• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.3
• /
• pp.171-177
• /
• 2007

This study suggested a new method to stabilize molten salt wastes generated from the pyre-process for the spent fuel treatment. Using conventional sol-gel process, $SiO_2-Al_2O_3-P_2O_5$ (SAP) inorganic material that is reactive to metal chlorides were prepared. In this paper, the reactivity of SAP with the metal chlorides at $650{\sim}850$, the thermal stability of reaction products and their leach-resistance under the PCT-A test method were investigated. Alkali metal chlorides were converted into metal aluminosilicate($LixAlxSi1-_xO_{2-x}$) and metal phosphate($Li_3PO_4\;and\;Cs_2AlP_3O_{10}$) While alkali earth and rare earth chlorides were changed into only metal phosphates ($Sr_5(PO_4)_3Cl\;and\;CePO_4$). The conversion rate was about $96{\sim}99%$ at a salt waste/SAP weight ratio of 0.5 and a weight loss up to $1100^{\circ}C$ measured by thermogravimetric analysis were below 1wt%. The leach rates of Cs and Sr under the PCT-A test condition were about $10^{-2}g/m^2\;day\;and\;10^{-4}g/m^2\;day$. From these results, it could be concluded that SAP can be considered as an effective stabilizer for metal chlorides and the method using SAP will give a chance to reduce the volume of salt wasteform for the final disposal through further researches.

• Journal of Chest Surgery
• /
• v.29 no.9
• /
• pp.989-995
• /
• 1996

Excessive blood loss secondary to cardiopulmonary bypass(CPB) may be encountered after open heart surgery and platelet dysfunction appears to be especially responsible for this problem. To evaluate the effect of low-dose aprotinin during hypothermic CPB on platelet aggregation, anticoagulation and clinical hemostasis,.40 patients undergoing valve replacement using hypothermic CPB procedures were randomized to give either a low dose aprotinin(2$\times$ 106 KIU in the CPB priming sol- ution, n=20) or a placebo(n=20). During postoperative 24 hours, blood and hemoglobin loss were lower in the aprotinin group (225.5 $\pm$ 121.9ml, and 11.3$\pm$2.4g) than the control group(572.2$\pm$)35.5ml and 26.3$\pm$9.8g)(P<0.01). The total blood and hemoglobin loss were lower in the aprotinin group (622.0$\pm$ 186m1 and 14.7$\pm$6.8g) than the con- trol group (102.1 $\pm$483.5ml and 39.7$\pm$ 16.4g) (P<0.01). The amonut of packed red cell needed decreased in the aprotinin group: 197.7$\pm$56.3ml vers s 651.2: 147.5ml (P<0.01). Hemoglobin concentration, platelet counts and fibrinogen checked at fixed times perioperatively did not differ between the two groups. Platelet aggregation was induced by ADP, collagen, epinephrine and ristocetin before and after CPB. Maximum platelet aggregation was significantly reduced after CPB in control group (ranging from -31 % to -58% relative to prebypass values). Significant prolongation of activated clotting time(ACT) after 5 minute and 30 minute of hypothermic CPB were observed: 955.9 $\pm$35.1 and 967.5$\pm$32.7sec versus 743.8 $\pm$ 52.1 and 731.2: 54.6sec (P<0.01). There was no complication associated with aprotinin infusion. These results demonstrate that low-dose aprotinin significantly reduces blood loss and blood requirment and provides improved postoperative hemostasis which might be related to protection of platelet aggregation capacity.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2006

Lithium titanium oxide $(Li_4Ti_5O_{12})$ with spinel-framework structures as anode material for lithium-ion battery was prepared by sol-gel and high energy ball milling (HEBH) method. According to the X-ray diffraction (XRD), Particle Size Analyses(PSA) and scanning electron microscopy (SEM) analysis, uniformly distributed $Li_4Ti_5O_{12}$ particles with grain sizes of 100 nm were observed. Half cells, consisting of $Li_4Ti_5O_{12}$ as working electrode and lithium foil as both counter and reference electrodes showed the high performance of high rate discharge capacity and 173 mAh/g at 0.2C in the range of $1.0\sim2.5 V$. Furthermore, the crystalline structure of $Li_4Ti_5O_{12}$ didn't transform during the lithium intercalation and deintercalation process.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.913-918
• /
• 2014

Five mol % tungsten-doped tin oxide ($W_{0.05}Sn_{0.95}O_2$, TTO5) was prepared by co-precipitation of $SnCl_4{\cdot}5H_2O$ and $WCl_4$, followed by calcination at $1000^{\circ}C$. The as-prepared TTO5 was in the pure cassiterite phase with a particle size of ~50 nm and optical bandgap of 2.51 eV. Herein it was applied for the formation of TTO5/$TiO_2$ heterojunctions by covering the TTO5 surface with $TiO_2$ by sol-gel method. Under visible-light irradiation (${\lambda}{\geq}420$ nm), TTO5/$TiO_2$ showed a significantly high photocatalytic activity in removing gaseous 2-propanol (IP) and evolving $CO_2$. It is deduced that its high visible-light activity is caused by inter-semiconductor holetransfer between the valence band (VB) of TTO5 and $TiO_2$, since the TTO5 nanoparticle (NP) exhibits the absorption edge at ~450 nm and its VB level is located more positive side than that of $TiO_2$. The evidence for the hole-transport mechanism between TTO5 and $TiO_2$ was also investigated by monitoring the holescavenging reaction with 1,4-terephthalic acid (TA).

• Journal of Electrochemical Science and Technology
• /
• v.6 no.4
• /
• pp.121-130
• /
• 2015

The micro emulsion method has been successfully used for preparing perovskite LaCoO₃ with uniform, fine-shaped nanoparticles showing high activity as electro catalysts in oxygen reduction reactions (ORRs). They are, therefore, promising candidates for the air-cathode in metal-air rechargeable batteries. Since the activity of a catalyst is highly dependent on its specific surface area, nanoparticles of the perovskite catalyst are desirable for catalyzing both oxygen reduction and evolution reactions. Herein, LaCoO₃ powder was also prepared by sol-gel method for comparison, with a broad particle distribution and high agglomeration. The electro catalytic properties of LaCoO₃ and LaCoO₃-carbon Super P mixture layers toward the ORR were studied comparatively using the rotating disk electrode technique in 0.1 M KOH electrolyte to elucidate the effect of carbon Super P. Koutecky-Levich theory was applied to acquire the overall electron transfer number (n) during the ORR, calculated to be ~3.74 for the LaCoO₃-Super P mixture, quite close to the theoretical value (4.0), and ~2.7 for carbon-free LaCoO₃. A synergistic effect toward the ORR is observed when carbon is present in the LaCoO₃ layer. Carbon is assumed to be more than an additive, enhancing the electronic conductivity of the oxide catalyst. It is suggested that ORRs, catalyzed by the LaCoO₃-Super P mixture, are dominated by a 2+2-electron transfer pathway to form the final, hydroxyl ion product.

• Journal of Acupuncture Research
• /
• v.33 no.1
• /
• pp.103-116
• /
• 2016

Objectives : This study was performed to assess the effectiveness of conservative Korean traditional medical treatment on lumbar intervertebral disc herniation in 12 adolescents. Methods : Data were collected from adolescent patients diagnosed with lumbar intervertebral herniation by MRI, hospitalized at Jaseng Korean Medicine Hospital from January 1, 2014 to December 31, 2015. A total of 12 patients were included in the study. Patients were treated by acupuncture, pharmacopuncture, electroacupuncture, herbal medicine, chuna manual therapy, physical therapy during hospitalization period. To measure treatment outcomes, a verbal numerical rating scale (VNRS), Oswestry disability index (ODI), range of motion (ROM), Straight leg raising test (SLR), and EQ-5D were used. Results : The average age of the participants was $16.05{\pm}1.62$. The average of duration of symptom was $19.25{\pm}26.83(weeks)$ and the average length of hospitalization was $23.8{\pm}16.4(days)$. 2 patients (17 %) suffered from only lumbar pain, while 10 patients (83 %) suffered from lumbar and leg pain. No participant suffered from only leg pain. 8 patients (67 %) were diagnosed with disc herniation in one segment, and 4 patients (33 %) were diagnosed with disc herniation in multiple segments. A total of 17 disc segments (28 %) were herniated. The most herniated lumbar level was L4-5. 3 segments were diagnosed with bulging (17 %), 6 with protrusion (35 %), and 8 with extrusion (47 %). Extrusion was the most frequent herniated type. After treatment, the average VNRS of lumbar pain significantly decreased from $5.58{\pm}1.62$ to $2.91{\pm}1.56$ (p<0.001) and the average VNRS of leg pain significantly decreased from $5.16{\pm}2.51$ to $3.08{\pm}1.8$ (p<0.001). ODI significantly decreased from $48.87{\pm}18.72$ to $28.57{\pm}15.05$ (p<0.05), and EQ-5D significantly increased $0.58{\pm}0.31$ to $0.80{\pm}0.12$ (p<0.05). Range of flexion significantly improved from $61.25{\pm}32.62$ to $68.33{\pm}26.22$ (p<0.05). Conclusion : Conservative Korean Traditional Medical Treatment may be effective in the treatment of lumbar intervertebral disc herniation in adolescence. However, more case reports and clinical research are needed.

• Journal of Korean Clinical Health Science
• /
• v.4 no.2
• /
• pp.550-555
• /
• 2016

Purpose. We compared with the refracting power and aberration according to the measurement change in illumination and the pupils area by using the auto refraction instruments. Methods. In this study it were examined 64 eyes without eye disease, 21.4 (${\pm}2.54$) age, 32 (male 10, female 22) patients. Experiments in general illumination using the auto refraction instruments (HRK-8000A, Huvitz, Korea) was measured in both eyes 3 times and after scotopic for 30 minutes in a dark room blocked the light was measured in the same way. Aberration were measured coma, spherical aberration, high and low order aberrations in a general illumination (3500 lux) and low illumination (5 lux) of the pupil area 3.96 mm and 5.96 mm. Results. In the general illumination for measuring of the pupil area, the refractive power, coma, spherical aberration and low order aberration was no significant difference. In the low illumination, spherical aberration of the pupil area was $0.005({\pm}0.015){\mu}m$ in a 3.96mm, $0.014({\pm}0.020){\mu}m$ in a 5.96 mm and appeared a significant difference(p = 0.003). In general and low illumination on the results of comparing the measured values of the refractive power and aberration at the pupil area 3.96 mm, high order aberrations was $0.205({\pm}0.145){\mu}m$ in general illumination, $0.132({\pm}0.075){\mu}m$ in low illumination and appeared a significant differences(p = 0.001). High order aberrations at the pupil area 5.96 mm was $0.278({\pm}0.244){\mu}m$ in general illumination, $0.150({\pm}0.092){\mu}m$ in low illumination and appeared a significant differences(p = 0.000). Conclusions. When the eye refractive power measured by the automatic refraction does not depend on the illumination conditions and size of the observation pupil area, it was found that aberrations are affected by the illumination and the observation pupil area. It was found that the eye examination chamber illumination to obtain accurate measurement produces better results to decrease than to increase.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.9
• /
• pp.1328-1334
• /
• 2010

Low-trans spread fat (LTSF) was produced by lipase-catalyzed synthesis of canola (CO) and fully hydrogenated soybean oil (FHSBO) at 65:35 (w/w). Blend of CO and FHSBO with 65:35 ratio was interesterified using Lipozyme TLIM (immobilized Thermomyces lanuginosus, 20% of total substrate) in a 1 L-batch type reactor at $70^{\circ}C$ with 500 rpm for 24 hr. Then, physicochemical melting properties of LTSF were compared with commercial spread fat. At $20^{\circ}C$, solid fat contents (SFC) of commercial spread fat as a control and LTSF were similar, showing 19.1 and 18.1%, respectively. Major compositional fatty acids of LTSF were C18:0, C18:1 and C18:2 (29.2, 41.8 and 13.3 wt%, respectively). Trans fatty acid content of the LTSF (0.2 wt%) was lower than that of commercial spread fat (5.5 wt%). In the RP-HPLC analysis from LTSF, major triacylglycerol (TAG) molecules were SOL (stearoyl-oleoyl-linoleyl), SOO, POS/PSP, and SOS. Also, polymorphic form and x-ray diffraction of LTSF showed coexistence of $\beta$' and $\beta$ form crystals.

• Journal of Ginseng Research
• /
• v.24 no.3
• /
• pp.143-147
• /
• 2000

In previous studies we have demonstrated that several individual ginsenosides such as Rc, Rd, Re and Ri relieves formalin-induced pain following systemic treatment. But it is unknown where these single ginsenosides induce antinociception. We investigated the antinoiceptive effect of four individual ginsenosides on formalin-induced pain after intrathecal (i.t.), intracereventricular (i.c.v.), or subcutaneous (s.c.) administration using mice. We found that ginsenoside Rc, Rd, and Re except Rf attenuated both acute and tonic phase of pain. Ginsenoside Rf attenuated only tonic phase of pain after i.t. administration. The ED$\_$50/ was 1.0 (0.55∼l.75 mg/kg) for Rc, 1.15 (0.6∼2.25 mg/kg) for Rd, and 8.9 (3.9∼20.5 mg/kg) for Re in acute phase of pain. The ED$\_$50/ was 0.3 (0.1∼0.85 mg/kg) for Rc, 0.6 (0.35∼l.1 mg/kg) for Rd, 2.45 (1.25∼4.65 mg/kg) for Re, and 1.9 (1.5∼4.25 mg/kg) for Rf in tonic phase of pain. We also found that ginsenoside Rc, Rd, Re, and Rf after i.c.v. administration attenuated both acute and tonic phase of pain. The ED5o for acute phase of pain was 0.9 (0.55∼l.4mg/kg) for Rc, 0.9 (0.45∼1.7 mg/kg) for Rd, 0.93 (0.5∼l .75 mg/kg) for Re, and 1.85 (0.95∼3.5 mg/kg) for Rf. The ED$\_$50/ for tonic phase of pain was 0.7 (0.45∼1.05 mg/kg) for Rc,1.25 (0.7∼2.2 mg/kg) for Rd, 0.85 (0.45∼1.6 mg/kg) for Re, and 0.8 (0.4∼1.45 mg/kg) for Rf. Thus, the order of the analgesic potency was Rc$\geq$Rd>Re>Rf in both i.t. and i.c.v. administration routes. However, s.c. pretreatment of four ginsenosides did not reduce formalin-induced pain. These results suggest that analgesic effect of ginsenosides is achieved through spinal or supraspinal site(s) in formalin test.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.5-14
• /
• 2023

In this study, LiDAR-reflective black hollow-structured silica/titania(B-HST) materials are successfully synthesized by employing the NaBH₄ reduction and etching method on silica/titania core/shell(STCS) materials, which also effectively enhance near-infrared(NIR) reflectance. Moreover, core-etched supernatant solutions are collected and recycled for the synthesis of extracted silica(e-SiO₂) process, which successfully applies as filler materials for semiconductor epoxy molding compound(EMC). In detail, B-HST materials, fabricated by the sequential experimental steps of sol-gel, reduction, and sonication-mediated etching method, manifest blackness(L^*) of 13.2 similar to black paint and excellent NIR reflectance(31.1%). Consequently, B-HST materials are successfully prepared as LiDAR-reflective black materials. Additionally, core-etched supernatant solution with silanol precursors are employed for synthesis of homogeneous silica filler materials via sol-gel method. As-synthesized silica fillers are incorporated with epoxy resin and carbon black for the preparation of semiconductor EMC. Experimentally synthesized EMC exhibits comparable mechanical-chemical properties to commercial EMC. Conclusively, this study successfully proposes designing procedure and practical experimental method for simultaneously synthesizing the NIR-reflective black materials for self-driving vehicles and EMC materials for semiconductors, which are materials suitable for the industrial 4.0 era, and presented their applicability in future industries.