, 특히 전나무, 은행나무등은 타수종과 동일한 건조조건에 있어서 reverse casehardening을 초래함에 비추워 타수종에 비하여 현저히 내부응력 특히 normal casehardening이 잘 형성되지 아니한다는 것을 알 수 있다. 5. casehardening을 제외한 각종의 drying defects는 long time loading에 있어서 그 내부응력이 ultimate stress를 초과할 때 나타나는 것인데 건조조건 온도 $170^{\circ}F$에 대하여 습도를 낮게하여도 그렇게 심하지 아니하나, 온도 $200^{\circ}CF$의 저습에 있어서 end coating을 하지 아니하는 경우에는 용이하게 발생한다. 특히 밤나무는 실험한 타수종에 비하여 casehardening 및 활열성 defects가 강한 것을 지적할 수 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권11호
• /
• pp.1558-1564
• /
• 2015

Cutaneous evaporative heat loss in Bos indicus and Bos taurus has been well documented. Nonetheless, how crossbreds with different fractional genetic proportions respond to such circumstances is of interest. A study to examine the physiological responses to cutaneous evaporative heat loss, also lactation period and milk yield, were conducted in Sahiwal (Bos indicus, n = 10, $444{\pm}64.8kg$, $9{\pm}2.9years$), Holstein Friesian (Bos taurus, HF100% (n = 10, $488{\pm}97.9kg$, $6{\pm}2.8years$)) and the following crossbreds: HF50% (n = 10, $355{\pm}40.7kg$, $2{\pm}0years$) and HF87.5% (n = 10, $489{\pm}76.8kg$, $7{\pm}1.8years$). They were allocated so as to determine the physiological responses of sweating rate (SR), respiration rate (RR), rectal temperature (RT), and skin temperature (ST) with and without hair from 06:00 h am to 15:00 h pm. And milk yield during 180 days were collected at days from 30 to 180. The ambient temperature-humidity-index (THI) increased from less than 80 in the early morning to more than 90 in the late afternoon. The interaction of THI and breed were highly affected on SR, RR, RT, and ST (p<0.01). The SR was highest in Sahiwal ($595g/m^2/h$) compared to HF100% ($227g/m^2/h$), and their crossbreds both HF50% ($335g/m^2/h$) and HF87.5% ($299g/m^2/h$). On the other hand, RR was higher in HF87.5% (54 bpm) and both HF100% (48 bpm) and HF50% (42 bpm) than Sahiwal (25 bpm) (p<0.01). The RT showed no significant differences as a result of breed (p>0.05) but did change over time. The ST with and without hair were similar, and was higher in HF100% ($37.4^{\circ}C$; $38.0^{\circ}C$) and their crossbred HF50% ($35.5^{\circ}C$; $35.5^{\circ}C$) and HF87.5% ($37.1^{\circ}C$; $37.9^{\circ}C$) than Sahiwal ($34.8^{\circ}C$; $34.8^{\circ}C$) (p<0.01). Moreover, the early lactation were higher at HF100% (25 kg) and 87.5% (25 kg) than HF50% (23 kg) which were higher than Sahiwal (18 kg) while the peak period of lactation was higher at HF100% (35 kg) than crossbreds both HF87.5% and HF50% (32 kg) which was higher than Sahiwal (26 kg) (p<0.05). In conclusion, sweating and respiration were the main vehicle for dissipating excess body heat for Sahiwal, HF and crossbreds, respectively. The THI at 76 to 80 were the critical points where the physiological responses to elevated temperature displayed change.

• 대한화장품학회지
• /
• 제23권3호
• /
• pp.134-146
• /
• 1997

Consumers have recently preferred to purchase extensive UV intercepting products, which are waterproof and free from side effects on skin. Testing Cytoroxicity in SR method, cell survivial ratio of UV-B interceptors decreased above 0.08W/V%, and so did that of UV-A interceptors above 0.06W/V%. Also, Patch-test of inorganic UV interceptors resulted in no skin irritation even below 10.0 and 11.25. UV interceptors in the sunlight showed yellowish discoloration in 5 to 14 days. In absorption curves, UV-B was most suitable for Octyl methoxycinnamate and UV-A for Butyl methoxy dibenzoylmethane. Fro this reason, Nylonpoly UVA/UVB the material of OMC and BMDM coated with Nylon & polyethylene, was used as the organic UV interceptor. And zinc oxide and titanium dioxide was used as inorganic UV ibterceptors. The appropriate mixture ratio of ZnO and TiO2 was 6 to 4.6% of ZnO, 4% of TiO2 and 5% of Nylonpoly UVA/UVB were all combined with our sunscreen cream. The SPF value of in-vivo applied to a guinea pig was 34.9 and that of in-vivo was 38.5. Cyclomerhicone and dimerthicone were used in water-in-Silicone system. Ceryl diverhicone and sorbitan sesquioleate were used as emulsifiers and MgSO4, 7H2O, Mg-stearate/Mg-Al-stearate copolymer as emulsification stabilizers. In practical application, each SPF duration of O/W type and W/S type containing sunscreen cream of the same content showed that W/S type of sunscreen cream was 5 times as durable as the other. This product is fit for using in swimming, climbing or skiing. This research is to minimize skin trouble used by UV interceptors and to make one with proper softness, skin safety and UV intercepting efficiency.

• 토지주택연구
• /
• 제2권4호
• /
• pp.325-344
• /
• 2011

On November 1, 2010, the release of ISO 26000 was announced. ISO 26000 does not require 3rd party verification. But even though it is a standard that is voluntarily adopted, because the international standard for social responsibility can be applied as a trade barrier or business condition between countries, it cannot be ignored. So it is clear that we need to be alerted and prepared for this. This paper offers to help with such needs through organizations by developing an index that organizations can use to understand their current situation and diagnose themselves. This paper conducts a comparative analysis between the 7 core subjects and issues of ISO 26000, the existing indexes used by national institutions and the guideline for sustainable management report, the GRI, with the goal of developing a self-diagnostic index that organizations can utilize in order to diagnose their level of social responsibility. It is divided into the 7 core subjects with 181 measurement issues. There are 7 quantitative issues and 164 qualitative issues. The core subjects, excluding governance, are each alloted 14 points, while governance is alloted with 16 points, for a total score of 100 points. This paper is significant in that it is the first index to make self-diagnostic possible.

• 한국표면공학회지
• /
• 제14권4호
• /
• pp.215-220
• /
• 1981

The surface appearance of chromium electrodeposit was studied by employing a pulse curr-ent plating in self-regulating high speed (SRHS) bath containing 20 g/$\ell$, K2SiF6 7.5 g/$\ell$ SrSO4 and 250 g/$\ell$ CrO3. As the pulse frequency increased, the surface appearance changed suddenly from bright a-ppearance in a direct current plating condition to gray one in the range of pulse frequency less than about 20KHz. However the bright appearance is recovered as the pulse frequen-cy exceeded 20 KHz. This phenomena seemed to be related with the preferred orientation of electrodeposits, considering the relationship between the preferred orientation of elect-rodeposits and surface appearance in a SRHS bath. Direct current plating was also applied to both Sargent and SRHS bath and investigat-ion on surface appearance was extended to the high current density of 400 A/dm2. In a Sa-rgent bath, the increase in bath temperature was necessary for bright appearance as the current density was increased within 150 A/dm2, but bright region was shown in the cons-tant temperature of 70-75$^{\circ}C$ above the current density of 150A/dm2. On the other hand, two regions of surface brightness was found in a SRHS bath. One is region in the low temperature less than 25$^{\circ}C$ and the other in the moderate temperature range from 55$^{\circ}C$ to 65$^{\circ}C$.