• 한국토양비료학회지
• /
• 제25권1호
• /
• pp.44-51
• /
• 1992

유기물(有機物)의 시용(施用)이 고추역병의 발생에 미치는 영향을 조사하기 위하여 폿트시험을 수행하여 다음과 같은 결과를 얻었다. 1. 고추역병의 억지에 대한 유기물시용의 효과는 기온이 높은 여름보다는 가을시용이 효과적이었다. 또, 유기물의 종류별(種類別)로는 퇴비류(堆肥類)보다는 신선유기물(新鮮有機物)인 볏짚의 시용효과가 컸다. 2. 토양미생물상(土壤微生物相)에 대한 유기물시용(有機物施用)의 영향(影響)은 특히 볏짚시용에서 가장 커서 사상균(絲狀菌) 및 세균수(細菌數)의 증가가 현저하였다. 3. 가을 1작기(作期)의 토양의 고추 역병균(疫病菌) 조사결과 유기물 무시용구 및 퇴비류 시용구에서는 고추재배 초기에는 역병균을 분리할 수 없었으나 시기가 경과함에 따라서 역병균이 검출되었다. 볏짚 시용구에서는 재배 초기에는 역병균이 검출되었으나 재배중기 이후에는 검출되지 않았다. 이러한 현상은 볏짚과 퇴비류가 토양중 역병균의 생존에 미치는 영향이 다른데에 기인하는 것으로 생각되었다. 4. 각 처리구의 사상균을 분리 동정한 결과 시용한 유기물의 종류에 따라 현저한 차이가 인정되었다. 5. 볏짚시용구의 전사상균수(全絲狀菌數)에 대한 길항사상균수(拮抗絲狀菌數)의 비율은 다른 처리구에 비하여 매우 높은 것으로 나타났다.

• 기본간호학회지
• /
• 제6권3호
• /
• pp.522-531
• /
• 1999

This research identifies the ingress to egress primary factors that causes a patient to receive delayed emergency medical care. This material was collected between February 1st to 28th, 1998. Research envolved 4,118 people who visited the college emergency medical center in Kyeongido Province, South Korea. Medical records were examined, using the retrospective method. to determine the length of stay and the main cause for waiting. Results are as follows : 1. The age group with the highest admission rate was 10 and under, approximately 1,394 (33.9%). Followed by an even distribution for ages between 11-50 at 10-15% for their respective ranges. The lowest admission rate was 50 years and above. 2. From the 4,118 records examined, 3,489 received outpatient treatment (84.7%); 601 were admitted for inpatient care (14.6%); 25 arrived dead on arrival (0.6%); and 4 people died at the hospital. 3. Between 7PM to 12AM, 42.9% were admitted to the EMC. The hours from 9PM to 11PM recorded the highest admission rate and 5AM to 8AM was the lowest From 8PM to 12AM, the most beds were occupied. 4. For most patients. the average length of stay was approximately 2.2 hours. By medical department, external medicine was the longest for 2.8 hours. Pediatrics was the shortest for 1.6 hours. The average waiting period for inpatient admission was 2.6 hours. Inpatient admission for pediatrics and external medicine was 3.4 hours and 2.2 hours respectively. 5. Theses are primary factors for delay at EMC: 1) pronged medical consultations to decide between inpatient versus outpatient treatment, and delaying to be inpatient, 2) when you call physicians they are delayed to come 3) Understaffing during peak or critical hours, 4) Excessive consulting with different medical departments, 5) some patients require longer monitoring periods, 6) medical records are delayed in transit between departments, 7) repeated laboratory tests make delay the result, 8) overcrowded emergency x-ray place causes delay taking x-ray and portable x-ray, 9) the distance between EMC and registration and cashier offices is too far. 10) hard to control patient's family members. The best way to reduce EMC waiting and staying time is by cooperation between departments, both medical and administrative. Each department must work beyond their job description or duty and help each other to provide the best medical service and satisfy the patient needs. The most important answer to shortened the EMC point from ingress to egress is to see things from a patient point of view and begin from there to find the solution.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.137-163
• /
• 1990

The properties of a investment material can be described by the consistency at the slurry state, the setting time, the compressive strength and the thermal expansion during the casting. In this study the effect of the production parameters which are included the ratio of quartz and cristobalite, the content of binder, the water powder ratio and the content and concentration of additives on the Properties of the gypsum-bonded investments has been investigated with help of the consistency test, the vicat needle test, the compressive strength test, the thermal expansion test, x-ray diffraction and DTA thermal differential test. The experimental results showed that the constitution of a investment with W/P ratio of 0.34, 30% of gypsum, 0.8% aluminium sulfate, 2% magnesium sulfate, 0.6% sodium phosphate was adapted for the properties of the KDA Spec. No. 13 type I investment. The important experimental results are summarized as follows. 1. The consistency of the investment decreased with increasing amount of aluminium sulfate and decreasing amount of sodium phosphate. An addition of magnesium sulfate up to 2% an increase of the consistency was shown. But 3% magnesium sulfate in investment showed a decrease of the consistency. The consistency did not vary significantly with a variation of the content of gypsum and cristobalite and the W/P ratio. 2. Aluminium sulfate and the magnesium sulfate promoted the hardening and the aluminium phosphate delayed the hardening. The setting time increased with amount of gypsum. The effect of the matrix on the setting time was insignificant. With the W/P ratio of 0.34 the setting time was 14 min. 3. The compressive strength decreased with the amount of aluminium sulfate up to 0.25% and increased with the amount of aluminium sulfate greater than 3%. The compressive strength decreased as decreasing the amount of magnesium sulfate and gypsum and as increasing the W/P ratio. The effect of the refractory on the compressive strength was also not significant. With the W/P ratio of 0.34 the compressive strength was $34Kg/mm^2$. 4. The 1st thermal expansion was found at the temperature near and the steady state or the contraction stage was found at the temperature between $250^{\circ}C$ and $500^{\circ}C$. After this stage the 2nd thermal expansion took place at the temperature near $500^{\circ}C$. The amount of thermal expansion increased with decreasing the content of magnesium sulfate, aluminium sulfate and gypsum and the W/P ratio. And the amount of thermal expansion increased as the content of sodium phosphate and cristobalite. With the W/P ratio of 0.34 the amount of total expansion was 1.2%.

• 대한소아치과학회지
• /
• 제36권4호
• /
• pp.556-562
• /
• 2009

이소맹출은 유전적 요인 혹은 여러 가지 국소적 요인에 의해 치아가 비정상적인 위치로 맹출하는 경우를 말한다. 이소맹출이 가장 빈번히 발생하는 치아는 상악 제1대구치로 이를 방치할 경우 인접치의 치근흡수 및 이에 따른 조기탈락으로 영구치 맹출공간 부족을 야기하며, 결과적으로 부정교합을 유발하는 중요한 요인으로 작용한다. 그러나, 치료에 앞서 이소맹출중인 치아가 자발적으로 맹출하기를 기다려볼 것인지 혹은 조기에 치료를 하여 제2유구치의 치근흡수나 탈락을 예방해야 할 것인지에 대한 결정이 선행되어야 한다. 현재 이를 위한 몇몇 진단학적 기준이 제시되고 있으나 학자간 이견이 존재한다. 본 연구에서는 방사선학적 검사를 통해 상악 제1대구치의 이소맹출이 조기 발견된 증례들 중 전방에 위치한 제2유구치의 치근이 흡수되어 비가역적 특징을 보인다고 판단되는 증례에 대해 특별한 처치 없이 주기적인 검진을 통해 자발적으로 해소된 결과를 관찰하였다. 이와 함께 상악 제2유구치 치근흡수의 정도와 상악 제1대구치의 맹출 기울기에 따른 후향적 분석을 통해 상악 제1대구치 이소맹출의 유형을 예측하고자 하였다. 상악 제2유구치의 치근 흡수 정도에 따라 grade I에서 IV로 분류하였고, 파노라마 방사선 사진 상에서 양측 안와의 최하방점을 연결한 수평선과 상악 제1대구치의 근심면을 따라 연결한 수직선을 기준으로 하여 근심각(mesial angle)을 측정하였다. 결과적으로는 상악 제2유구치의 치근 흡수 정도보다 상악 제1대구치의 맹출 기울기가 이소맹출의 유형을 진단하는 데에 있어 더 신뢰할만한 기준이라고 판단할 수 있었다.

• Clinical and Experimental Pediatrics
• /
• 제53권2호
• /
• pp.146-151
• /
• 2010

목 적 : 저자들은 우리나라 초등학교 저학년의 사춘기 발현 시기를 조사하고, 사춘기 발현시기에 영향을 미치는 인자에 대해서 연구하고자 하였다. 방 법 : 고양시 관내 초등학교 1, 2, 3학년 학생들을 무작위로 선별하여 신체검진을 통해 이차성징의 발현유무를 조사하였다. 부모의 동의와 함께 설문조사를 하여 비만도, 식생활 패턴, 생활습관, 성장촉진제품 복용여부 등을 조사하여 사춘기 조기 발현의 영향인자를 통계학적으로 분석하였다. 결 과 : 총 170명의 학생이 선별되었으며 남녀비는 1:1.2였다. 대상 환아들의 연령은 6-9세였으며, 각 연령에서 이차성징을 보인 경우는 남아는 9세에서 2명(25.0%)이었고, 여아에서는 6세는 2명(14.3%), 7세는 6명(19.4%), 8세는 15명(39.6%), 9세는 4명(57.1%)이 이차성징을 보였다. 여아의 예측 평균 사춘기 발현 시기는 $9.11{\pm}1.86$세였다. 사춘기 발현 시기에 영향을 미치는 인자로 통계학적 유의성을 보인 것은 비만도, 패스트푸드 섭취빈도, 성장촉진제품 복용이었다. 비만도가 높을수록 패스트푸드 섭취빈도가 높을수록 사춘기 발현시기가 빨랐다. 성장관련제품을 복용하는 군이 사춘기 발현시기가 빨랐으나 비만도가 높아짐으로 인해 빨라진 것으로 나타났다. 결 론 : 본 연구의 결과 여아의 예측 평균 사춘기 발현 시기가 $9.11{\pm}1.86$세로서 국외의 결과와 유사함을 알 수 있었고, 사춘기 조기 발현에 영향을 미치는 인자는 비만도와 패스트푸드의 섭취 빈도였다.

• 한국산학기술학회논문지
• /
• 제21권4호
• /
• pp.20-25
• /
• 2020

나노과학과 나노기술의 발전에 따라 선택적 패턴 성장을 위한 기술이 주목을 받고 있다. 실리카(Silica) 나노입자는 바이오 라벨링, 바이오 이미징 및 바이오 센싱에 사용되고 있는 유망한 나노소재이다. 본 연구에서는 실리카 나노입자를 수정된 스토버 방법(Stöber Method)인 졸겔(Sol-Gel) 공정으로 합성하였다. 또한 기판의 표면을 미세접촉프린팅 기술로 발수 처리하여 실리카 나노입자를 선택적으로 패턴 성장시켰다. 합성된 실리카 나노입자의 크기와 선택적으로 패턴 성장된 실리카 나노입자의 표면형상을 전계방출 주사전자현미경(Field Emission Scanning Electron Microscopy, FE-SEM)으로 조사하였고, 기판의 표면 기능화에 따른 기판의 접촉각 특성을 조사하였다. 그 결과 OTS 용액으로 발수 처리된 기판에서는 실리카 나노입자를 스핀 코팅하였을 때, 실리카 나노입자를 관찰할 수 없었으나, KOH 용액으로 친수 처리된 기판에서는 실리카 나노입자가 잘 코팅되는 것을 확인하였다. 또한 미세접촉프린팅 기술로 발수 처리한 기판영역 외에서만 실리카 나노입자가 선택적으로 패턴 성장하는 것을 FE-SEM으로 확인하였다. 이러한 실리카 나노입자의 패턴성장 특성을 염료가 도핑 된 실리카 나노입자에 적용한다면, 실리카 나노입자의 패턴 성장 기술은 바이오 이미징 및 바이오 센싱 분야에 유용하게 활용될 것으로 기대된다.

• 대한한방소아과학회지
• /
• 제17권2호
• /
• pp.37-53
• /
• 2003

Objective : To find risk factor and symptoms for transferred newborn from postpartum care center Method : We performed a follow-up study using medical record. Subjects comprised 188 neonates(include 4 twins) and 184 women in childbed who were hospitalized in oriental postpartum care center from January, 1, 2002 to December, 31, 2002. Result: Transferred newborn was total 24, N.V.D. 17, C.S. 7, male and female were 12 separately. The symptom of transfer was fever(16), diarrhea(4), jaundice(3), convulsion(1) Transferred number and rate was male 12(10.7%), female 12(15.8%). In delivery method, total normal vaginal delivery(N.V.D.) was 136 and transferred 17(12.5%), total cesarean section(C.S.) was 52 and transferred 7(13.5%). Transferred rank was N.V.D. female(17.9%). C.S. male(15.6%), C.S. female(10%), N.V.D.(8.6%). Of the 188 neonates. immature infants were 2 and transferred 1(50%), term infants were 184, transferred 23(12.5%), post-term infants were 2 and transferred none(0%). In age of women in childbed, transferred ratio was 15.4%(over 35), 15.2%(25-29), 10.5%(30-34). In fever,. C.S. infants were more transferred than N.V.D. and male infant had a tendency to transfer in later period of hospitalization and female in early period. It seems that transfer was related to abortion. In diarrhea, all was N.V.D. and their diagnosis was rotavirus. The average age of women in childbed was yonger(28.5). In jaundice, all was 1st, and average birth weight was lighter(3153g). The average age of women in childbed was older(30). In convulsion, birth weight was lighter(3153g), and age of women in childbed was older(30). Conclusion : There's any relation with sex and delivery method, birth weight and mother's age in transfer. But we cannot find any statistically significance. Further prospective studies are needed to find risk factors in transfer.

• 한국시스템다이내믹스연구
• /
• 제2권2호
• /
• pp.25-40
• /
• 2001

This paper describes the forecast of power plant construction in a competitive korean electricity market. In Korea, KEPCO (Korea Electric Power Corporation, fully controlled by government) was responsible for from the production of the electricity to the sale of electricity to customer. However, the generation part is separated from KEPCO and six generation companies were established for whole sale competition from April 1st, 2001. The generation companies consist of five fossil power companies and one nuclear power company in Korea at present time. Fossil power companies are scheduled to be sold to private companies including foreign investors. Nuclear power company is owned and controlled by government. The competition in generation market will start from 2003. ISO (Independence System Operator will purchase the electricity from the power exchange market. The market price is determined by the SMP(System Marginal Price) which is decided by the balance between demand and supply of electricity in power exchange market. Under this uncertain circumstance, the energy policy planners such as government are interested to the construction of the power plant in the future. These interests are accelerated due to the recent shortage of electricity supply in California. In the competitive market, investors are no longer interested in the investment for the capital intensive, long lead time generating technologies such as nuclear and coal plants. Large unclear and coal plants were no longer the top choices. Instead, investors in the competitive market are interested in smaller, more efficient, cheaper, cleaner technologies such as CCGT(Combined Cycle Gas Turbine). Electricity is treated as commodity in the competitive market. The investors behavior in the commodity market shows that the new investment decision is made when the market price exceeds the sum of capital cost and variable cost of the new facility and the existing facility utilization depends on the marginal cost of the facility. This investors behavior can be applied to the new investments for the power plant. Under these postulations, there is the potential for power plant construction to appear in waves causing alternating periods of over and under supply of electricity like commodity production or real estate production. A computer model was developed to sturdy the possibility that construction will appear in waves of boom and bust in Korean electricity market. This model was constructed using System Dynamics method pioneered by Forrester(MIT, 1961) and explained in recent text by Sternman (Business Dynamics, MIT, 2000) and the recent work by Andrew Ford(Energy Policy, 1999). This model was designed based on the Energy Policy results(Ford, 1999) with parameters for loads and resources in Korea. This Korea Market Model was developed and tested in a small scale project to demonstrate the usefulness of the System Dynamics approach. Korea electricity market is isolated and not allowed to import electricity from outsides. In this model, the base load such as unclear and large coal power plant are assumed to be user specified investment and only CCGT is selected for new investment by investors in the market. This model may be used to learn if government investment in new unclear plants could compensate for the unstable actions of private developers. This model can be used to test the policy focused on the role of unclear investments over time. This model also can be used to test whether the future power plant construction can meet the government targets for the mix of generating resources and to test whether to maintain stable price in the spot market.

• Journal of Animal Science and Technology
• /
• 제60권5호
• /
• pp.14.1-14.12
• /
• 2018

Background: Sheep production is a major component of the livestock sector in Ethiopia. The country owing to the large population of 30.70 million estimated numbers of sheep in the country and out of which about 72.14% are females, and 27.86% are males with diverse genetic resources. The real value of indigenous breeds was often under-estimated mostly due to their poor appearance and relatively low productivity. Developing countries in most cases opt for exotic breeds to increase animal productivity through crossbreeding or breed substitution without properly investigating the production potential of the indigenous breeds. The main objective of the research was to identify sheep flock composition and structure, farmers' traits of interest and breeding objective of Wollo highland sheep, and their $F_1$ crossbreed progenies. Results: Smallholder farmers' flock synthesized from breeding ewes, breeding rams, pre-weaned ewe lambs, pre-weaned ram lambs, unproductive ewes, castrated and fattened rams, with the percentage coverage of 29.2, 13.3, 15.5, 16.5, 12.4, and 12.5%, respectively. The maximum number of flock size was 289.0 sheep per flock and higher in the third stratum. The off-take rate percentage of the three strata presented as 21.9% in 1st stratum, 12% in the 2nd stratum, and 16.4% in the 3rd stratum and higher off-take rate recorded in the first stratum. Sheep producer's traits of interest ranked by growth rate (first), body size (second) and marketing value was third rank. Communal breeding (random mating), village based controlled breeding, mixed type and private ram controlled breeding practice were comprised of 39.7, 61.7, 52 and 71.3%, respectively. The percentages of ewes per flock composition were presented as 36.5, 27.1 and 25.5%, respectively in the 3rd stratum, 2nd stratum and 3rd stratum in the order of their importance's. Conclusion: Genetic improvement practices at smallholder sheep producers situation was showing promising outcome with indigenous Washera $F_1$ crossbred lambs and which designated for weaning rate, body size, marketing age, age at first lambing, good temperament and large litter size in the order of their rank. The contemporary breeding practice tendency indicated that, reduced flock size to improve flock productivity via crossbreeding practices.

• 환경생물
• /
• 제25권4호
• /
• pp.349-355
• /
• 2007

지렁이과 (family Megascolecidae) 왕지렁이속 (genus Amynthas) 그룹을 rDNA ITS 유전자를 이용하여 계통 유연관계를 알아보고자 하였다. 2과 10속에서 26종의 DNA 염기서열을 이용하여 종간 계통적 유연관계를 MP (Maximum Parsimony), NJ (Neighbor Joining), QP (Quartet Puzzling)로 계통도를 작성하였다. 염기서열이 확보된 Megascolecidae (지렁이과)의 국내외 26종에 대한 계통 분석은 위 3개의 알고리즘 모두 동일한 5개의 그룹으로 나뉘는 것을 확인하였다. 또한 Amynthas 속은 크게 한국산 그룹과 필리핀산 그룹으로 구분되었다. 첫 번째 그룹, Amynthas jirensis, A. agrestis, A. gucheonensis, A. sopaikensis, A. bubonis, A. multimaculatus, A. koreanus, A. dageletensis, A. heteropodus, A. odaesanensis, Pontoscolex sp., Pheretima sp. 1와 다른 그룹, Dendropheretima banahawensis. Amynthas halconensis, A. isarogensis, A. mindrooensis, Pithemera sp. 2, Pithmera sp. 1, and Pleionogaster sp.이다. 이는 ITS 유전자가 속간의 차이를 보여주는 것보다 동일한 속이라 하더라도 지리적 차이에 따른 환경의 영향을 받았음을 알 수 있다. 즉 형태적 분화가 이루어졌다고 하더라도 유전적으로는 동질성을 나타내고 있음을 알 수 있다. 형태적 특징에 의한 명백한 차이는 구분되지 않았다.