• 제목/요약/키워드: $SO_2$ adsorption

검색결과 348건 처리시간 0.037초

Redox Behavior of Sn and S in Alkaline Earth Borosilicate Glass Melts with 1 mol% Na2O

  • Kim, Ki-Dong;Kim, Hyo-Kwang
    • 한국세라믹학회지
    • /
    • 제46권3호
    • /
    • pp.271-274
    • /
    • 2009
  • Redox investigation of Sn and S ion was attempted in alkaline earth borosilicate glass melts with only 1 mol% $Na_2O$ by means of Square Wave Voltammetry (SWV). According to voltammograms, there was only one peak due to $Sn^{4+}/Sn^{2+}$ in melt doped with $SnO_2$. The calculated standard enthalpy and entropy of the reduction of $Sn^{4+}$ to $Sn^{2+}$ were 116kJ/mole and 62 J/mol K, respectively. The determined redox ratio, [$Sn^{2+}$] / [$Sn^{4+}$] in the temperature range of $1300{\sim}1600^{\circ}C$ was in $0.4{\sim}2.1$. On the contrary, in the voltammogram of melt doped with $BaSO_4$ there was no peak due to $S^{4+}/S^o$ but shoulder that might be attributed to the adsorption of sulfur at the electrode. The absence of the peak related with $S^{4+}/S^o$ was discussed from the view-point of the thermal decomposition behavior of $BaSO_4$ in the glass batch.

Enhanced Removal of Phenol from Aquatic Solution in a Schorl-catalyzed Fenton-like System by Acid-modified Schorl

  • Xu, Huan-Yan;Prasad, Murari;Wang, Peng
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권4호
    • /
    • pp.803-807
    • /
    • 2010
  • Schorl modified by $H_2SO_4$ has been successfully developed to enhance schorl-catalyzed Fenton-like reaction for removal of phenol in an aqueous solution. The phenol removal percentage can be increased from 4% to 100% by the system of modified schorl and $H_2O_2$. Batch experiments indicate that the percent increases in removal of phenol by increasing the dosage of catalyst, temperature and initial concentration of $H_2O_2$. The results of XRD, FT-IR and SEM suggest that no new phases are formed after removal of phenol by modified schorl. ICP-AES results reveal that more dissolution of iron results in higher catalytic oxidant activity in the system of modified schorl and $H_2O_2$. Besides minor adsorption, mineral-catalyzed Fenton-like reaction governs the process.

염산용액내에 황산 첨가에 의한 알루미늄의 교류에칭 특성 (Effect of Sulfuric Acid Addition on the Aluminum AC Etching in HCl Solution)

  • 김행영;최진섭;탁용석
    • 공업화학
    • /
    • 제9권4호
    • /
    • pp.463-468
    • /
    • 1998
  • 알루미늄의 부식에 있어서 HCI 용액내에 황산을 첨가하는 경우 황산이온의 화학적 흡착에 의한 부식억제 효과가 나타나며, CV (cyclic voltammetry) 실험결과 황산이온은 핏트내부에 보호성 산화피막을 생성함으로서 에치핏트가 핏트내부와 알루미늄 표면에 함께 생성되어 핏트의 밀도가 증가하였다. 알루미늄 교류에칭시에 핏트분포는 황산이온의 농도와 환원전류량에 의하여 크게 영향을 받으며, 환원전류인가시 $0.8mC/cm^2$ 이하의 전하량에서 핏트내부에 생성된 산화피막은 황산이온 농도의 증가에 따라 핏트발생에 대한 저항성이 중가하였으나, $0.8mC/cm^2$ 이상에서는 산화피막내에 국부적인 구조변화가 발생하며 황산이온 농도에 관계없이 산화피막의 파괴가 빠르게 진행되었다.

  • PDF

철도 노반 재료의 중금속 흡착특성과 안전성에 관한 연구 (A study on the adsorption characteristic and safety assessment of railway subsoil material)

  • 백승봉;길경익
    • 한국습지학회지
    • /
    • 제17권2호
    • /
    • pp.146-154
    • /
    • 2015
  • 국내의 철도 산업은 친환경적 지속가능한 교통으로 많은 관심을 받으며 지속적인 산업발전을 이루어왔다. 하지만 철도운영 시 발생하는 중금속 오염물질에 대한 처리 및 예방이 미흡하다. 철도 운영 시에 발생하는 중금속은 강우 시 강우유출수와 함께 흘러나온다. 특히 철도 교량의 경우 강우 시 중금속이 강우 유출수와 함께 수계로 직접 유입되어 하천 및 호소 등 오염의 원인으로 작용한다. 이러한 중금속 유출을 예방하기 위해선 철도 노반 재료의 흡착능이 중요하다. 본 연구에서는 기존에 철도 노반의 주 재료로 사용되는 자갈과 고로슬래그의 흡착능에 대하여 분석하였으며, Freundlich와 Langmuir 등온흡착식을 이용하여 고로슬래그의 흡착 특성에 대한 연구를 수행하였다. 그 결과 고로슬래그의 흡착양이 Cd와 Cu는 초기에 자갈보다 높게 나타났고, Pb와 Zn은 자갈의 흡착양이 높게 나타났다. 하지만 시간이 지남에 따라 고로슬래그의 흡착양이 기존에 철도 노반 재료로 쓰이는 자갈에 비하여 높게 나타났다. 흡착 특성은 Freundlich 등온흡착식에 비하여 Langmuir 등온흡착식에서 중금속의 결정계수가 더 높은 것으로 분석되었다. 또한 모델링을 이용하여 철도 노반 재료로서의 안전성을 평가하였다. 또한 모델링을 통해 기존 노반재료와의 안전성 비교 분석을 실시하였다. 그 결과 기존 노반재료인 자갈에 비하여 변형율이 약 10%정도 낮은 것으로 나타났다. 이는 중금속의 수계 유출을 예방 및 안전성 확보 측면에서 철도 노반 재료로 고로슬래그를 적용할 수 있을 것으로 판단된다.

우라늄의 분리 및 회수에 관한 연구 (A study on the separation and recovery of uranium)

  • 노기환;김준태
    • 환경위생공학
    • /
    • 제12권1호
    • /
    • pp.15-23
    • /
    • 1997
  • The anionic exchange resins with the Dowex-1 and Amberlite CG-400 form were transformed into resin of sulfate and acetate acid form, respectively. The uranyl complex ions with SO$_{4}$$^{2-}$ and CH$_{3}$COO$^{-}$ were adsorbed on the anion exchange resion mentioned above, and these complex ions were eluted as mixture eluents of 0.7M HNO$_{3}$ - 0.5M NH$_{4}$NO$_{3}$ by anion exchange chromatography. The optimum adsorption conditions of uranyl anion complex ions adsorbed on the upper of the resin colmun were 1.5-2.0 ml/min of flow rates at pH 2.0 and adsorptive power of uranyl complex ion of sulfuric acid type were nearly consistent with the Caussion normal distribution curve, whereas the elution state of UO$_{2}$(Ac)$_{2}$$^{4-}$ with acetic acid type was departed. The weighing form obtained from resin of sulfuric acid and aceric acid type was U$_{3}$O$_{8}$ whose recovery was 91.7%. The possibility of recovering uranium from the monazite sulfate solution using a strong base anion resin, Amberlite CG-400(sulfate form), was successfully recovered more than 90%.

  • PDF

Dispersion of Aqueous $Al_2O_3$Suspensions with Electrolytes; Influence of the Counter Ion

  • Cecile Pagnoux;Richard Laucournet;Thierry Chartier;Baumard, Jean-Francois
    • The Korean Journal of Ceramics
    • /
    • 제6권3호
    • /
    • pp.280-285
    • /
    • 2000
  • The electrolyte, $(HO)_2C_6H_2(SO_3Na)_2H_2O $(Tiron), disperses efficiently alumina powder in aqueous media and stable suspensions with 60 vol% solid loading can be prepared. The strong adsorption of this additive is mainly due to the ability of the molecule to form chelate rings with the particle surface but electrostatic interactions between the surface charge and the anionic dispersant strongly influence the amount of Tiron adsorbed. By using a cationic exchange route to substitute the counter ion which neutralizes the sulfonate groups, new molecules of dispersant have been prepared, either with mineral cations as $Li^+,\; Na+^,\; NH_4^\;+$, or with organic cations as counter ion but organic counter ions lead to less to less viscous suspensions than $Na^+$ in particular when the number of carbon atoms of the aliphatic chain increases from 1 to 3.

  • PDF

기체 투과 선택성 포장 필름 내 배 호흡현상 예측 (Predicting Respiration Rate of Pear in film package of Selective gas permeation)

  • 심승우;류동완;박찬영
    • 한국산업융합학회 논문집
    • /
    • 제2권1호
    • /
    • pp.105-112
    • /
    • 1999
  • Model predicting the respiration rate of pear under modified LDPE film pouch has been developed. The assumptions of the model have three bases; 1) respiration rate is depending on $CO_2$ and $O_2$ concentration in the package, 2) the oxidation of glucose in pear generates carbon dioxides, and 3) gases permeation through the package film bases on the Langmuir adsorption theory and Fick's law. The simulated results agreed fairly well with the experimental data so as this model to be useful in designing the modified atmospheric packaging system.

  • PDF

목질 및 수피탄화물에 의한 기상 유해가스 흡착제거 (Removal of Harmful Gas with Wood or Bark Charcoal)

  • 조태수
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권6호
    • /
    • pp.69-76
    • /
    • 2008
  • 탄화온도별로 제조한 신갈나무(Quercus mongolica Fischer)목탄과 낙엽송(Larix leptoepis)수피탄에 의한 유해가스 흡착성능 평가를 하여 본 결과, 탄화온도가 증가하면 비표면적과 탄소함량이 증가하는 경향이 있으나, $600^{\circ}C$이상의 온도에서는 상승폭이 둔화하였다. 또한 신갈나무탄과 낙엽송수피탄에 의한 유해가스 제거율 차이는 뚜렷하지는 않았으나, 탄화온도는 가스흡착성능에 큰 영향을 주는 것으로 나타났다. 즉, $300^{\circ}C$에서 탄화한 저온 목질탄화물은 목탄 또는 수피탄의 종류에 관계없이 50% 이하의 매우 낮은 악취가스 및 VOC 물질 제거율을 나타낸 반면, $600^{\circ}C$이상의 고온 탄화물은 목질의 종류에 관계없이 악취물질인 트리메틸아민, 메틸메르캅탄, 황화수소의 제거율과 VOC물질인 벤젠, 톨루엔, 자일렌 제거율이 거의 100%를 나타낼 정도로 높았으며, 흡착 10분 이내에 흡착평형에 이를 정도로 빠른 흡착성을 나타내었다. 한편 아세틸렌이나 $SO_2$, $NO_2$ 가스 제거율은 고온탄화물이라도 흡착 4시간 후인 흡착평형이 이루어지더라도 40% 이하로 매우 낮아 가스 종류에 따라서 흡착거동에 차이가 있었다. 이와 같이 탄화온도와 가스 종류에 따라 흡착성능이 달라지는 것은 비표면적과 같은 물리적인 요인뿐만 아니라 목탄의 관능기 종류 및 양에 의한 화학적 변화가 영향을 미치는 것으로 판단되며, 화학적 요인에 대한 구명이 필요할 것으로 생각된다.

The influences of film density on hydration of MgO protective layer in plasma display panel

  • Lee, Jung-Heon;Eun, Jae-Hwan;Park, Sun-Young;Kim, Soo-Gil;Kim, Hyeong-Joon
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.228-231
    • /
    • 2002
  • We report the effect of density of thin films on moisture adsorption and hydration of MgO thin film, usually used as a protective layer in AC-PDP After hydration, lots of hemispherical shaped clusters, $Mg(OH)_2$, formed on the surface of MgO thin films. However clusters formed on low-density thin films were bigger than those on high-density films. From ERD spectra, it seemed that the concentration of hydrogen was very high in the region 20 nm from the surface of MgO thin film. The low-density thin film had more hydrogen than high-density thin film. From simulation results of ERD and RBS it was found that hydration reaction also occurred in the inner part of the film. So diffusion of Mg atoms from the inner part of the film to the surface and $H_2O$ molecules from the surface to the inner part of the film is important. And because low density thin film has many short paths for diffusion of Mg atoms and $H_2O$ molecules, low-density thin film is more hydrated. So to suppress hydration of MgO thin films, high-density thin film is needed.

  • PDF

Selection of L-arabinase gene to degrade Corn fiber

  • Ahn, Mi-Sun;Lee, Hyoung-Joo;Ryu, Yeon-Woo
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2005년도 생물공학의 동향(XVI)
    • /
    • pp.317-321
    • /
    • 2005
  • L- arabinose residues are widely distributed in plant cell walls, where they are present in polymers such as arabinans, arabinoxylans, arabinogalactans and arabinogalactan proteins. L-arabinose suppress intestinal sucrase and decrease the adsorption of sugar in the small intestine, consequently, weight loss and fatness prevent. Now, xylose be used replacement sugar and arabinose be utilized fatness prevent of our time. Various Agricultural surplus like com fiber, contain $20\;{\sim}\;40%$ of hemicellulose. Corn fiber from Agricultural Renewable Biomass was chosen the best suitable material for arabinose production. In this work, we searched about for L-arabinose gene in compost, metagenome pool and indonesian soil. So, the B1029 TS2-8 of L-arabinase gene in compost was selected by YNB media(5% yeast nitrogen base, 5% arabinogalactan). After enzyme reaction with corn fiver, B1029 TS2-8 produced 2.15 g/L of L-arabonose.

  • PDF