• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.78-79
• /
• 2009

본 연구에서는 ZnO계 투명전극 소재를 이용하여 RFID 태그 안테나에 적용 가능성 여부를 확인하였다. Si 기판위에 RF 스퍼터링 공정에 의해 Ga-doped ZnO 투명 마이크로스트립 스파이혈 안테나를 $2{\mu}m$를 증착하여 구현하고 그 전기적 특성을 측정하였다. HFSS 전자계 시뮬레이터를 사용하여 13.56MHz HF 주파수 대역에서 태그 안테나로서의 가능성을 검증한 후 Ga-doped ZnO 타겟을 사용한 RF 스퍼터링 공정에 의하여 스파이럴 안테나 패턴을 구현하였다. 마이크로스트립 선폭 및 선 간격을 $50\sim200{\mu}m$때 영역에서 조절하면서 안테나 패턴을 설계하였다. S 파라메터, 자기공진주파수 및 Q값을 시뮬레이션으로부터 도출하였다. Al $2{\mu}m$ 증착한 시편에 비하여 약 -10dB 정도의 이득저하가 발생하였으나 리더-태그를 밀착시킨 조건에서 1.7V (13.56MHz) 전압검출이 가능하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.11-11
• /
• 2008

ZnO has a very large exciton binding energy (60 meV) as well as thermal and chemical stability, which are expected to allow efficient excitonic emission, even at room temperature. ZnO based electronic devices have attracted increasing interest as the backplanes for applications in the next-generation displays, such as active-matrix liquid crystal displays (AMLCDs) and active-matrix organic light emitting diodes (AMOLEDs), and in solid state lighting systems as a substitution for GaN based light emitting diodes (LEDs). Most of these electronic devices employ the electrical behavior of n-type semiconducting active oxides due to the difficulty in obtaining a p-type film with long-term stability and high performance. p-type ZnO films can be produced by substituting group V elements (N, P, and As) for the O sites or group I elements (Li, Na, and K) for Zn sites. However, the achievement of p-type ZnO is a difficult task due to self-compensation induced from intrinsic donor defects, such as O vacancies (Vo) and Zn interstitials ($Zn_i$), or an unintentional extrinsic donor such as H. Phosphorus (P) doped ZnO thin films were grown on c-sapphire substrates by radio frequency magnetron sputtering with various Ar/ $O_2$ gas ratios. Control of the electrical types in the P-doped ZnO films was achieved by varying the gas ratio with out post-annealing. The P-doped ZnO films grown at a Ar/ $O_2$ ratio of 3/1 showed p-type conductivity with a hole concentration and hole mobility of $10^{-17}cm^{-3}$ and $2.5cm^2/V{\cdot}s$, respectively. X-ray diffraction showed that the ZnO (0002) peak shifted to lower angle due to the positioning of $p^{3-}$ ions with a smaller ionic radius in the $O^{2-}$ sites. This indicates that a p-type mechanism was due to the substitutional Po. The low-temperature photoluminescence of the p-type ZnO films showed p-type related neutral acceptor-bound exciton emission. The p-ZnO/n-Si heterojunction LEO showed typical rectification behavior, which confirmed the p-type characteristics of the ZnO films in the as-deposited status, despite the deep-level related electroluminescence emission.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1101-1106
• /
• 1998

Various $Zn_{2-x}SiO_4$:xMn based green phosphors were investigated in association with a co-dopant. The co-dopant incorporated into the phosphors are believed to alter the internal energy state of $Zn_{2-x}SiO_4$ : xMn So that the improvement in their intensity could be expected. Phosphor samples were prepared using the solid state reaction therein raw powders are mixed in the acetone and successively fired at $1300^{\circ}C$ for 4 hour. The fired powders are also heated up to $900^{\circ}C$ for 2 hour in the reduced atmoshpere and thereby giving The fired powders are also heated up to $900^{\circ}C$ for 2 hour in the reduced atmosphere and thereby giving rise to conspicuous enhancement of radiative efficiency. Basically the 0.08 mole ratio of the Mn con-centrations has the maximum value of the intensity so that a co-dopant are added to this Mn con-centration. When the Mg is co-doped with Mn luminescent intensity is proven to be promoted significantly.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.139.2-139.2
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1437-1439
• /
• 2009

Electrical and optical properties of $SiO_2$-doped ZnO (SZO) films on the corning 7059 glass substrates by using rfmagnetron sputtering method are investigated. The deposition rate becomes maximum near 3 wt.% and gradually decreases when the $SiO_2$ content further increases. The growth rates at 3 wt.% is $4^{\circ}$A/s. We found that the average transmittance of all films is over 80% in the wavelength range above 500 nm. The optical band gap decreases from 3.52 to 3.33 eV with an increase in thickness. X-ray diffraction patterns show that the film with a relatively low $SiO_2$ content (< 4 wt.%) is amorphous. SZO films at the $SiO_2$ contents of 2 wt.% shows the resistivity of about $3.8{\times}10^{-3}{\cdot}cm$. The sheet resistance decreases with increasing the heat treatment temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.392-392
• /
• 2011

현재의 태양전지에 사용되는 wafer는 원가저감을 위해 점점 얇아지고 있는 추세이다. 하지만 wafer가 얇아질수록 장파장 영역의 광자는 충분히 활용할 수 없게 된다. 대부분의 광자는 50um 지점에 도달하였을 때 그 역할을 다하고 소멸하게 되며, 특히 800nm 이상의 장파장에 대한 generation rate는 wafer 두께에 따라 급격한 차이를 보이게 된다. 따라서 장파장 영역의 광자를 효율적으로 사용할 뿐만 아니라 원가 저감을 위해 더욱 얇아지고 있는 추세의 wafer의 장파장 이용을 보상하기 위해서 TCO를 이용한 back-reflector의 역할은 가장 좋은 해결책이 될 것이다. 본 연구에서는 Macleod를 이용하여 ZnO, Al-doped ZnO, TiN, TiO2와 같은 다양한 TCO 물질에 대한 다양한 simulation을 실시 하여 reflectance 특성을 알아보았다. 상기 simulation결과로써 Al-doped ZnO가 가장 reflectance 특성이 좋게 나타났었으며 이를 이종접합 태양전지에 적용하여 광학적 및 전기적 특성 변화에 대해서 분석하였다.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.35-58
• /
• 2000

The demand for sub-micrometer or nanometer functional ceramic powders with a better suspension behavior in aqueous media in increasing. Redispersible barium titanate (BT) nanocrystals, green light emitting Mn2+ doped Zn$_2$SiO$_4$ and ZnS nanoparticle phosphors were synthesized by a hydrothermal method or chemical precipitation with surface modification. The nanoparticle redispersibility for BT was achieved by using a polymeric surfactant. X-ray diffraction(XRD) results indicated that the BT particles are of cubic phase with 80 nm in size. XRD results of zinc silicate phosphor indicate that seeds play an important role in enhancing the nucleation and crystallization of Zn$_2$SiO$_4$ crystals in a hydrothermal condition. This paper describes and discuss the methods of surface modification, and the resulting related properties for BT, zinc silicate and zinc sulfide.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.355-356
• /
• 2008

In this work, ZnO films doped with different contents of Indium (0.1at.%, 0.3at.%, 0.6at.%, respectively) were deposited on Si (111) substrate that has 1~20 $\Omega$cm by pulsed laser deposition (PLD) at $600^{\circ}C$ for 30min. The thickness of the films are about 250 nm. The structural, optical and electrical properties of the films were investigated using X-ray Diffraction (XRD), Atomic force microscope (AFM), Photoluminescence (PL) and Hall measurement. It has been found that RMS of the films is decreased and grain size is increased with increasing the contents of doped Indium. The results of the Photoluminescence properties were indicated that the films have UV emission about 380nm and shows a little red shitf with increasing contents of doped indium. The result of the Hall measurement shows that the concentration and resisitivity in doped ZnO are as changing as one order, respectively ${\sim}10^{18}/cm^2$, ${\sim}10^{-2}cm{\Omega}cm$.

• 공업화학
• /
• 제20권6호
• /
• pp.617-621
• /
• 2009

Zinc oxide (ZnO)을 금(Au)과 fluorine-doped tin oxide (FTO) 촉매로 산화실리콘($SiO_2$) 기판에 산화아연입자 20 nm, $20{\mu}m$를 각각 사용하여 기체-액체-고체(VLS) 합성법으로 성장시켰다. 나노로드의 표면특성, 화학조성, 그리고 결정특성을 엑스레이회절(X-ray diffraction (XRD)), 에너지 분산형 X선 분광기(Energy-dispersive X-ray spectroscopy (EDX)), 표면 방출주사현미경(Field-emission scanning electron microscope (FE-SEM))으로 분석하였다. ZnO의 입자 크기 뿐만 아니라 결정형태가 성장에 크게 영향을 미쳤다. ZnO의 모든 나노구조가 6방정계(六方晶系), 단일결정구조를 가지고 있었다. 최적온도는 $1030^{\circ}C$, 입자크기는 20 nm이다. 그러므로 Au 대신 플루오린 첨가 도핑으로 전기음성도가 증가된 FTO 증착에 의해서 생성된 나노로드는 경제성 있는 대체물질로서의 가치가 있을 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1277-1279
• /
• 1994

In the structure of ZnO/nip-SiC: H/metal substrate amorphous silicon (a-Si:H) solar cells, the effects of inserting a rear textured ZnO in the p-SiC:H/metal interface and a graded bandgap buffer layer in the i/p-SiC:H have been analysed by computer simulation. The incident light was taken to have an intensity of $100mW/cm^2$(AM-1). The thickness of the a-Si:H n, ${\delta}$-doped a-SiC:H p, and buffer layers was assumed to be $200{\AA},\;66{\AA}$, and $80{\AA}$, respectively. The scattering coefficients of the front and back ZnO were taken to be 0.2 and 0.7, respectively. Inserting the rear buffer layer significantly increases the open circuit voltage($V_{oc}$) due to reduction of the i/p interface recombination rate. The use of textured ZnO markedly improves collection efficiency in the long wavelengths( above ${\sim}550nm$ ) by back scattering and light confinement effects, resulting in dramatic enhancement of the short circuit current density($J_{sc}$). By using the rear buffer and textured ZnO, the i-layer thickness of the ceil for obtaining the maximum efficiency becomes thinner(${\sim}2500{\AA}$). From these results, it is concluded that the use of textured ZnO and buffer layer at the backside of the ceil is very effective for enhancing the conversion efficiency and reducing the degradation of a-Si:H pin-type solar cells.