• 약학회지
• /
• 제33권2호
• /
• pp.111-117
• /
• 1989

The optimum reaction conditions for the acid consuming capacity of aluminum silicate synthesized from the reaction of sodium silicate solution and potassium aluminum sulfate solution were investigated by Box-Wilson experimental design, and the micromeritic properties were examined by the means of BET $N_2$ adsorption, Hg penetrometer and methylen blue adsorption. The chemical composition of the samples were analyzed by gravitic method. The results were found to be as follows: optimum reaction temperature $54.7^{\circ}C$, both concentrations of reactant soln 15.7%, reactants molar ratio (Al/Si) 0.5 and drying temperature $65.0^{\circ}C$. The acid consuming capacity of the sample prepared by above optimum conditions was 68 ml and the chemical composition was $Al_2O_3{\cdot}3.6SiO_2{\cdot}3H_2O$. The relationship between acid consuming capacity and micromeritic properties could not found in the range of experiments. Therefore, it is assumed that the acid consuming mechanism of aluminum silicate depends on the neutralization of $Al_2O_3$ and buffer action of $SiO_2$ in sample.

• 한국재료학회지
• /
• 제30권8호
• /
• pp.399-405
• /
• 2020

In the present investigation we show the effect of Al doping on the length, size, shape, morphology, and sensing property of ZnO nanorods. Effect of Al doping ultimately leads to tuning of electrical and optical properties of ZnO nanorods. Undoped and Al-doped well aligned ZnO nanorods are grown on sputtered ZnO/SiO₂/Si (100) pre-grown seed layer substrates by hydrothermal method. The molar ratio of dopant (aluminium nitrate) in the solution, [Al/Zn], is varied from 0.1 % to 3 %. To extract structural and microstructural information we employ field emission scanning electron microscopy and X-ray diffraction techniques. The prepared ZnO nanorods show preferred orientation of ZnO <0001> and are well aligned vertically. The effects of Al doping on the electrical and optical properties are observed by Hall measurement and photoluminescence spectroscopy, respectively, at room temperature. We observe that the diameter and resistivity of the nanorods reach their lowest levels, the carrier concentration becomes high, and emission peak tends to approach the band edge emission of ZnO around 0.5% of Al doping. Sensing behavior of the grown ZnO nanorod samples is tested for H₂ gas. The 0.5 mol% Al-doped sample shows highest sensitivity values of ~ 60 % at 250 ℃ and ~ 50 % at 220 ℃.

• 한국광물학회지
• /
• 제19권1호통권47호
• /
• pp.7-14
• /
• 2006

현대 산업사회의 큰 문제로 대두되고 있는 도시소각재를 용융시킨 용융슬래그를 출발물질로 하여 부가가치가 높은 P형 제올라이트를 "hydrogelation"법과 "clay conversion"법을 혼합한 새로운 방법에 의해 수열합성하였다. 출발물질은 용융슬래그 이외에 Si 공급원으로 시판되는 규산소다용액을, Al 공급원으로는 $Na_{2}O/Al_{2}O_{3}$의 비가 약 1.2인 알루민산소다용액을 사용하였다. $80^{\circ}C$의 반응 온도에서 P형 제올라이트의 최적합성조건은 $SiO_{2}/Al_{2}O_{3}$의 비율 $3.2{\sim}4.2,\;H_{2}O/Na_{2}O$의 비율 $70.7{\sim}80.0$, 그리고 반응시간이 15시간 이상일 때이었다. P형 제올라이트가 합성되었을 때, 크기가 일정하지 않은 용융슬래그 입자들은 용해되어 사라졌으며, 그 대신 균일한 크기의 P형 제올라이트 결정이 형성되었다. 암모니움 아세테이트법에 의해 측정된 합성 제올라이트의 양이온 교환능은 240cmol/kg 정도이었다.

• 공업화학
• /
• 제10권8호
• /
• pp.1129-1135
• /
• 1999

${\gamma}-Al_2O_3$, $TiO_2$와 $SiO_2$에 코발트를 함침시켜 촉매를 제조하고, 고정층 미분반응기에서 CO에 의한 $SO_2$환원반응 특성을 조사하였다. 이때 온도는 $350{\sim}550^{\circ}C$ 영역에서, $SO_2$농도를 1000~10000 ppm, $CO/SO_2$몰비를 1.0~3.0, 공간속도를 $5000{\sim}15000h^{-1}$의 영역에서 사용하였으며 대기압하에서 실행하였다. ${\gamma}-Al_2O_3$와 $TiO_2$는 코발트 담체로 우수한 특성을 보였으며, 5 wt % 코발트를 ${\gamma}-Al_2O_3$에 함침시켜 얻은 촉매로 $400^{\circ}C$ 이상의 온도에서 90% 이상의 높은 $SO_2$전환율과 6% 이하의 낮은 COS수율을 얻을 수 있었다. $CO/SO_2$의 최적몰비는 양론비인 2.0으로 나타났으며, 몰비가 3.0으로 증가하면 $SO_2$전환율은 증가하였으나 대부분의 반응생성물이 COS로 나타났다. 실험영역의 $SO_2$농도와 공간속도의 변화는 $SO_2$ 전환율과 반응선택성에 큰 영향을 미치지 않았다. 코발트는 활성화된 이후에 $CoS_2$ 상태로 존재하였으며 반응후에도 상변화는 관찰되지 않았다.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.40-45
• /
• 2011

In this study, the composition of optical glass for GMP(glass molding process) was designed with 'Design of Experiments' method. All the composition batch was performed by 'Create Factorial Design' method. Particularly, $SiO_2$, BaO and $Al_2O_3$ were chosen major parameters for investigating the effects of components on optical and thermal properties. BaO and $Al_2O_3$ strongly influenced on optical and thermal properties, respectively. Finally, the approximate values of desired optical and thermal values were obtained by microtuning of compositions. At the composition of $BaO:Al_2O_3:SiO_2$=10:4:48 (molar ratio), refractive index($n_d$) was 1.5833, coefficient of thermal expansion(CTE) was $104{\times}10^{-7}/^{\circ}C$.

• 한국건축시공학회지
• /
• 제24권2호
• /
• pp.181-191
• /
• 2024

석회석은 시멘트의 주원료로써 90% 이상을 사용하고 있으며, 고온 소성 과정에서 및 석회석의 탈탄산 반응으로 많은 양의 CO₂를 배출한다. 이에 석회석 사용량 저감을 위해 원료를 대체할 수 있는 부산물에 관한 연구들이 진행 중이다. 또한 광물 탄산화는 기체인 CO₂를 탄산염 광물로 전환하는 기술로 산업시설에서 배출되는 CO₂를 포집하여 광물로 저장 및 자원화할 수 있다. 한편, 건설폐기물은 계속적으로 증가하는 추세로, 폐콘크리트는 많은 부분을 차지하고 있다. 폐콘크리트는 파쇄 및 분쇄를 통해 순환골재로써 활용되고 있으나 이때 발생하는 폐콘크리트 미분말은 유효하게 재이용 되지 못하고 대부분 폐기 또는 매립되는 실정이다. 이에 본 연구에서는 폐콘크리트를 석회석 대체재로써 활용하여 광물 탄산화 기술을 적용할 수 있는 이산화탄소 반응경화 시멘트 제조 가능성을 확인하고자 한다. 폐콘크리트 미분말 치환율 및 이산화탄소 반응 경화 시멘트의 주요 광물이 생성되는 조건인 SiO₂/(CaO+SiO₂) 몰비에 따른 광물 분석 결과, 폐콘크리트 미분말 치환율과 SiO₂/(CaO+SiO₂) 몰비가 높을수록 주요 광물인 Pseudowollastonite와 Rankinite 생성량이 증가하였다. 또한 세 가지 SiO₂/(CaO+SiO₂) 몰비에서 공통적으로 폐콘크리트 미분말을 50% 치환한 경우 Gehlenite가 생성되었으며, 생성량 또한 유사하였다. 이는 콘크리트 미분말에 함유하고 있는 Al₂O₃ 성분이 CaO와 SiO₂와 반응하여 Gehlenite가 합성된 것으로 판단된다. Gehlenite의 경우 Pseudowollastonite와 Rankinite와 같이 광물 탄산화를 통해 탄산염 광물인 CaCO₃를 생성하는 산화물로써 이는 Al₂O₃가 함유된 산업부산물을 원료로 사용하는 경우 이산화탄소 반응경화 시멘트의 광물로써 활용이 가능할 것으로 기대한다.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2369-2377
• /
• 2012

The gas-phase dehydration of glycerol to acrolein was carried out over silicotungstic acid ($H_4SiW_{12}O_{40}{\cdot}xH_2O$, HSiW) catalysts supported on $SiO_2$, ${\eta}-Al_2O_3$, and silica-aluminas with different Al contents. The HSiW catalysts supported on silica-aluminas showed higher glycerol conversions and acrolein yields during the initial 2 h at $315^{\circ}C$ than did $SiO_2$- and ${\eta}-Al_2O_3$-supported HSiW catalysts. Among the tested catalysts, HSiW/$Si_{0.9}Al_{0.1}O_x$ exhibited the highest space-time yield during the initial 2 h. The loaded HSiW species can change the acid types and suppress the formation of carbonaceous species on Al-rich silica-aluminas. The deactivated HSiW supported on silica-aluminas can be fully regenerated after calcination in air at $500^{\circ}C$. As long as the molar ratio between water and glycerol was in the range of 2-11, the acrolein selectivity increased significantly with increasing water content in the feed, while the surface carbon content decreased owing to the suppression of heavy compounds.

• 한국세라믹학회지
• /
• 제43권4호
• /
• pp.235-241
• /
• 2006

Mullite short fibers have been fabricated by adapting the Kneading-Drying-Calcination (KDC) process and characterized. The effect of the addition of foaming agent and calcination temperature on the formation of mullite fibers from coal fly ash, was examined. In the present work, ammonium alum $NH_4Al(SO_4)_2\;12H_2O$ synthesized trom coal fly ash and sodium phosphate $Na_2HPO_4\;2H_2O$ were used as foaming agents. After calcination at $1300^{\circ}C$ for 10 h and then etching with 20% HF solution at $50^{\circ}C$ for 5 h using a microwave heating source, the alumina-deficient $(AI_2O_3/SiO_2$ = 1.13, molar ratio) orthorhombic mullite fibers with a width of ${\sim}0.8mm$ (aspect ratio >30), were prepared from the coal fly ash with $AI_2O_3/SiO_2$ = 0.32, molar ratio by the addition of $NH_4AI(SO_4)_2\;12H_2O$, and with further addition of 2 wt% sodium phosphate. The excessive addition of sodium phosphate rather decreased the formation of mullite fibers, possibly due to the large amount of liquid phase prior to mullitization reaction.

• 한국세라믹학회지
• /
• 제21권1호
• /
• pp.11-18
• /
• 1984

$eta$-Sialon synthesis was investigated via the simultaneous reduction and nitridation of Hadong Pink Kaolin using the graphite as a reducing agent at 135$0^{\circ}C$ under 80% $N_2-20%H_2$ atmosphere. When Hadong Pink Kaolin-graphite-silicon nitride seed(molar ratio ; $SiO_2:C:Si_3N_4$=1;3.5:0.05) mixture was heated at 135$0^{\circ}C$ for as long as 20h in 80%$N_2-20%H_2$ atmosphere a homogeneous $eta$-Sialon$(Si_{3.5}Al_{2.5}O_{2.5}N_{2.5})$ was mainly formed together with a small amount of $\alpha$-$Si_3N_4$.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.491-499
• /
• 1997

High flexible lightweight composites containing tobermorite as a main mineral is produced using various amorphous silicates, lime, cement and fibers. Here, Mechanical properties of the composites were studied by observing microstructures of hydrates and fibers. Amorphous silicates having better hydraulicity retarded the crystallization of tobermorite due to better formation of C-S-H gel in water bath curing, but, difficult conversion from C-S-H gel to tobermorite in hydrothermal reaction. In the low molar ratio of CaO/SiO2 (0.67), faster crystalization was observed dued to more impurities such as Al2O3 alkali, resulting in improving mechanical properties due to small crystal size and many contact points. It was identified that a lot of calcium silicate hydates formed at surface of pulps increase bonding strength and the crack-resistance of matrix in the composites, but decrease hardness and compressive strength. The choice of amorpous silicates having better hydraulicity, low CaO/SiO2 adding each fibers bellow about 5% in the raw mixs and lower molding pressure should be needed at improve mechanical properties of composites.