• Food Science of Animal Resources
• /
• v.30 no.4
• /
• pp.617-625
• /
• 2010

The objective of this study was to determine the effect of reheating methods on the color characteristics of precooked pork patties with various NaCl and phosphate levels. NaCl/phosphate levels for each formulation were as follows; N1 (1% NaCl), N1+P (1% NaCl+0.3% phosphate), N2 (2% NaCl), and N2+P (2% NaCl+0.3% phosphate). The reheating methods used were by electric grill and microwave oven. The surface color of the patties reheated by microwave showed more brown and less-intense red, and the phosphate-treated patties reheated by microwave were more reddish and less brownish. With increased amounts of added NaCl and phosphate, the internal color of patties was more reddish, and the phosphate-treated patties reheated by microwave had more brown than those reheated by electric grill. Among all of the treatments, there were no significant differences in surface color, internal color, and overall appearance. Thus, the color changes in reheated patties were influenced by reheating methods and phosphate.

• Journal of the Korean Ceramic Society
• /
• v.32 no.4
• /
• pp.419-428
• /
• 1995

Polycrystalline silicon carbide (SiC) thick films were depostied by low pressure chemical vapor deposition (LPCVD) using CH3SiCl3 (MTS) and H2 gaseous mixture onto isotropic graphite substrate. Effects of deposition variables on the SiC film were investigated. Deposition rate had been found to be surface-reaction controlled below reactor temperature of 120$0^{\circ}C$ and mass-transport controlled over 125$0^{\circ}C$. Apparent activation energy value decreased below 120$0^{\circ}C$ and deposition rate decreased above 125$0^{\circ}C$ by depletion effect of the reactant gas in the direction of flow in a horizontal hot wall reactor. Microstructure of the as-deposited SiC films was strongly influenced by deposition temperature and position. Microstructural change occurred greater in the mass transport controlled region than surface reaction controlled region. The as-deposited SiC layers in this experiment showed stoichiometric composition and there were no polytype except for $\beta$-SiC. The preferred orientation plane of the polycrystalline SiC layers was (220) plane at a high reactant gas concentration in the mass transfer controlled region. As depletion effect of reactant concentration was increased, SiC films preferentially grow as (111) plane.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.169.1-169.1
• /
• 2013

산업 및 기술의 발전에 의해 많은 신소재들이 개발되고 있다. 그 중에서 SiC는 고온재료, LED, 반도체 등의 우주선 표면재료, 핵융합로 구조재료, 고온 씰, 히터 등 여러 산업분야에서 관심을 가지면서 다양한 가스를 이용한 합성법이 개발되어 있다. 최근에는 분말의 형태 및 크기를 용도에 맞게 개발해서 사용하고 있는 상황이다. 그런데 각 합성법에 따른 합성원리에 대해서는 여러 가지 주장이 있다. 그 중에서 몇 가지 합성법에 대해서 고찰하고 합성의 원리를 추론한다. 그리고 그 중의 한 가지인 CH3SiCl3 가스를 이용한 SiC 나노분말 합성과 SiC의 결정성장 과정에서 나타나는 whisker의 형성을 확인했다. 정교한 SiC 분말합성은 일반적으로 sol-gel, 플라즈마(DC, AC 및 ICP 등) 등을 이용한 방법이 개발되어 있다. 이와 같이 정교한 SiC 나노분말 등은 실리콘 유기 화합물 중합체(trichloromethylsilane, polycarbosilane 등)의 열분해를 통해 합성 할 수 있으며, 열분해 는 약 1,000{\sim}1,500^{\circ}C의 온도 영역에서 일어난다. 이 과정에서 고분자의 열분해 및 재결합 이 동반되고 부산물로서 HCl, CH4 등의 유해가스를 같이 생성한다. 합성된 SiC 나노분말은 전형적인 ${\beta}-SiC$로 XRD의 관찰결과 (111), (220), (311)의 방향성을 갖는 것을 확인했으며 평균입자의 크기는 약 30 nm 정도다.

• Journal of Surface Science and Engineering
• /
• v.47 no.6
• /
• pp.354-361
• /
• 2014

In order to utilize silicon carbide (SiC) as an inner part of fluidized bed reactor (FBR) for manufacturing poly-silicon, we have carried out the thermodynamic calculation on the overall reactions including poly-silicon synthesis and compatibility of SiC with FBR process. The resources of silicon included $SiH_4(MS)$, $SiHCl_3(TCS)$ and $SiCl_4(STC)$ and the thermodynamic yield of the FBR with MS, TCS and STC were compared each other with variable range of temperature, pressure and hydrogen to silicon ratio. The silicon yield of MS, TCS and STC were 100%, 28% and 4%, respectively, throughout the conventional FBR conditions. Silicon carbide having high hardness and strength showed strong resistance to granule collisions during the FBR process using a lab-scale reactor. And it also showed quite good compatibility with the typical FBR processes of MS and TCS resources.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.740-746
• /
• 2011

Thermally activated batteries have good stability, reliability and long shelf life. Due to these characteristics and operational mechanism, thermal batteries are usually applied to military power sources. Especially, Li/$FeS_2$ thermal batteries, which are used mostly in these days, use LiCl-KCl and LiBr-LiCl-LiF as electrolytes. The electrochemistry of thermal batteries have been researched for long time, however, electrochemical study using impedance spectroscopy was not published so much. Through this research, microscopic electrochemical research was investigated with electrochemical impedance spectroscopy(E.I.S). Electrolyte effects on Li/$FeS_2$ thermal battery was researched changing electrolytes, LiCl-KCl and LiBr-LiCl-LiF. Additionally, the salts, which are added to electrolytes, effects on thermal battery were researched. It is expected that the impedance spectroscopy analysis is applicable to not only thermal battery electrochemical study effectively, but also, thermal battery developments.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.4
• /
• pp.276-279
• /
• 2011

This work, the etching characteristics of $Ba_2Ti_9O_{20}$(BTO) thin films were investigated using an inductively coupled plasma (ICP) of $Ar/Cl_2$ gas mixture. The etch rate of BTO thin films as well as the $BTO/SiO_2$ and BTO/PR etch selectivity were measured as functions of $Ar/Cl_2$ mixing ratio (0~100% Ar) at a constants gas pressure (6 mTorr), total gas flow rate (50 sccm), input power (700 W) and bias power (200 W). The etch rate of BTO thin films decreased with increasing Ar fraction. To analyze the etching mechanism an optical emission spectroscopy (OES), double Langmuir probe(DLP) and surface analysis using X-ray photoelectron spectroscopy (XPS) were carried out.

• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.650-655
• /
• 2002

$SiO_2$ gels containing dispersed fine Te metal particles have been prepared by the sol- gel method using a starting solution containing Tetraethoxy Silane (Si($OC_2$ $H_{5}$ )$_4$), $H_2$O, Ethylalchol ($C_2$$H_{5}$OH), Nitric Acid ($HNO_3$) and Tellurium Tetracholoride ($TeCl_4$) in a several molar ratio. Gelling time of sols was about 3 days and viscosity of solution was very low about 2~3 cP for 3 days. Heat-treatments of the gel have been performed at 500, 700, 900, 1100 and $1300^{\circ}C$ for 1 hour, respectively. We have investigated TG-DTA, X-ray diffraction patterns and SEM of heat-treatmented gels. The size of Te fine particles dispersed in $SiO_2$ gel was about 0.8~1 $\mu\textrm{m}$ and the shape was almost quadrangle.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.410-413
• /
• 2007

The effect of internal donor(ID) in the heterogeneous Ziegler-Natta catalyst on the ethylene-1-butene copolymerization and the molecular structure of the resulting copolymer was investigated. $SiO_2$-supported $TiCl_4$ catalysts having ID/Ti molar ratio of 0.5 were prepared with ethyaluminium dichloride, magnesium alkyl, 2-ethyl-1-hexanol and $TiCl_4$. Three different IDs were employed such as ethylbenzoate(EB), diisobuylphthalate(DIBP) and dioctylphthalate(DOP). ID-added catalyst showed a larger fraction of Ti(+3) compared to that of no ID-added catalyst. The EB-added catalyst showed the highest activity in copolymerization. Xylene soluble value decreased by more than 50 % with ID-added catalysts compared to that of no ID-added catalyst. Crystaf analysis showed the chemical compositional distribution of PE copolymer was improved in the case of DIBP-added catalyst significantly. It could be explained that the presence of ID could make more even active sites and block the non-stereospecific active sites.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.461-472
• /
• 1997

This study was carried out to investigate the characteristics of chemical components and precipitation at Kimhae area from March, 1992 to June, 1994. The pH values, concentration of soluble ions($Cl^-$, $NO_2^-}$ $NO_3^-}$, $NO_4^{2-}$-, $PO_4^{3-}$. $F^-$, $Mg^{2+}$, $Ca^{2+}$, $Mn^{2+}$, $K^+) and non-soluble metals(Cr.Si. Zn, Pb, Cu, Fe, Mn, Mg, Ad. V. Cal were measured by pH meter, IC (ion Chromatography) and ICP(Inductively Coupled Plasma). The data were analyzed by the dally. hourly distribution characteristics of acidity and chemical components, as well as the correlation between them. The results are as follows. 1. The pH range of precipitation was from 3.45 to 6.80 in Kimhae area. and average value was pH 4.62 and main chemical components were $SO_4^{2-}$, $Cl^-$, $NO_3^-$. The highest pH value and concentration appeared in initial rain, which might result from urbanlzation and industrialization in this area and long term transportation from China. 2. The hourly correction distribution of main anions related to pH value In the rainwater showed $SO_4^{2-}$ > $NO_3^-$ > $Cl^-$. Hourly concentration of heavy metal and each ion was highly correlated with pH in the precipitation.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.613-617
• /
• 2010

Ferro-Nickel slag is one of the by-products in Ferro-Nickel manufacturing process. The slag is composed of $SiO_2$, MgO, $Fe_2O_3$ and others. But the slag has been buried at landfill despite having valuable elements. This study tried to extract Mg ion and fabricate Mg compound from ferro-nickel slag using hydrochloric acid solution. Mg ion was extracted with Si, Fe and other ions in HCl solution. So reprocess was needed for gaining high purity Mg ion. It was thought that Si ion or $SiO_2$ precipitated in HCl solution and removed from solution in filtering process. Fe ion converted into $Fe(OH)_3$ after reacted with $NH_4OH$ and precipitated in HCl solution. After these process, the filtrate was composed of high purity Mg ion. $MgCl_2{\cdot}NH_4Cl{\cdot}6H_2O$ was obtained through drying of filtrate and this product was changed into MgO by burning process ($600^{\circ}C$-30 min). That is, 1st material or solution for manufacturing 2nd product was fabricated using acid dissolution method and other treatments.