• Geomechanics and Engineering
• /
• v.10 no.4
• /
• pp.527-546
• /
• 2016

This paper discusses improvements of compressibility, permeability, static and liquefaction strengths of in-situ soils by grouting. Both field testing and laboratory evaluation of the on-site samples were conducted. The improvement of soils was influenced by two main factors, i.e., the grout materials and the injection mechanisms introduced by the field grouting. On-site grout mapping revealed the major mechanism was fracturing accompanied with some permeation at deeper zones of sandy soils, where long-gel time suspension grout and solution grout were applied. The study found the compressibility and swelling potential of CL soils at a 0.5 m distance to grout hole could be reduced by 25% and 50%, respectively, due to the grouting. The effect on hydraulic conductivity of the CL soils appeared insignificant. The grouting slightly improved the cohesion of the CL soils by 10~15 kPa, and the friction angle appeared unaffected. The grouting had also improved the cohesion of the on-site SM soils by 10~90 kPa, while influences on the friction angle of soils were uncertain. Liquefaction resistances could be enhanced for the sandy soils within a 2~3 m extent to the grout hole. Average improvements of 40% and 20% on the liquefaction resistance were achievable for the sandy soils for earthquake magnitudes of 6 and ${\geq}7.5$, respectively, by the grouting.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.59-59
• /
• 1999

In this study, planer inductively coupled $Cl_2$ based plasmas were used to etch InGaN and the effects of plasma conditions on the InGaN etch properties have been characterized using quadrupole mass spectrometry(QMS) and optical emission spectroscopy(OES). As process conditions used to study the effects of plasma characteristics on the InGaN etch properties, $Cl_2$ was used as the main etch gas and $CHF_3,{\;}CH_4$, and Ar were used as additive gases. Operational pressure was varied from SmTorr to 3OmTorr, inductive power and bias voltage were varied from 400W to 800W and -50V to -250V, respectively while the substrate temperature was fixed at 50 centigrade. For the $Cl_2$ plasmas, selective etching of GaN to InGaN was obtained regardless of plasma conditions. The small addition of $CHF_3$ or Ar to $Cl_2$ and the decrease of pressure generally increased InGaN etch rates. The selective etching of InGaN to GaN could be obtained by the reduction of pressure to l5mTorr in $CI_2/IO%CHF_3{\;}or{\;}CI_2/IO%Ar$ plasma. The enhancement of InGaN etch rates was related to the ion bombardment for $CI_2/Ar$ plasmas and the formation of $CH_x$ radicals for $CI_2/CHF_3(CH_4)$ plasmas.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.186-192
• /
• 2010

Streptococcus mutans, one of the major causal agents of dental caries, is component of the dental plaque. It produces various organic acids such as lactic acid which is the end-product of glycolysis, and this leads to dental caries. A new system using species-specific monoclonal antibodies was developed to detect Streptococcus mutans in saliva. The system quickly detects salivary Streptococcus mutans in 30min and classifies the result into two levels. The purpose of this study was to investigate correlation between monoclonal antibody-based detecting system and selective medium-based detecting methods. Children's deft indices were also compared with Streptococcus mutans counts in MSB agar plate. Subjects consisted of 15 children in the age of 3 to 6 years. They were assigned to three groups : Group I(deft index = 3), Group II(deft index $\leqq$3), Group III(deft index $\geqq$4). The results are as follows : 1. The rate of children with positive response was 13.3% and with negative response was 86.7% in the result of Saliva-checkTM Mutans test kit. 2. There was a positive correlation between monoclonal antibody-based detecting system and selective medium-based detecting methods(p<0.05). 3. Streptococcus mutans counts in MSB agar plate were irrelevant to deft of children(p=0.34).

• The korean journal of orthodontics
• /
• v.22 no.4 s.39
• /
• pp.881-920
• /
• 1992

This study was designed to assess profile preferences among Korean youths in the year 1992. Facial esthetics was evaluated by means of silhouette profiles, eliminating the influence of a number of aspects that may affect judgment when normal lateral photographs are used. The main points of preference to be clarified here are as follows. First, on facial convexity, Second, on nasion depth, Third, on mentolabial sulcus depth, Fourth, on the position of upper and lower lips, Fifth, on facial type according to Angle's classification of malocclusion, Sixth, on Song's tangents. The 54 subjects printed in questionnaire as black and white silhouettes were selected from 300 tracings from cephalometric radiographs of people whose age ranging from 11 to 20 years. Photographs of six female subjects were retouched by computer graphic software and printed in color and black/white photographs which were used for adaptation of eyes of participants in selecting profiles in silhouette. They constitute 2 questions. The 54 subjects were grouped as 22 questions, each of them composed of 6 subjects, according to the aspects to be clarified. Twenty four questions in total were asked to assess profile preferences. For the assessment, the profile line, the facial esthetic triangle, Song's tangents, and Angle's classification of malocclusion were introduced. The profile line is composed of 11 component points which are Trichion, Glabella, Nasion, Pronasale, Subnasale, Labrale superius, Stomion, Labrale inferius, Supramentale, Pogonion, and Gnathion. The facial esthetic triangle is composed of 3 tangents: A-tangent which is the tangent of dorsum of nose, B-tangent which is the line passing through Sn and Ls, and C-tangent which is drawn on the turning point of the curve which lies between mentolabial sulcus (Sm) and pogonion (Pg). Angle's classification has 3 types of malocclusion which are Class I, Class II, and Class III. Class II malocclusion is subdivided into Division 1 and Division 2. The participants of the survey were composed of 861 college students (448 male students, 413 female students) whose majors grouped as Fine Arts. Liberal Arts, and Natural Sciences, and whose mean age 21.8 years. The statistics program SPSS/PC + of SPSS Inc. was used to analyze answers of participants. Crosstabulation, Chi-square test, and Kendall test were done. The conclusions are as follows: First, Korean youths have a tendency to prefer the slightly convex face to the flat or concave face. Second, they prefer a moderately deep nasion. Third, they prefer a moderately deep mentolabial sulcus. Fourth, they prefer the position of lips which are near to Ricketts' E-line. The position of the upper lip which is slightly posterior to E-line is preferred. The upper lip which lies too far anterior or posterior to the lower lip is not perferred. Fifth, they prefer most, according to Angle's Classification of Malocclusion, Class I facial profile which has a slight inclination to Class II division 2. The order of preference is Class I, Class II division 2, Class III, and Class II division 1. Sixth, they prefer the type 2 and 3 of Song's tangents. The facial profile within which A-and B-tangent meet is preferred. The facial profile which has Cotangent that .meets with A-tangent slightly posterior to the crossing point of A-and B-tangent or that parallels with B-tangent is preferred.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.657-664
• /
• 2011

The plant community of water`s edge was investigated using the methodology of the Z-M school of phytosociology, from March to October, 2008, 2011. The results were obtained as follow ; hygrophyte hydrophye of 2008 year of this area consist of 38 taxa : 1 varieties, 37 species, 31 genera, 21 families and 14 orders, hygrophyte hydrophye of 2011 year of this area consist of hygrophyte 15 species, 13 species were reduced by approximately 13.33%. And emerged hydrophyres did not show a change. 9 species, 4 species of Floating-Leaved hydrophyres 55.56%, Submerged hydrophyres of the 4 species, 1 species, 75%, Free-Floating hydrophyres remarkable I the 3 species was reduced to 33.33%, respectively. Plants Community of the water's edge was classified into 16 communities as follows; (Leersia japonica community, Spirodela polyrhiza community, Miscanthus sacchariflorus community, Hydrocharis dubia community, Zizania latifolia community, Paspalum distichum var. indutum community, Leersia japonica-Hydrocharis dubia community, Salix glandulosa community, Trapa japonica community, Humulus japonicus community, Nelumbo nucifera community, Carex dimorpholepis community, Salix koreensis community, Trapa japonica-Spirodela polyrhiza community, Persicaria thunbergii). Higher in 2011 than in 2008, the ratio was reduced to Leersia japonica community. Between July-August by a sudden change in the rate of water storage changes in vegetation are thought to have appeared.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.213-232
• /
• 2009

This document was prepared to review and summarize the analytical methods for airborne and bulk asbestos. Basic principles, shortcomings and advantages for asbestos analytical instruments using phase contrast microscopy(PCM), polarized light microscopy(PLM), X-ray diffractometer (XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM) were reviewed. Both PCM and PLM are principal instrument for airborne and bulk asbestos analysis, respectively. If needed, analytical electron microscopy is employed to confirm asbestos identification. PCM is used originally for workplace airborne asbestos fiber and its application has been expanded to measure airborne fiber. Shortcoming of PCM is that it cannot differentiate true asbestos from non asbestos fiber form and its low resolution limit ($0.2{\sim}0.25{\mu}m$). The measurement of airborne asbestos fiber can be performed by EPA's Asbestos Hazard Emergency Response Act (AHERA) method, World Health Organization (WHO) method, International Standard Organization (ISO) 10312 method, Japan's Environmental Asbestos Monitoring method, and Standard method of Indoor Air Quality of Korea. The measurement of airborne asbestos fiber in workplace can be performed by National Institute for Occupational Safety and Health (NIOSH) 7400 method, NIOSH 7402 method, Occupational Safety and Health Administration (OSHA) ID-160 method, UK's Health and Safety Executive(HSE) Methods for the determination of hazardous substances (MDHS) 39/4 method and Korea Occupational Safety and Health Agency (KOSHA) CODE-A-1-2004 method of Korea. To analyze the bulk asbestos, stereo microscope (SM) and PLM is required by EPA -600/R-93/116 method. Most bulk asbestos can be identified by SM and PLM but one limitation of PLM is that it can not see very thin fiber (i.e., < $0.25{\mu}m$). Bulk asbestos analytical methods, including EPA-600/M4-82-020, EPA-600/R-93/116, OSHA ID-191, Laboratory approval program of New York were reviewed. Also, analytical methods for asbestos in soil, dust, water were briefly discussed. Analytical electron microscope, a transmission electron microscope equipped with selected area electron diffraction (SAED) and energy dispersive X-ray analyser(EDXA), has been known to be better to identify asbestiform than scanning electron microscope(SEM). Though there is no standard SEM procedures, SEM is known to be more suitable to analyze long, thin fiber and more cost-effective. Field emission scanning electron microscope (FE-SEM) imaging protocol was developed to identify asbestos fiber. Although many asbestos analytical methods are available, there is no method that can be applied to all type of samples. In order to detect asbestos with confidence, all advantages and disadvantages of each instrument and method for given sample should be considered.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.15-21
• /
• 1984

In order to ascertain the practical possibility of home made retort pouches for production of retort pouch foods in factory, two kinds of retortable pouches, i. e. 3 ply film (polyester film/Al. foil/casting polypropylene) and 4 ply film(polyester film/Al. foil/nylon/casting poll·propylene) were developed in Korea, and then, their physical properties, such as physical strength, heat resistance during thermal processing and preservability of foods and sanitary safety, were tested and compared with the foreign made pouches. The results obtained were summarized as follows. a. The physical strength of home made retort pouches in processing model foods(soybean oil 5 %, acetic acid 2%, starch 5 % and water to 100 %) was equal to that of foreign made pouches at accelerated examination condition($38^{\circ}C$, 98 % RH). But the lamination strength of home made products was a little bit superior to that of foreign made products. b. Home made retort pouches(SAMA-4 ply and SAMA-3 ply pouch) packed with rice or curry was possible to bear the thermal processing at $135^{\circ}C$ and shelf-life was one year or more at ambient temperature($20^{\circ}C$). c. Sanitary safety test showed that these home made retort pouches were acceptable comparing to the regulation recommended by the Ministry of Health and Social Affairs.

• The Journal of Korean Medicine
• /
• v.29 no.3
• /
• pp.88-99
• /
• 2008

Objectives: In order to identify the anti-inflammatory and analgesic properties of Salvia miltiorrhiza (Dan-Sam), widely used in Korean traditional medicine, an in vitro screening system was designed using pGL3, a luciferase reporter vector, and the tumor necrosis factor (TNF)-${\alpha}$ and cyclooxygenase (COX)-2 as target genes. Methods: The promoter regions of each gene were generated by PCR using the human chromosome as template DNA, and inserted into pGL3 vector with Kpn I and Hind III. The final construct was transfected into human myelomonocytic leukemia cells (U-937) that could be differentiated and activated by phorbol 12-myristate 13-acetate (PMA) or lipopolysaccharide (LPS). Using this system, the anti-inflammatory and analgesic effects of several herbal extracts regarded to have the medicinal effects of diminishing body heat and complementing Qi were tested. The chemicals PD98059 and berberine chloride were used as controls of the transcriptional inhibitors of TNF-${\alpha}$ and COX-2, respectively. Results: Salvia miltiorrhiza (Dan-Sam) demonstrated significant decrease of TNF-${\alpha}$ and COX-2 mRNA in the in vitro assay system. In MTT assay, Salvia miltiorrhiza (Dan-Sam) did not significantly inhibit the survival and proliferation of human myelomonocytic leukemia cells (U-937). Conclusions: Salvia miltiorrhiza (Dan-Sam) was found to exhibit the significant medicinal properties of anti-inflammatory and analgesic effects.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.5
• /
• pp.439-446
• /
• 2009

The biosynthesis study of antibiotics saframycin (SFM) in Streptomyces lavendulae and safracin (SAC) in Pseudomonas fluorescens demonstrated that 3-hydroxy-S-methyl-O-methyltyrosine (3hSmOmTyr), a nonproteinogenic amino acid, is the precursor of the tetrahydroisoquinoline molecular core. In the biosynthetic gene cluster of SAC/SFM, sacD/sfmD encodes a protein with high homology to each other but no sequence similarity to other known enzymes; sacF/sfmM2 and sacG/sfmM3 encode methyltransferases for C-methylation and O-methylation; and sacE/sfinF encodes a small protein with significant sequence similarity to the MbtH-like proteins, which are frequently found in the biosynthetic pathways of non ribosomal peptide antibiotics and siderophores. To address their function, the biosynthetic cassette of 3h5mOmTyr was heterologously expressed in S. coelicolor and P. putida, and an in-frame deletion and complementation in trans were carried out. The results revealed that (i) SfmD catalyzes the hydroxylation of aromatic rings; (ii) sacD/sacF/sacG in the SAC gene cluster and sfmD/sfmM2/sfmM3 in the SFM cluster are sufficient for the biosynthesis of 3h5mOmTyr; and (iii) the mbtH-like gene is not required for the biosynthesis of the 3h5mOmTyr precursor.

• Food Science of Animal Resources
• /
• v.36 no.6
• /
• pp.819-828
• /
• 2016

Muscle fiber characteristics account for meat quality and muscle fibers are mainly classified into three or more types according to their contractile and metabolic properties. However, the majority of previous studies on bovine skeletal muscle are based on myosin ATPase activity. In the present study, the differences in the characteristics of muscle fibers classified by the expression of myosin heavy chain (MHC) among four bovine skeletal muscles such as longissimus thoracis (LT), psoas major (PM), semimembranosus (SM) and semi-tendinosus (ST) and their relationships to beef quality were investigated. MHCs 2x, 2a and slow were identified by LC-MS/MS and IIX, IIA and I fiber types were classified. PM, which had the smallest size and highest density of fibers regardless of type, showed the highest myoglobin content, CIE $L^*$, $a^*$, $b^*$ and sarcomere length (p<0.05), whereas ST with the highest composition of IIX, showed high shear force and low sarcomere length (p<0.05). The correlation coefficients between muscle fiber characteristics and meat quality showed that type IIX is closely related to poor beef quality and that a high density of small-sized fibers is related to redness and tenderness. Therefore, the differences in meat quality between muscles can be explained by the differences in muscle fiber characteristics, and especially, the muscles with good quality are composed of more small-sized fibers regardless of fiber type.