• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.453-458
• /
• 1986

The present study was directed to investigate the antioxidative effects of onion and mustard powder extracts on fish oil. The oxidative changes of sardine oil with and without onion and mustard powder extract were estimated by measuring peroxide value (POV), thiobarbituric acid (TBA) value, weighing method, acid value (AV) and fatty acid composition, periodically. The results obtained are summarized as follows ; From view point of POV, fat soluble fraction of onion and mustard powder showed much inhibitory effect on the oxidation of sardine oil, marked induction period to be prolonged about 18 and 20 days, respectively. But the POV in fat soluble fraction of mustard powder increased remarkably in the early stage of storage, so it did not show inhibitory effect on the oxidation of sardine oil. In the TBA value of sardine oil during storage, the water soluble fraction of onion and mustard powder were more slowly increased than other fractions. The weighing change of sardine oil, contained in the water soluble fraction of mustard powder, was slower than other fractions, marking $0.5\%$ of weight gain during 30 day storage. On the other hand water and $80\%$ ethanol soluble fractions of onion were marked $2.3\%\;and\;5.8\%$ of weight gain during 30 day storage. In the oxidative degradation of docosahexaenoic acid, water soluble fractions of mustard powder and onion extracts showed the strongest inhiditory effect.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.1
• /
• pp.88-94
• /
• 2012

One of the effective ways to reduce both $NO_x$ and PM at the same time in a diesel CI engine is to operate the engine in low temperature combustion (LTC) regimes. In general, two strategies are used to realize the LTC operation-dilution controlled LTC and late injection LTC - and in this study, the former approach was used. In the dilution controlled regime, LTC is achieved by supplying a large amount of EGR to the cylinder. The significant EGR gas increases the heat capacity of in-cylinder charge mixture while decreasing oxygen concentration of the charge, activating low temperature oxidation reaction and lowering PM and $NO_x$ emissions. However, use of high EGR levels also deteriorates combustion efficiency and engine power output. Therefore, it is widely considered to use increased intake pressure as a way to resolve this issue. In this study, the effects of intake pressure variations on performance and emission characteristics of a single cylinder diesel engine operated in LTC regimes were examined. LTC operation was achieved in less than 8% $O_2$ concentration and thus a simultaneous reduction of both PM and $NO_x$ emission was confirmed. As intake pressure increased, combustion efficiency was improved so that THC and CO emissions were decreased. A shift of the peak Soot location was also observed to lower $O_2$ concentration while $NO_x$ levels were kept nearly zero. In addition, an elevation of intake pressure enhanced engine power output as well as indicated thermal efficiency in LTC regimes. All these results suggested that LTC operation range can be extended and emissions can be further reduced by adjusting intake pressure.

• Journal of Nutrition and Health
• /
• v.53 no.2
• /
• pp.99-110
• /
• 2020

Purpose: The rice germ fraction is a better source of protein, lipid, and fiber than the rice endosperm. Furthermore, the rice germ is rich in bioactive phytochemicals such as γ-aminobutyric acid, tocopherols, tocotrienols, phytic acid, and so on. In this study, the phytosterol content and antioxidant activity of Keunnunjami germ (KG) or normal rice germ supplement were investigated in healthy adult rats. Methods: In vitro, quantitative assessment of phytosterols, including β-sitosterol, campesterol, cycloartenol, and stigmasterol, was performed. Comparative antioxidant activities of 2 rice germs were measured based on DPPH radical scavenging activity, reducing power, and ABTS radical scavenging capacity. In vivo, male Spraque-Dawley rats (30-weeks-old) were randomly assigned a diet of normal control (NC, AIN-93M diet), AIN-93M diet supplemented with normal rice germ 3% (NG3), or AIN-93M diet supplemented with KG 3% (KG3) and fed for 8 weeks. Results: KG contained significantly higher campesterol and stigmasterol contents and antioxidant activity than normal rice germ. The KG3 group exhibited significantly lower body weight gain as well as inguinal and total white adipose tissue weights. There were no significant differences in plasma glucose, insulin, C-peptide, or homeostasis model assessment of insulin resistance level among the 3 groups. The plasma tumor necrosis factor-α concentration was significantly lower while leptin, advanced oxidation protein products, and interleukin-6 showed downward trends in the KG3 group. In addition, the superoxide dismutase level of the KG3 group was significantly higher compared to the NC and NG3 groups. Conclusion: This study indicates that KG can be considered as a valuable source of phytosterol components. Lastly, KG has strong antioxidant properties and may have potential to ameliorate elevation of proinflammatory cytokine production with age.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.559-569
• /
• 2007

The purposes of this study were to find the main foulant of membrane and the optimal chemical cleaning method for MF(microfiltration) drinking water treatment system using D dam water as water source. The MF pilot plant which can treat maximum $500m^3/d$ consisted of 3 racks and was operated for 10 months under various operation conditions. After 10 months operation, $1^{st}$ and $2^{nd}$ rack of membrane pilot plant system were cleaned chemically and the degree of the restoration of the fouled membrane in terms of the pure water flux was detemnined. Inorganic compounds which contained in chemical cleaning waste was analyzed by Inductively Coupled Plasma (ICP). One membrane module for 3rd rack was disjointed and membrane fouling materials, especially inorganic compounds were investigated by Electron Probe Microanlysis (EPMA) to elucidate the reason of TMP increase. And also, the various chemical reagents (1N HCl or $H_2SO_4$, oxalic acid as acid and 0.3% NaOCl as alkali) were tested by combination of acid and alkali to determine the optimal chemical cleaning method for the MF system using micro-modules manufactured using the disjointed module. It was verified that the inside and outside of membrane module was colorized with black. As a result of the quantitative and semi-qualitative analysis of membrane foulant by ICP, most of inorganic foulant was manganese which is hard to remove by inorganic acid such as HCI. Especially, it was observed by EPMA that Mn was attached more seriously in inside surface of membrane than in outside surface of that. It was supposed that Mn fouling in inside surface of membrane might be caused by the oxidation of soluble manganese (Mn(II)) to insoluble manganese ($MnO_2$) by chlorine containing in backwashing water. The optimal cleaning method for the removal of manganese fouling was consecutive cleaning with the mixture of 1N HCl and 1% of oxalic acid, 0.3% NaOCl, and 1N HCl showing 91% of the restoration of the fouled membrane.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.858-866
• /
• 1998

Soldering is the usual method used to correct an unstable fixed partial denture framework at patient's try-in; However, presoldering base metal alloys is technique-sensitve and results are unstable because it is difficult to maintain uniform heat distribution and to prevent oxidation of an alloy. A cast-joining technique has been developed by Weiss and Munyon for repair, correction and addition to base metal framework. This joining technique eliminates the problem with presoldering of non-precious frameworks. The object of this study was to 1) compare the relative flexure strength and the joining effectiveness of Ni-Cr-Be cast in two pieces and 'pre-soldered' versus in two pieces and 'cast-joined'. 2) determine the effect of increasing the number of retentive grooves on the face of the cast and 3) determine the effect of the relative matched position of groove patterns on flexure strength. The joining effectiveness can be expressed by the ratio of the mean flexure stress of soldered or cast-joined specimens to that of one-piece cast. Resin rods 3mm in diameter were used as pattern of specimens for one-piece casted, presoldered, and cast-joined groups. Cast-joined specimens had two different patterns of retentive grooves on the joined faces. Type A had cross-shaped grooves 1mm in depth. 0.6mm in width. Type B was the same except for the addition of one more retentive groove. In the experiment connecting cast-joined specimens, half of specimens with type A pattern had their patterns on the faces of paired casts matched with each other as mirror image. With the rest pairs, it was proceeded that one of paired casts turned 45 degrees so that the patterns crossed. Half of specimens with type B pattern also had the patterns matched as mirror image; However, here, one of paired casts turned 90 degrees with the other pairs. Retentive groove in this study lacked the intentional undercuts, in contrast with the suggestion of Weiss and Munyon. The specimens were subjected to four-point flexural loading in an Instron testing machine. The midspan flexural stress was calculated at the point of initial plastic strain as determined from a strip-chart recorder or at the point of failure if this occured at a lower stress level. Within the scope of this study, the following results were obtained. 1. The presoldered group showed flexural strength at least 2 times higher than the cast-joined groups. Its joining effectiveness was 82%. 2. In cast-joined groups, the flexural strength of joints with type B patterns exhibited 1.5 times that of joints with type A patterns. Joining effectivenesses were 38% for type B patterns, 25-26% for type A patterns. 3. The relative matched position of groove patterns did not have any significant effect on flexural strength of the cast-joined specimens with either type A patterns or type B patterns(p>.05).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.10 no.1
• /
• pp.17-22
• /
• 1977

In the present paper, the effect of sodium sulfite treatment on tile inhibition of browning reactions occurring in the storage of dried oyster was tested and the supplementary effect of antioxidantsaddedwasalsomentioned. Dried oysters treated with sodium sulfite solutions as described in the previous paper(Lee and Choi, 1977) were stored in the bottles with silica gel bags at room temperature with or without the application of antioxidants. The ethanol solution of an antioxidant mixture(BHA, BHT, plus, synergists) was sprayed on the surface of cooked oyster before drying. The density of brown pigment was determined spectrophotometrically by measuring the absorbance at 420 and 440 nm of both fractions of pigment extract, namely chloroform-methanol and water soluble fractions, which represent the brown color developed by fat oxidation and Maillard reactions respectively. TBA value was also measured for the oxidative rancidity in oysters during the storage. It appeared from the results that the 0.5 M sodium sulfite-60minute treated samples showed better effect after 150 day storage at room temperature. Controlling tile pH of treating solutions, did not reveal so much different in inhibitory effect in the aspect of color but a more reduction of tyrosine and reducing sugar was resulted with acidic solution than with alkaline solution. The development of brown color in dried oyster seemed to be leaded rather by the oxidative rancidity of lipids than sugar-amino reactions particularly in a long-term storage since the browning of chloroform-methanol fraction progressed more rapidly than of water. soluble fraction. The application of antioxidant, therefore, could largely retard the browning of the product as appeared in the results that sodium sulfite treated oyster with addition of antioxidant kept the best color during the storage.

• Food Science and Preservation
• /
• v.7 no.3
• /
• pp.331-336
• /
• 2000

The phenolic compounds of Korean sweet potatoes, Mokpo 18 and Yulmi, were extracted by using 70%-methanol and the extracts(ME) were fractionated and obtained three fractions such as free phenolic acid(FPAF), soluble phenolic acid ester(SPAF) and insoluble bound phenolic acid(BPAF) fractions. The antioxidative activities(AA) was represented as the peroxide values(POVs). The POVs were calculated by measuring the oxidation of linoleic acid and lard emulsions at $60^{\circ}C$. AA of FPAF has shown the most effective. AA of FPAF were more effective than those of ME in both Yulmi and Mokpo 18. AA of the ME of Mokpo 18 were more effective than those of Yulmi, however, those of FPAF in Ulmi were more effective than in Mokpo 18. The POVs of ME and FPAF of the peel part in both sweet potatoes were more effective than those of peeled part. The qualitative and quantitative analysis of the phenolic compounds in both sweet-potatoes were performed by using high performance liquid chromatography(HPLC) and the major phenolic compounds were identified as chlorogenic acid and caffeic acid. The contents of caffeic acid were 0.684mg/g in the peel part and 0.028mg/g in the peeled part of Yulmi and 0.472mg/g in the peel part and 0.046mg/g in the peeled part of Mokpo 18 and those of chlorogenic acid was 0.674mg/g, 0.926mg/g, and 0.012mg/g, respectively. In comparative test of antioxidative activities between a standard chlorogenic acid and caffeic acid, AA of caffeic acid were more effective than those of chlorogenic acid.

• Economic and Environmental Geology
• /
• v.40 no.3 s.184
• /
• pp.277-293
• /
• 2007

Seasonal and spatial variations in the concentrations of trace elements, pH and Eh were found in a creek watershed affected by mine drainage and leachate from several waste rock dumps within the As-Pb-rich Indae mine site. Because of mining activity dating back to about 40 years ago and rupture of the waste rock dumps, this creek was heavily contaminated. Due to the influx of leachate and mine drainage, the water quality of upstream reach in this creek was characterized by largest seasonal and spatial variations in concentrations of Zn(up to $5.830 mg/{\ell}$), Cu(up to $1.333 mg/{\ell}$), Cd(up to $0.031 mg/{\ell}$) and $SO_4^{2-}$(up to $173 mg/{\ell}$), relatively acidic pH values (3.8-5.1) and highly oxidized condition. The most abundant metals in the leachate samples were in order of Zn($0.045-13.909 mg/{\ell}$), Fe($0.017-8.730mg/{\ell}$), Cu($0.010-4.154mg/{\ell}$) and Cd($n.d.-0.077mg/{\ell}$), with low pH(3.1-6.1), and high $SO_4^{2-}$(up to $310 mg/{\ell}$). The mine drainage also contained high concentrations of Zn, Cu, Cd and $SO_4^{2-}$ and remained constantly near-neutral pH values(6.5-7.0) in all the year. While the leachate and mine drainage might not affect short-term fluctuations in flow, it may significantly influence the concentrations of chemicals in the stream. The abundance and chemistry of Fe-(oxy)hydroxide within this creek indicated that the Fe-(oxy)hydroxide formation could be responsible for some removal of trace elements from the creek waters. Spatial and seasonal variations along down-stream reach of this creek were caused largely by the influx of water from uncontaminated tributaries. In addition, the trace metal concentrations in this creek have been decreased nearly down to the background level at a short distance from the discharge points without any artificial treatments after hydrologic mixing in a tributary. The nonconservative(i.e. precipitation, adsorption, oxidation, dissolution etc.) and conservative(hydrologic mixing) reactions constituted an efficient mechanism of natural attenuation which reduces considerably the transference of trace elements to rivers.

• Resources Recycling
• /
• v.16 no.3 s.77
• /
• pp.19-26
• /
• 2007

The bottom ash of municipal solid waste incineration generated during incineration of municipal solid waste in metropolitan area consists of ceramics, glasses, ferrous materials, combustible materials and food waste and so on. Although the ferrous material was separated by the magnetic separation before the incineration process, of which content accounts for about $3{\sim}11%$ in bottom ash. The formation of a $Fe_3O_4-Fe_2O_3$ double layer(similar to pure Fe) on the iron surface was found during air-annealing in the incinerator at $1000^{\circ}C$. A strong thermal shock, such as that takes place during water-cooling of bottom ash, leads to the breakdown of this oxidation layer, facilitating the degradation of ferrous metals and the formation of corrosion products and it existed as $Fe_2O_3,\;Fe_3O_4\;and\;FeS_2$. So, many problems could occur in the use of bottom ash as an aggregate substitutes in construction field. Therefore, in this study, the separation of ferrous materials from municipal solid waste incineration bottom ash was investigated. In the result, the ferrous product(such as $Fe_2O_3,\;Fe_3O_4,\;FeS_2$ and iron) by magnetic separator at 3800 gauss per total bottom ash(w/w.%) accounted for about 18.7%, and 87.7% of the ferrous product was in the size over 1.18 mm. Also the iron per total bottom ash accounted for about 3.8% and the majority of it was in the size over 1.18 mm.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.92-100
• /
• 2016

Low-temperature conversion of nitrogen oxides using plasma-assisted hydrocarbon selective catalytic reduction of (HC-SCR) was investigated. Plasma was created in the catalyst-packed bed so that it could directly interact with the catalyst. The effect of the reaction temperature, the shape of catalyst, the concentration of n-heptane as a reducing agent, the oxygen content, the water vapor content and the energy density on $NO_x$ removal was examined. $NO_x$ conversion efficiencies achieved with the plasma-catalytic hybrid process at a temperature of $250^{\circ}C$ and an specific energy input (SIE) of $42J\;L^{-1}$ were 83% and 69% for one-dimensional Ag catalyst ($Ag\;(nanowire)/{\gamma}-Al_2O_3$) and spherical Ag catalyst ($Ag\;(sphere)/{\gamma}-Al_2O_3$), respectively, whereas that obtained with the catalyst-alone was considerably lower (about 30%) even with $Ag\;(nanowire)/{\gamma}-Al_2O_3$ under the same condition. The enhanced catalytic activity towards $NO_x$ conversion in the presence of plasma can be explained by the formation of more reactive $NO_2$ species and partially oxidized hydrocarbon intermediates from the oxidation of NO and n-heptane under plasma discharge. Increasing the SIE tended to improve $NO_x$ conversion efficiency, and so did the increase in the n-heptane concentration; however, a further increase in the n-heptane concentration beyond $C_1/NO_x$ ratio of 5 did not improve the $NO_x$ conversion efficiency any more. The increase in the humidity affected negatively the $NO_x$ conversion efficiency, resulting in lowering the $NO_x$ conversion efficiency at the higher water vapor content, because water molecules competed with $NO_x$ species for the same active site. The $NO_x$ conversion efficiency increased with increasing the oxygen content from 3 to 15%, in particular at low SIE values, because the formation of $NO_2$ and partially oxidized hydrocarbon intermediates was facilitated.