• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.3
• /
• pp.217-225
• /
• 2001

Any fracture passing through the socket of a teeth is compounded intraorally, even if the fracture is not displaced and the tooth is firm in its socket. Before the advent of antibiotic therapy the danger of infection in a compounded fracture posed severe problems in treatment. Infection is reduced by antibiotic therapy but prolonged use of antibiotics is not justified in an attempt to save a tooth which might eventually be sacrificed. There is still controversy in the management of third molar in mandibualr angle fracture, particulary in regard to their retention or removal at the time of fracture treatment. So we surveyed the 159 patients who were treated with open reduction of mandibular angle fracture containing third molar in fracture line, and compared with the postoperative infection rate depending on time intervals between injury and operation, eruption state of third molar, non-extraction or extraction of third molar related to eruption state, non-extraction or extraction of third molar related to condiition of third molar and its surrounding periodontium and were to propose treatment guidline of third molar in mandibular angle fracture The results obtained were as follows : 1. There were no statistical significance between the time from injury to operation and postoperative infection. 2. There were no statistical significance between eruption state of third molar and postoperative infection. 3. In case of retention of the third molar, there were no statistical significance between eruption state of third molar and postoperative infection, but in case of extraction, postoperative infection was high rate in complete impacted cases. 4. There were no statistical significance between non-extraction or extraction of third molar and postoperative infection depending on condition of third molar. There are no difference in infection rate statistically according to the time from injury to operation, eruption state and condition of third molar, but retention of third molar revealed lowered infection rate in completely impacted cases. By terms of the manegement of third molar, we should extract or preserve third molar in the line of the mandibular angle fracture according to possibility of infection.

• Journal of Periodontal and Implant Science
• /
• v.33 no.2
• /
• pp.159-166
• /
• 2003

The purpose of this study was to investigate and compare the frequence of 4 periodontal pathogens in the supra- and subgingival plaque in periodontally healthy subjects. Twenty adult individuals aged 22 to 28 years (mean age 23.65 years) participated in this study. All subjects had no pocket sites more than 3 mm deep, and the sites selected for sampling were all negative for bleeding. After drying and isolation of the sites with cotton rolls, supragingival plaque was sampled using sterile periodontal curette. Each plaque sample was placed in individual tubes containing 500 ml of 1X PBS. After removal of the supragingival sample and any remaining supragingival plaque, subgingival plaque samples were taken from the same sites using sterile curette and placed in similar individual tubes. Identification of 4 putative periodontal pathogens from the samples was performed by polymerase chain reaction based on 16S rDNA. Chi-square test was employed to identify significant explanatory variables for the presence of the 4 periodontal pathogens. The data show that Actinobacillus actinmycetemcomitans, Porphyromonanas gingivalis, Bacteroides forsythus, and Fusobacterium nucleatum occurred in 16.9%, 14.4%, 52.5%, and 80.6%, respectively. No significant differences were noted in the periodontal pathogens between supra- and subgingival plaques according to the kind of teeth. However, the incisors were at higher risk for harboring F. nucleatum (p <0.05). Conclusion: These results reveal that anaerobic periodontal pathogens can be detected in supragingival plaques. Supragingival plaque may function as a reservoir of peri-odotopathogens.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.703-719
• /
• 1995

The purpose of this study was to observe the effects of the periodontal ligament on the healing and the formation of alveolar bone in the extraction socket, when this ligament had artificially remained in the socket during the tooth removal. Twenty rats aged 4 weeks were used and devided into the control groups (10) and the experimental groups (10) in this study. The maxillary right and left first molars were extracted in both groups. In the experimental groups the periodontal ligament was remained in the extraction sockets using 0.4% ${\beta}-aminopropionitrile$, and in the control the periodontal ligament was completely removed by curettage. At 1, 3, 5, 7 and 14 days after the tooth extraction, rats in both groups were serially sacrificed. And the specimens were prepared with Hematoxylin-Eosin stain for the light microscopic evaluation. The results of this study were as follows ; 1. On 1 day, the periodontal ligament was only found in the extraction socket walls of the experimental groups, and there was not the distinguishable difference between the control and the experimental groups. 2. On 3 days, there were more collagen fibers and the appearance of higher cellular density in the experimental groups than in the control. And the cells and collagen of the periodontal ligament were so actively proliferated and synthesized that invaded into the connective tissue of the extraction sockets in the experimental groups. 3. In the experimental groups, the trabecular bone was formed on the basal and lateral bone surface on 5 days. However, there was not the new bone forming appearance in the control groups at this time. 4. On 7 days, the trabecular bone was formed in the control groups. 5. On 14 days, the extraction sockets were almost entirely filled with the bony trabeculae in both groups. But, compared to the control group, the experimental groups showed the prominent differences in the amount & the density of the new bone formed. In conclusion, it was suggested that the residual periodontal ligament tissue in the extraction socket will play a major role as the important cell source in the healing and the new bone formation of the extraction socket.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.138-146
• /
• 2018

Photodynamic therapy (PDT) is a great potential approach for the localized tumor removal with fewer metastatic potentials and side effects in treating the disease. In the treatment process, a photosensitizer (PS) that absorbs a light energy to generate reactive oxygen is essential. In general, a visible light is used as a light source of PDT, so that side effects from the light source are inevitable. For this reason, upconversion nanoparticles (UCNPs) using near-infrared (NIR) as an excitation source are attracting attention in the field of disease diagnosis and treatment. UCNPs have the low cytotoxicity and phototoxicity, and also advantages such as deep tissue penetration and low background autofluorescence. For PDT, UCNPs should be combined with a PS which absorbs the light energy from UCNPs and transfers it to the surrounding oxygen to produce reactive oxygen. In addition, the therapeutic efficacy can be improved by modifying nanoparticle surfaces, adding anti-cancer drugs, or combining with photothermal therapy (PTT). In this review, we summarize the recent research to improve the efficiency of PDT using UCNPs.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.5
• /
• pp.349-354
• /
• 2011

Introduction: Mandibular third molar extraction is one of the most common procedures performed in oral and maxillofacial surgery units. Although the overall complication rate is low with most complications being minor, mandibular third molar removal is so common that the population morbidity of complications might be significant. Therefore, efforts to limit intraoperative or postoperative complications might have a significant impact in terms of enhancing the patient outcome. The aims of this study were to identify the position and angulation associated complications after mandibular third molar extractions. Materials and Methods: This study surveyed 568 patients who had a mandibular third molar extracted, showed clinical complications and underwent a radiographic measurement of the available space, depth and spatial relationship. Results: The results obtained were as follows: 1. The complications were a dry socket, nerve injury, root rest, infection, bleeding, hamatoma, and adjacent teeth injury. 2. There were no significant differences between the complication and ramus relationship (available space) of the mandibular third molar. 3. There were no significant differences between the complications and depth of the mandibular third molar. 4. There were no significant differences between the complications and spatial relationship of the mandibular third molar. Conclusion: There were no significant differences in the complication rate, ramus relationship, depth and spatial relationship of the mandibular third molar. This suggests that the position and angulation of the mandibular third molar may not have an impact on the complications. The relationship between the position and angulation of the mandibular third molar, and complications deserves a further study using longitudinal data.

• Journal of Wetlands Research
• /
• v.9 no.2
• /
• pp.1-8
• /
• 2007

Since 2000, environmental policies and regulations in Korea are rapidly changing to TMDL(Total Maximum Daily Load) and nonpoint source control. This is due to bad water quality in drinking water sources. Although many environmental facilities having high removal efficiency are constructed and applied in nationwide for controling various pollutants from wastewaters, the water quality in rivers is worse and worse because of nonpoint pollution. In fact, TMDL is a new environmental regulation controling total daily loadings from watershed areas. Actually, the nonpoint pollutant is originated from various landuses and its control is based on TMDL regulation. Therefore, this research is performed to determine the size of detention basin to control nonpoint pollutants from resort developing areas. The detention basin is one of best management practices, which is useful for controling pollutants and flooding from the developing areas. However, it should be designed and constructed with cost effective method. Recent 10 years rainfall data are used to determine the size of detention basin. The cost effective size is determined to 7.4mm accumulated rainfall.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.2
• /
• pp.105-116
• /
• 2004

According to the developing advanced techniques and removal of Selective Availability, much research has been conducted to improve the accuracy of GPS positioning in absolute and relative mode by estimating the nuisance parameters such as atmospheric effect, clock errors and multipath. Especially, the continuous effort of establishing the CORS in many countries and the effort of ICS making effective global networking make more application areas and the necessity of more precise location is being increased. Some of the countries like German, Japan and Swiss already utilized the Virtual Reference System for better location accuracy and services. In this study, the VRS system is investigated in terms of system principle, required H/W and S/W, management and operation, revision of related law, expected application and market etc. and find optimal solution in each aspect for economic and fast set up of the system in this country. The analysis of Korean CORS, communication infra and market estimation is performed for the efficient system establishment. Also. the suggestion on the advertisement and education of the system is also included. It is expected that this study contributes for the establishment of effective and precise nationwide location service so that many SOC areas including navigation, GIS, Telematics, LBS can provides better service for the users.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1999.04a
• /
• pp.5-5
• /
• 1999

The Principal deficiency of the existing notion about the sintering-mixtures consists in the fact that almost no attention is focused on the Phenomenon of alloy formation during sintering, its connection with dimensional changes of powder bodies, and no correct ideas on the driving force for the sintering process in the stage of establishing chemical equilibrium in a system are available as well. Another disadvantage of the classical sintering theory is an erroneous conception on the dissolution mechanism of solid in liquid. The two-particle model widely used in the literature to describe the sintering phenomenon in solid state disregards the nature of the neighbouring surrounding particles, the presence of pores between them, and the rise of so called arch effect. In this presentation, new basic scientific principles of the driving forces for the sintering process of a two-component powder body, of a diffusion mechanism of the interaction between solid and liquid phases, of stresses and deformation arising in the diffusion zone have been developed. The major driving force for sintering the mixture from components capable of forming solid solutions and intermetallic compounds is attributed to the alloy formation rather than the reduction of the free surface area until the chemical equilibrium is achieved in a system. The lecture considers a multiparticle model of the mixed powder-body and the nature of its volume changes during solid-state and liquid-phase sintering. It explains the discovered S-and V-type concentration dependencies of the change in the compact volume during solid-state sintering. It is supposed in the literature that the dissolution of solid in liquid is realised due to the removal of atoms from the surface of the solid phase into the melt and then their diffusicn transfer from the solid-liquid interface into the bulk of liquid. It has been shown in our experimental studies that the mechanism of the interaction between two components, one of them being liquid, consist in diffusion of the solvent atoms from the liquid into the solid phase until the concentration of solid solutions or an intermetallic compound in the surface layer enables them to pass into the liquid by means of melting. The lecture discusses peculimities of liquid phase formation in systems with intermediate compounds and the role of the liquid phase in bringing about the exothermic effect. At the frist stage of liquid phase sintering the diffusion of atoms from the melt into the solid causes the powder body to grow. At the second stage the diminution of particles in size as a result of their dissolution in the liquid draws their centres closer to each other and makes the compact to shrink Analytical equations were derived to describe quantitatively the porosity and volume changes of compacts as a result of alloy formation during liquid phase sinteIing. Selection criteria for an additive, its concentration and the temperature regime of sintering to control the density the structure of sintered alloys are given.

• Economic and Environmental Geology
• /
• v.40 no.5
• /
• pp.575-585
• /
• 2007

Microbial control of the geochemical behavior of heavy metals (Cd, Cu, Pb, and Zn) and As in contaminated subsurface soil and sediment was investigated through activation of indigenous bacteria with lactate under anaerobic condition for 25 days. The results indicated that dissolved Cd, Pb and Zn were microbially removed from solutions, which was likely due to the formation of metal sulfides after reduction of sulfate by indigenous sulfate-reducing bacteria. Soils from the Dukeum mine containing a large amount of sulfate resulted in complete removal of dissolved As after 25 days by microbial activities, while there were gradual increases in dissolved As concentration in soils from the Hwabuk mine and sediments from the Dongducheon industrial area which showed low $SO_4{^2-}$ concentrations. Addition of appropriate carbon sources and sulfate to contaminated geological media may lead to activation of indigenous bacteria and thus in situ stabilization of the heavy metals; however, potential of As release into solution after the amendment should be preferentially investigated.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.5
• /
• pp.428-434
• /
• 2001

After miniplate fixation of mandibular angle fractures, fracture line stability during functional loading was evaluated. Using panoramic radiographs, 15 mandibular angle fracture patients who were treated by open reduction and one miniplate fixation along the external oblique ridge, were evaluated at postoperative 1, 4 and 8 weeks. At each time, 2 radiographs were taken: one taken during maximum biting of hardened silicone sheet on the affected side molar area and the other on the non-affected side. The distraction gap of inferior border of mandible at each time and each side was measured and these data were analysed statistically with clinical findings. The differences of inferior border distraction gap during hardened silicone sheet biting on the affected side molar area and on the non-affected side molar area at 4 week radiographs were smaller than those of 1 week's except one case. At 8 week's radiographs, the fracture lines were so stabilized that it was almost impossible to find the gap differences except one case and there were increased radiopacity along the entire fracture lines. Clinically, bony union was confirmed in all cases during plate removal performed at postoperative 6 month. By statistical analysis(paired t-test), the inferior border distraction gap during biting of hardened silicone sheet on the affected side was significantly reduced during 1 and 4 week interval(p<0.01). The differences of inferior border distraction gap during biting on the affected side molar area and on the non-affected side molar area were also significantly reduced at 1 and 4 week interval(p<0.01). But the inferior border distraction(compression) gap during non-affected side biting was not significantly changed. From these findings, it could be concluded that fracture line stability during functional loading after one miniplate fixation of mandibular angle fractures stems mainly from reduction of inferior border distraction gap during affected side biting on time interval. According to these radiographic and clinical findings, the clinical superiority of one miniplate fixation technique in mandibular angle fracture treatment could be confirmed.