• 대한토목학회논문집
• /
• 제43권5호
• /
• pp.555-566
• /
• 2023

본 연구에서는 콘크리트 부재에 저온 적용을 위해 SOL-GEL 기법을 이용하여 제조된 열에너지 저장 복합상변화물질(CPCM)를 개발하였다. 코어는 테트라데칸, 지지재는 활성탄(AC)을 각각 사용하였다. 진공 함침법을 이용하여 AC의 다공성 구조에 테트라데칸 상변화 물질(PCM)을 함침시키고, 테트라에틸오르토실리케이트(TEOS)를 사용한 SOL-GEL 공정을 이용하여 제조된 복합체에 실리카 겔을 얇게 코팅하였다. CPCM의 열 성능은 시차주사열량계(DSC)과 열 중량분석(TGA)을 통해 분석했다. DSC 결과 테트라데칸 PCM은 용융 및 동결 온도가 각각 6.4℃ 및 1.3℃이고 해당 엔탈피는 각각 226J/g 및 223.8J/g인 것으로 나타났다. CPCM은 7.1℃ 및 2.4℃에서 용융 및 동결 과정에서 각각 32.98J/g 및 27.7J/g의 엔탈피를 나타내었다. TGA 시험 결과 AC는 500℃까지 열적으로 안정하며, 이는 120℃ 정도인 순수 테트라데칸의 분해 온도보다 훨씬 높은 것으로 나타났다. 또한, AC-PCM과 CPCM의 경우 각각 80℃와 100℃에서 열분해가 시작되었다. CPCM의 화학적 정성 분석을 위해 푸리에 변환 적외선(FT-IR) 분광법을 이용하였으며, 그 결과 개발된 복합체가 화학적으로 안정함을 확인하였다. 마지막으로, SOL-GEL 공정 후 AC 표면에 실리카 겔의 얇은 층이 존재함을 확인하기 위해 주사전자현미경(SEM)을 이용하여 AC와 CPCM의 표면 형태를 분석하였다.

• 대한화학회지
• /
• 제65권2호
• /
• pp.125-132
• /
• 2021

An electrochromic nickel oxide thin film was fabricated on a flexible PET/ITO substrate using a nanocrystallite- dispersed coating sol and bar coater. Nanocrystalline NiOx of 3-4 nm crystallite size was first synthesized by base precipitation and thermal conversion. This NiOx nanocrystallite powder was mechanically dispersed in an alcoholic solvent mixed with a silane binder to prepare a coating sol for thin film. This sol method is different from the normal sol-gel method in that it does not require the conversion of precursor by heat treatment. Therefore, this method provides a very facile method to prepare NiOx thin films on any kind of substrate and it can be easily applied to mass production. The electrochromic performance of this NiOx thin film on PET/ITO electrode with a thickness of about 400 nm was investigated in a nonaqueous LiClO4 electrolyte solution by cyclic voltammetric and repeated chronoamperometric measurements in conjunction with spectrophotometry. The visible light modulation of 44% and the colorization efficiency of 41 ㎠/C at 550 nm were obtained at the step potentials of -0.8/+1.2 V vs Ag and a duration of 30 s.

• Transactions on Electrical and Electronic Materials
• /
• 제4권4호
• /
• pp.18-21
• /
• 2003

Sol-gel processing of $BaTiO_3$ ceramics doped with La(0.01-1.00 at. $\%$) were prepared from metal barium, titanium n-butoxide and lanthanum iso-propoxide. Characterization of the sol-gel-derived powder using XRD, SEM is also reported. The obtained results showed that insulator to semiconductor transition for highly donor-doped barium titanate was closely related to the incorporation of donor into the grains and to the resultant grain size, which were significantly affected by the sinterability of $BaTiO_3$ powders and sintering conditions used.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.64-67
• /
• 2014

$Ni_{0.6}Zn_{0.4}Fe_2O_4$ prepared using solid state reaction and sol-gel methods were compared for their structural and magnetic properties. Due to the much higher annealing temperature used in solid state reaction, the crystalline size was much larger than that of the nanoparticles prepared by sol-gel. The saturation magnetization of sol-gel nanoparticles was higher, and the coercivity was about 2 times larger, compared to the solid state reaction sample. By analyzing the integration intensity of x-ray diffraction peaks (220) and (222), we proposed that the difference in the saturation magnetization might be due to the inversion of cation distribution caused by the different preparation techniques used.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.315-323
• /
• 1998

$Ti(i-OC_3H_7)_4$알콕사이드를 출발원료로 사용한 sol-gel법을 이용하여 Rutle, Anatase 결정상의 $TiO_2$박막을 제조하였다. 결정화 정도란 관점에서 $TiO_2$ 박막의 결정상에 미치는 첨가물의 영향을 조사하였다. 3차 비선형 광학 감수율을 THG법을 이용하여 측정하였으며, Rutle 과 Anatase 결정상의 $TiO_2$ 박막의 3차 비선형 광학 감수율은 각각 $1.4{\times}10^{-12}$과 $9.7{\times}10^{-13}$ esu의 값을 얻었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.94-98
• /
• 2000

Polycrystalline SBTN ferroelectric thin films were prepared by sol-gel method with various Nb mole ratios on Pt/ $SiO_2$/Si (100) substrates. The films were annealed at different temperatures and characterized in terms of phase and microstructure. Relatively a well saturated hysteresis pattern was obtained at x =0.2 in S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin films. At an applied voltage of 5V, the dielectric constant ($\varepsilon$$_{r}$) and dissipation factor (tan $\delta$) of typical S $r_{0.8}$B $i_{2.3}$(T $a_{1-x}$ N $b_{x}$)$_2$ $O_{9+}$$\alpha$/ thin film (x=0.2) were about 236.2 and 0.034. Measured remanent polarization (2Pr) and coercive field (Ec) were 4.28C/c $m_2$, and 38.88kv/cm respectively. No fatigue was observed up to 6$\times$10$_{10}$ switching cycles at 5V and the normalized polarization reduced by a factor of only 4%.%. 4%.%. 4%.%.%.%.%.

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.57-62
• /
• 1995

The coating condition of reproducible anti-reflective coating film and the light transmittance characteristics of the prepared anti-reflective coating glass were investigated as a study for the preparation of single-layer anti-reflective coating glasss. In case of coating with the sol in which the solvent was substituted with the ethanol with the addition of 0.1 mol HNO3, the coated glass showed the minimum value of the refractive index of 1.464, light transmittance of 94.2% at 550nm standard wavelength which is 3.2% higher than that of the parent glass, and the reflectance in the entire wave range of visible light. The refractive index represented its minimum at the sol concentration of 1.0 mol per 100mols of water and the higher the sol concentration, the higher the refractive index, resulting in the decrease of the light transmitance. The production condition of the reproducible anti-reflective coating on glass with the maximum transmittance of 94.2% was 4cm/min of withdrawal speed, 40$0^{\circ}C$ and 1 hour of heat treatment temperature and time, resulting in the film thickness of 94nm.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.479-487
• /
• 1988

In this study we studied the function of Glycerol as a DCCA(Drying Control Chemical Additives) in the preparation of silica bulk glas through Sol-Gel method. We used TEOS(Tetra Ethyl Ortho Silicate) and maintained the mixing ratio of TEOS : H2O : EtOH : HCI as 1 : 4 : 4 : 0.0007(mol) and varied glycerol input quantity from 0.1vol% considering the ethnaol input quantity as 100vol%. We investigated the changes from Sol-Gel Synthetic solutions to the glass using DT-TG, FT-IR and other instruments. The results obtained from this experiment showed that the dried gels made from the synthetic solutions containing 0.1-1.0vol% of glycerol were easily heat-treated up to 85$0^{\circ}C$ so that transparant bulk silica glass was prepared.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.676-681
• /
• 2001

ABS is a safety device, which adds hydraulic system to the existing brake system to prevent wheel from locking, so we can obtain maximum braking force on driving. The hydraulic system to control braking pressure consists of sol-flow type using solenoid valve, flow control valve or consists of sol-sol type using two solenoid valve. In this paper, the hydraulic system in ABS is composed of sol type using a 3port-2position solenoid valve, and vehicle system is composed of 1/4 vehicle model. And slip ratio is controlled using PWM (Pulse-Width-Modulation) control algorithm. Braking friction coefficient and tracking friction coefficient which are described by slip ratio's function have maximum value when slip ratio has its value from 0.1 to 0.3. And slip ratio is controlled constantly in this boundary value even in the variation of road's condition in some boundary.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.465-470
• /
• 2006

코팅은 플라스틱의 표면의 물성과 렌즈의 광학적 성능을 높이기 위해 필요하다. Allyl diglycol carbonate계열 렌즈의 표면의 물성과 광학적 성능을 개선하기 위하여 3-glycidoxypropyltrimethoxysilane(GPTS), methyltrimethoxysilane(MTMS) 및 tetraethyl orthosilicate(TEOS)의 몰 비를 변화시켜 유-무기 하이브리드 재료로 사용하였다. Sol-gel 공정에 의한 flow코팅하여, $140^{\circ}C$에서 4시간 경화하였다. 코팅 렌즈는 투과율, 부착력, 연필경도, 내마모성, 내온수성 및 내약품성을 평가하였고 GPTS, MTMS 및 TEOS의 몰 비가 각각 1:1:2일 때 가장 우수한 것으로 나타났다.