• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.11
• /
• pp.550-554
• /
• 2001

$(Ba_{0.6}Sr_{0.4}Ca_x)TiO_3 + yAl_2O_3$ wt% (x=0.10, 0.15, 0.20, y=0~3.0) ceramics were fabricated by the mixed-oxide method, and their structural and dielectric properties were investigated with variation of composition ratio and $Al_2O_3$ doping content. As results of the X-ray diffraction and microstructure analysis, all BSCT specimens showed dense and homogeneous structure without presence of the second phase. The sintered density was decreased with an increase of $Al_2O_3$ doping content. The Curie temperature and relative dielectric constant at room temperature were decreased with increasing $Al_2O_3$doping content. The dielectric loss is minimum at BSCT doped with 1.5wt% $Al_2O_3$content. The tunability was decreased with increasing an Ca content and the BSCT(50/40/10) specimen doped with 2.0wt% $Al_2O_3$content showed the maximum value of 4.2%.

• The Korean Journal of Ceramics
• /
• v.5 no.2
• /
• pp.189-194
• /
• 1999

Crystallization of glasses in the system (Ca, Sr, Ba)$O-Al_2O_3-B_2O_3-SiO_2-TiO_2$ and dielectric properties of crystallized glasses were investigated. As increasing B2O3 content and decreasing SiO2 content in the glass, the major crystalline phase changed from $(Sr, Ba)_2TiSi_2O_8$ to (Ca, Sr, Ba)TiO3, the dielectric constant of crystallized glasses increased and the Temperature Coefficient of Capacitance (TCC) changed to negative. The dielectric constant and TCC was estimated for (Sr, Ba)2TiSi2O8 phase as 18 and -440 $ppm/^{\circ}C$, respectively and for (Ca, Sr, Ba)TiO3 phase as 307 and -1900 $ppm/^{\circ}C$, respectively. The dielectric properties of (Ca, Sr, Ba)TiO3 phase (in this study) were similar to those of (Ca, Ba) TiO_3 solid-solution^12)$, but $(Sr, Ba)_2TiSi_2O_8$ phase (in this study) and $Sr_2TiSi_2O_\;8^4$ showed the different properties.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.7-10
• /
• 2003

Quarternary $SrO-B_2O_3-Al_2O_3-SiO_2$ glasses were fabricated as a function of $R({\equiv}SrO\;mole%/B_2O_3\;mole%)$ and $K({\equiv}(Al_2O_3+SiO_2)\;mole%/B_2O_3\;mole%)$. The structures of these glasses were investigated through Infrared absorption spectra. When R increased, the intensities of the absorption bands around $1,200{\sim}1,600cm^{-1}$ resulting from the B-O stretching vibration bond in the symmetrical trigonal $BO_3$ units decreased, and these of the absorption bands around $800{\sim}1,200cm^{-1}$ caused by the B-O stretching vibration bond of the tetrahedral $BO_4$ units varied. Also, the intensities of the absorption bands for the B-O stretching vibration band in trigonal $BO_3$ units increased and these of the bands for B-O stretching vibration bond in tetrahedral $BO_4$ units decreased as K increased.

• Journal of the Korean Chemical Society
• /
• v.47 no.4
• /
• pp.370-375
• /
• 2003

$BaMg_2Al_16O_27:Eu,\SrGa_2S_4:Eu$, and ZnCdS:Ag,Cl phosphors were chosen to produce blue, green, and red emissions, respectively, under excitation from a violet light emitting diode (LED). A four-band white LED was obtained by a combination of nonabsorbed violet emission from a violet LED and blue, green, and red emissions from $BaMg_2Al_16O_27:Eu,\SrGa_2S_4:Eu$, and ZnCdS:Ag,Cl phosphors. The luminescent properties of the four-band white LED were also discussed.

• Journal of the Korean Ceramic Society
• /
• v.45 no.3
• /
• pp.146-149
• /
• 2008

Strontium-substituted $Sr_{1-x}Ba_xAl_2O_4:Eu^{2+},\;Dy^{3+}$ compositions were prepared by the solid state synthesis method. These compositions were characterized for their phase, crystallinity and morphology using powder x-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. Photoluminescence properties were investigated by measuring excitation spectra, emission spectra and decay time for varying Ba/Sr concentrations. Photoluminescence results show higher luminescence and long decay time for $Sr_{1-x}Ba_xAl_2O_4:Eu^{2+},\;Dy^{3+}$(x=0). This is probably due to the influence of the 5d electron states of $Eu^{2+}$ in the crystal field. Long persistence was observed for these compositions due to $Dy^{3+}$ co-doping.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.3
• /
• pp.315-319
• /
• 1999

Properties of both photoluminescence and long-phosphorescent for Eu, Dy-codoped $SrAl_2O_4$ powder phosphor synthesized by solid reaction method were investigated by PL instrument. Two intense peaks in the emission spectrum measured at 10 K are observed near 450 nm (2.755 eV) and 520 nm (2.384 eV) wavelength, but at 300 K the main peak of 520 nm wavelength is presented. After the removal of light excitation (360 nm), the excellent after-glow characteristic of the phosphorescence were obtained as a result of low decay tiem, although the after-glow intensities of phosphor vary exponentially with the times.

• Journal of the Korean Ceramic Society
• /
• v.27 no.7
• /
• pp.841-850
• /
• 1990

The electrical conductivity of SrTiO3 thick films, which has been prepared by screen printing and sintering on polycrystalline Al2O3 substrates, was determined as a function of oxygen partial pressure and temperature. The data showed that electrical conductivity was proportional to the -1/4th power of the oxygen partial pressure for the oxygen partial pressure range from 10-4-10-8 to 10-20 atm and proportional to Po2+1/4 for the oxygen partial pressure range from 10-6-10-4 to 1atm. And then n-p transition region of electrical conductivity moved to lower oxygen partial pressure region as the sintering temperature of thick film specimens increased under about 140$0^{\circ}C$. These data were consistent with the presence of small amounts of acceptor impurities in SrTiO3 thick film which have been diffused from Al2O3 substrate in the range of solid solubility limit.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1493-1495
• /
• 2001

$(Ba_{0.6-x}Sr_{0.4}Ca_x)TiO_3+yAl_2O_3$ wt% (x=0.10, 0.15, 0.20, y=0.5 $\sim$ 3.0) specimens were fabricated by the mixed-oxide method and then the structural properties as a function of the composition ratio and $Al_2O_3$ contents were studied. All BSCT specimens showed dense and homogeneous structure without the presence of the seconds phase. The sintered density was decreased with increase ad $Al_2O_3$ content. The Curie temperature and dielectric constant at room temperature decreased with increasing $Al_2O_3$ content. The dielectric constant and dielectric loss of the doped-0.5 wt% $Al_2O_3$ BSCT(50/40/10) specimen were about 3131 and 0.932% at 1KHz, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.616-619
• /
• 2012

Oxides possess several interesting properties, such as ferroelectricity, magnetism, superconductivity, and multiferroic behavior, which can effectively be used oxide electronics based on epitaxially grown heterostructures. The microscopic properties of oxide interfaces may have a strong impact on the electrical transport properties of these heterostructures. It was recently demonstrated that high electrical conductivity and mobility can be achieved in the system of an ultrathin $LaAlO_3$ film deposited on a $TiO_2$-terminated $SrTiO_3$ substrate, which was a remarkable result because the conducting layer was at the interface between two insulators. In this study, we observe that the current-voltage characteristics exhibit $LaAlO_3$ thickness dependence of electrical conductivity in $TiO_2$-terminated $SrTiO_3$. We find that the $LaAlO_3$ layers with a thickness of up 3 unit cells, result in highly insulating interfaces, whereas those with thickness of 4 unit cells and above result in conducting interfaces.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.52.1-52.1
• /
• 2000