• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.235-247
• /
• 2020

Simulation study and validation on 50 L/hr pilot-scale Bunsen process was carried out in order to investigate thermodynamics parameters, suitable reactor type, separator configuration, and the optimal conditions of reactors and separation. Sulfur-Iodine is thermochemical process using iodine and sulfur compounds for producing hydrogen from decomposition of water as net reaction. Understanding in phase separation and reaction of Bunsen Process is crucial since Bunsen Process acts as an intermediate process among three reactions. Electrolyte Non-Random Two-Liquid model is implemented in simulation as thermodynamic model. The simulation results are validated with the thermodynamic parameters and the 50 L/hr pilot-scale experimental data. The SO₂ conversions of PFR and CSTR were compared as varying the temperature and reactor volume in order to investigate suitable type of reactor. Impurities in H₂SO₄ phase and HI_X phase were investigated for 3-phase separator (vapor-liquid-liquid) and two 2-phase separators (vapor-liquid & liquid-liquid) in order to select separation configuration with better performance. The process optimization on reactor and phase separator is carried out to find the operating conditions and feed conditions that can reach the maximum SO₂ conversion and the minimum H₂SO₄ impurities in HI_X phase. For reactor optimization, the maximum 98% SO₂ conversion was obtained with fixed iodine and water inlet flow rate when the diameter and length of PFR reactor are 0.20 m and 7.6m. Inlet water and iodine flow rate is reduced by 17% and 22% to reach the maximum 10% SO₂ conversion with fixed temperature and PFR size (diameter: 3/8", length:3 m). When temperature (121℃) and PFR size (diameter: 0.2, length:7.6 m) are applied to the feed composition optimization, inlet water and iodine flow rate is reduced by 17% and 22% to reach the maximum 10% SO₂ conversion.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.1
• /
• pp.103-109
• /
• 2009

In order to isolate antibiotic producing microorganisms, several actinomycetes were isolated from soil samples. The aerial hyphae of Y-88 strain were gray in color with tree types. Under the microscopic examination, the Y-88 isolate formed a spiral aerial spore mass with a smooth surface and a rectiflexibilis type of spore chain. Y-88 utilized glucose, fructose, arabinose, and sucrose, but not rhamnose, raffinose, mannitol, or inositol. In addition, Y-88 produced melanin on the tyrosine agar and the strain could utilize L-valine, L-phenylalanine, and L-hydroxyproline. Based on these results and the cultural and physiological characteristics described in the Bergey's Manual, the Actinomycetes, Y-88, was identificated as a Streptomyces species. The optimum medium conditions for this antibiotic producing Streptomyces sp. Y-88 was 1.6% soluble starch, 0.6% glucose, 0.6% beef extract, 0.01% $K_2HPO_4$, 0.01% $MgSO_4$ $7H_2O$, and 0.01% $ZnSO_4$ $7H_2O$ at an initial pH of 4.0, and 25$^{\circ}C$.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.407.2-407
• /
• 2001

• Journal of Korean Society on Water Environment
• /
• v.24 no.4
• /
• pp.415-422
• /
• 2008

Drinking water treatment is enhanced by coagulant dosages and chlorine injection because of pH increase in raw water in droughty seasons such as spring and fall. But water quality deterioration is occurred by increase in residual aluminium and disinfection by-products. Coagulation process can be used to control natural organic matter (NOM) during water treatment. The effect of coagulation process appeared to depend on the pH of water rather than coagulant dosages. In this study, for water treatment in high pH season $H_2SO_4$ was applied for pH adjustment at full scale. Before and after pH adjustment by $H_2SO_4$ injection, water quality of drinking water was evaluate. In the result of investigation of total organic carbon (TOC) removal in high pH season, TOC was removed approximately 30~40%, which showed decrease in water treatment efficiency. Also, it is increased both particle numbers and residual Al concentration in the water. After $H_2SO_4$ injection for adjustment to pH<7.5 in settled water, treated water turbidity decreased in 0.047 NTU from 0.059 NTU, and particle numbers of filtered water decreased in 20/mL from 90/mL. On the other side, TOC removal efficiency increased in approximately 10% after adjustment of pH. In the result of decrease in pH in raw water through more coagulants and prechlorine without $H_2SO_4$ injection, trihalomethanes (THMs) concentration increased in $16{\mu}g/L$ from $8{\mu}g/L$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.4 no.2
• /
• pp.72-81
• /
• 1988

The typical ARIMA model which was developed by Box and Jenkins, was applied to the monthly $SO_2$ data collected at Seoungsoo and Oryudong in metropolitan area over five years, 1982 to 1986. To find out the changing pattern of $SO_2$ concentration, autocorrelation and partial autocorrelation analysis were undertaken. The three steps of time series model building were followed and the residual series was found to be a random white noise. The results of this study is summarized as follows. 1) The monthly $SO_2$ series was found to be a non-stationary series which which has a periodicity of 12 months. After eliminating the periodicity by differencing, the monthly $SO_2$ series became a stationary series. 2) The ARIMA seasonal model of the $SO_2$ was determined to be ARIMA $(1, 0, 0)(0, 1, 0,)_{12}$ model. 3) The model equations based on the prediction were: for Seoungsoodong: $Y_t = 0.5214Y_{t-1} + Y_{t-12} - 0.5214Y_{t-13} + a_t$ for Oryudong: $Y_t = 0.8549Y_{t-1} + Y_{t-12} - 0.8549Y_{t-13} + a_t$ 4) The validity of the model identified was checked by compairing the measured $SO_2$ values and one-month-ahead predicted values. The result of correlation and regression analysis is as follows. Seoungsoodong: $Y = 0.8710X + 0.0062 r = 0.8768$ Oryudong : $Y = 0.8758X + 0.0073 r = 0.9512$

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.419-422
• /
• 2000

A three-phase fluidized-bed bioreactor including Thiobacillus sp. IW was tested to remove H_2S and $NH_3$ simultaneously. The inlet $H_2S$ was oxidized to $SO_4^{2-}$ by Thiobacillus sp. IW, and the $NH_3$ reacted with the $SO_4^{2-}$ to form $(NH_4)_2SO_4$. The removal efficiency of $H_2S$ was 98.4-99.9% for an inlet concentration of 36-730 ppm and that of $NH_3$ was 60.2-99.2% for an inlet concentration of 45-412 ppm. The removal efficiency of $NH_3$ was reduced when the inlet loading rate of $NH_3$ was increased above 10 mg/l/h. When the bioreactor was operated for 25 days with a lower inlet concentration of $NH_3$ compared with the of $H_2S$, the bioreactor exhibited an excellent performance with a stable pH, dissolved oxygen content, and cell concentration.

• Mycobiology
• /
• v.36 no.3
• /
• pp.178-182
• /
• 2008

In order to increase the mycelial production of Phellinus linteus, which exhibits potent anticancer activity, some ingredients of the medium used to culture P. linteus were investigated. The optimal medium composition for the production of Phellinus linteus was determined to be as follows: fructose, 40 g/l; yeast extract, 20 g/l; $K_2HPO_4$, 0.46 g/l; $K_2HPO_4$, 1.00 g/l; M$MgSO_4\cdot7H_2SO$, 0.50 g/l; $FeCl_2\cdot6_2O$, 0.01 g/l; $MnCl_2\cdot4H_2O$, 0.036 g/l; $ZnCl_2$, 0.03 g/l; and $SuSO_4\cdot7H_2O$, 0.005 g/l. The optimal culture conditions were determined to be as follows: temperature, 28$^{\circ}C$; initial pH, 5.5; aeration, 0.6 vvm; and agitation, 100 rpm, respectively. Under optimal composition and conditions, the maximum mycelial biomass achieved in a 5 l jar fermentor was 29.9 g/l.

• Journal of fish pathology
• /
• v.18 no.2
• /
• pp.179-185
• /
• 2005

In Vitro hemolysis and methemoglobin (MetHb) formation in olive flounder rythrocytes were investigated using potassium permanganate ($KMnO_4$) ranging from 2 to 250 ppm, stabilized chlorine dioxide ($S-ClO_2$)ranging from 3.13 to 400 ppm, formalin (37% formaldehyde) ranging from 31.3 to 2,000 ppm and copper sulphate ($CuSO_4$) ranging from 0.04 to 5 ppm. Remarkable hemolysis was found to be induced at $KMnO_4$ concentrations of 31.3-250 ppm and $CuSO_4$ concentrations of 0.63-5 ppm. On the other hand, MetHb formation could not be found at the same treatment concentrations. It is suggested that the cell-damaging system of $KMnO_4$ may be similar from that of $CuSO_4$ in the erythrocytes of olive flounder. Remarkable hemolysis and MetHb formation were found to be induced at $S-ClO_4$ concentrations of more than 25 ppm and 6.25 ppm, respectively. Only $S-ClO_2$ showed both hemolysis and MetHb formation among the chemicals used in the present study. Formalin did not provoke hemolysis at the highest concentration of 2,000 ppm but induced MetHb formation at ranging from 250 to 2,000 ppm. These findings reveal that the mechanism involved in formalin-induced cell-damaging effects differs from that induced by $S-ClO_2$ to olive flounder erythrocytes compared with $KMnO_4$ and $CuSO_4$.

• Journal of the Korean Chemical Society
• /
• v.16 no.4
• /
• pp.241-248
• /
• 1972

The adsorption of Methylene Blue on Yeong-Il bentonite which was treated by aqueous NaOH, $Na_2SO_4 or NaHSO_4 solution respectively, varying concentrations, temperature and time, was studied. In case of treatment with NaHSO_4 solution, slight improvement of the adsorption of Methylene Blue on bentonite was observed. With Na_2SO_4$ solution, the best results obtained when bentonite was treated with 1 N of the solution for 2hr at $100^{\circ}C$, and the adsorption capacity of the product was 3 times better than that of original bentonite. At the higher concentration and the higher temperature than above, faujasite was formed. With NaOH solution, the best condition was in 1N solution for 1hr at $100^{\circ}C$ and the adsorption capacity of the product was 3.3 times better than that of original bentonite. At the higher concentration of the treating agent and at the higher temperature than above, hydroxysodalite was formed.

• Journal of Environmental Science International
• /
• v.2 no.3
• /
• pp.217-225
• /
• 1993

This study was performed at Sa-Sang Industrial area in Pusan City. To measure the total suspended particulates(T.S.P) and $SO_3$ following places was selected industrial area, down town, residentail area. T.S.P was collected on glass filters by High-Volume Air Sampler, $SO_3$ was measured by PbO2 Candle method. The collected T.S.P was analyzed for various anlon(for example, $NO_3$, $SO_4$, $PO_4$, F, Cl) by ion Chromatography, and Pb by Inductively Coupled Plasma.