• 산업기술연구
• /
• 제16권
• /
• pp.157-168
• /
• 1996

The deposition characteristics of ultrafine $SiO_2$ particles were investigated in a tube furnace reactor theoretically and experimentally controlling tube wall temperature in deposition zone. The model equations such as mass and energy balance equations and aerosol dynamic equations inside reactor and deposition tube were solved to predict the particle growth and deposition. The particle size and deposition efficiencies of $SiO_2$ particles were calculated, changing the process conditions such as tube furnace setting temperature, total gas flow rate inlet $SiCl_4$ concentration and were compared with the experimental results.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.752-756
• /
• 2002

PDP(Plasma Display Panel)용 녹색 형광체인 $Zn_2SiO_4:Mn$ 형광체의 제조에 있어 콜로이드 분무 열분해법을 도입하고, $Zn_2SiO_4$ wellimite 결정의 $Si^{4+}$ 자리를 치환하는 $Gd^{3+}/Li^+$ 부활성제를 첨가하여 형광체의 발광특성을 향상시키고자 하였다. 14 nm 크기의 fumed silica 입자를 규소 전구체로 도입한 콜로이드 분무열분해법에 의해서 제조되어진 $Zn_2SiO_4:Mn$ 입자는 응집이 없는 구형의 형상, 작은 입자 크기 및 좁은 입도 분포를 가졌다. $Gd^{3+}/Li^+$ 함량은 $Zn_2SiO_4:Mn$ 형광체 입자의 발광특성에 영향을 끼쳤으며, 적정한 함량의 $Gd^{3+}/Li^+$ 부활성제를 첨가함으로써 진공 자외선하에서 형광체의 발광휘도를 향상시키고, 잔광시간을 크게 줄일 수 있었다. 분무 열분해법에 의한 $Gd^{3+}/Li^+$이 코도핑된 $Zn_2SiO_4:Mn$ 형광체 입자의 제조에 있어서 후열처리 온도는 형광체의 발광특성을 결정짓는 주요한 인자이다. 0.1 mol%의 $Gd^{3+}/Li^+$ 부활제를 포함하고 $1,145^{\circ}C$ 온도에서 소결된 $Zn_2SiO_4:Mn$ 형광체 입자는 상업용 형광체에 비해 5% 높은 발광 휘도과 5.7 ms의 잔광시간을 가졌다.

• 한국해양공학회지
• /
• 제22권4호
• /
• pp.59-64
• /
• 2008

The mechanical properties of liquid phase sintered (LPS) SiC materials, with the addition of oxide powder, were investigated, in conjunction with a detailed analysis of their microstructures. LPS-SiC materials were fabricated at a temperature of 1820 $^{\circ}C$ under an argon atmosphere, using three different starting sizes of SiC particles. The sintering additive for the fabrication of the LPS-SiC materials was an $Al_2O_3-Y_2O_3$ mixture with a constant composition ratio ($Al_2O_3/Y_2O_3$: 1.5). The particle sizes of the commercial SiC powderswere 30 nm, 0.3 $\mu$m, and 3.0 $\mu$m. The flexural strength of the LPS-SiC materials was also examined at elevated temperatures. A decrease in the starting size of the SiC particles led to an increase in the flexural strength of the LPS-SiC materials, accompanying a highly dense morphology with the creation of a secondary phase. Such a secondary phase was identified as $Y_3Al_2(AlO_4)2$. The flexural strength of the LPS-SiC materials greatly decreased with an increase in the test temperature, due to the creation of a large amount of pores.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.454-457
• /
• 2011

We report the preparation of nanocrystalline cobalt ferrite, $CoFe_2O_4$, particles using recycled $Co_3O_4$ and their surface coating with silica using micro emulsion method. Firstly, the $Co_3O_4$ powders were separated from waste cemented carbide with acid-base chemical treatment. The cobalt ferrite nanoparticles with the size 10 nm are prepared by thermal decomposition method using recycled $Co_3O_4$. $SiO_2$ was coated onto the $CoFe_2O_4$ particles by the micro-emulsion method. The $SiO_2$-coated $CoFe_2O_4$ particles were studied their physical properties and characterized by X-ray diffraction (XRD), high resolution-transmission electron microscopy (TEM) analysis and CIE Lab value.

• 한국재료학회지
• /
• 제12권8호
• /
• pp.650-655
• /
• 2002

$SiO_2$ gels containing dispersed fine Te metal particles have been prepared by the sol- gel method using a starting solution containing Tetraethoxy Silane (Si($OC_2$ $H_{5}$ )$_4$), $H_2$O, Ethylalchol ($C_2$$H_{5}$OH), Nitric Acid ($HNO_3$) and Tellurium Tetracholoride ($TeCl_4$) in a several molar ratio. Gelling time of sols was about 3 days and viscosity of solution was very low about 2~3 cP for 3 days. Heat-treatments of the gel have been performed at 500, 700, 900, 1100 and $1300^{\circ}C$ for 1 hour, respectively. We have investigated TG-DTA, X-ray diffraction patterns and SEM of heat-treatmented gels. The size of Te fine particles dispersed in $SiO_2$ gel was about 0.8~1 $\mu\textrm{m}$ and the shape was almost quadrangle.

• 한국결정성장학회지
• /
• 제19권6호
• /
• pp.277-281
• /
• 2009

초발수 $SiO_2$ 박막을 sol-gel법에 의해 유리 기판 위에 성공적으로 제조하였다. 높은 표면 조도를 갖는 $SiO_2$ 박막을 제조하기 위하여 tetraethoxysilane(TEOS) 용액에 $SiO_2$ 나노 입자들을 첨가하였다. $iO_2$ 입자를 첨가하지 않은 용액을 이용하여 제조한 코팅막은 RMS roughness가 1.27 nm의 매우 평평한 표면 구조를 나타낸 반면, $SiO_2$ 나노 입자들을 1.0, 2.0, 3.0 wt% 첨가한 용액을 이용하여 제조한 $SiO_2$ 박막의 RMS roughness는 44.10 nm, 69.58 nm, 80.66 nm로 측정되었다. 제조된 $SiO_2$ 박막의 표면을 소수성 표면으로 바꾸기 위하여 FAS 용액을 이용하여 발수 처리를 하였다. FAS 처리 이후 거친 표면구조를 갖는 $SiO_2$ 박막의 표면은 친수성에서 소수성으로 바뀌었고 특히, 80.66 nm의 RMS roughness를 갖는 박막은 $163^{\circ}$의 물 접촉각을 갖는 초발수 표면을 나타내었다.

• Corrosion Science and Technology
• /
• 제9권2호
• /
• pp.81-86
• /
• 2010

The mechanisms of selective oxidation of intercritically annealed CMnAl TRIP steels in a Continuous Galvanizing Line (GCL) were studied by cross-sectional observation of the surface and sub-surface regions by means of High Resolution Transmission Electron Microscopy (HR-TEM). The selective oxidation and nitriding of an intercritically annealed CMnAl TRIP steel in a controlled dew point 10%$H_2+N_2$ atmosphere resulted in the formation of c-xMnO.$MnO_2$ (1${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) particles on the steel surface. Single crystal c-xMnO.$SiO_2$ ($2{\leq}x{\leq}4$) oxide particles were also observed on the surface. A thin film of crystalline c-xMnO.$SiO_2$ (2${\leq}$x<3) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) was present between these particles. In the sub-surface region, internal oxidation, nitriding and intermetallic compound formation were observed. In the first region, large crystalline c-xMnO.$SiO_2$ ($1{\geq}x{\geq}2$) and c-xMnO.$Al_2O_3$ ($x{\geq}1$) oxides particles were present. In the second region, c-AlN particles were observed, and in a third region, small $MnAl_x$ (x>1) intermetallic compound particles were observed.

• 한국재료학회지
• /
• 제26권4호
• /
• pp.182-186
• /
• 2016

Zircon, having excellent thermal, chemical, and mechanical properties, is utilized in refractory materials, electronic materials, chemical machines, structural materials, etc. However, zircon generally shows thermal dissociation to zirconia($ZrO_2$) and silica($SiO_2$) around the sintering temperature of $1540^{\circ}C$, and when zircon particles are small and impurities are present, thermal dissociation is known to occur at around $1100^{\circ}C$. This reduces the mechanical properties of $ZrSiO_4$. In this research, the effect of adding $SiO_2$ and 3Y-TZP to $ZrSiO_4$ has been studied in order to suppress dissociation and improve the mechanical properties. Addition of $SiO_2$ suppressed the dissociation of $ZrSiO_4$ at lower temperatures. It also enabled optimum packing between the particles, resulting in a dense microstructure and good mechanical properties. When 3Y-TZP was added, recombination with the dissociated $SiO_2$ resulted in good mechanical properties by suppressing the generation of pores and the densification of the microstructure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.120-121
• /
• 2007

Nano-floating gate memory (NFGM) devices were fabricated by using the low temperature poly-Si thin films crystallized by ELA and the $In_2O_3$ nano-particles embedded in polyimide layers as charge storage. Memory effect due to the charging effects of $In_2O_3$ nano-particles in polyimide layer was observed from the TFT NFGM. The post-annealing in 3% diluted hydrogen $(H_2/N_2)$ ambient improved the retention characteristics of $In_2O_3$ nano-particles embedded poly-Si TFT NFGM by reducing the interfacial states as well as grain boundary trapping states.

• Bulletin of the Korean Chemical Society
• /
• 제21권12호
• /
• pp.1193-1198
• /
• 2000

The preparation of nanocrystalline hematite, ${\alpha}-Fe_2O_3$, paricles and their surface coating with silica layers are described. The hematite particles with the size of 30~60 nm are firstly prepared by thermal decomposition of trinuclear acetate-hydroxo iron (III) nitrate complex, $[Fe_3$(OCOCH_3)_7$OH${\cdot}$2H_2O]NO_3$, at $400^{\circ}C$. Subsequently the hematite surfaces are coated with siliva layers by a controlled hydrolysis and condensation reaction of TEOS with varying the TEOS concentration and pH. Monodispersed and spherical $SiO_2-coatedFe_2O_3$ particles with the average particle diameter of ~90 nm and extremely narrow size distribution can be obtained at the pH of 11 and the TEOS concentration of 0.68M, which are found to be the optimum conditions in the present study in achieving the homogeneous deposition of silica layers on hematite surfaces. Diffuse reflectance UV-Vis spectra reveal that the characteristic optical reflectance of ${\alpha}-Fe_2O_3$ particles is preserved almost constant even after coating the surfaces, suggesting that the $SiO_2$ layers can be regarded as protecting layers without degrading the optical properties of hematite particles.