• Title/Summary/Keyword: $R_max$

Search Result 925, Processing Time 0.032 seconds

Effects of Particle Size Distribution on The Magnetic Properties of Hexagonal Sr-Ferrite (육방정 Si-폐라이트의 자기적 특성에 미치는 입도 분포의 영향)

  • Song, Chang-Yul;Shin, Yong-Deok
    • Proceedings of the KIEE Conference
    • /
    • 1994.07b
    • /
    • pp.1314-1316
    • /
    • 1994
  • $0.36[wtx]Sio_2$ and $0.1[wtx]H_3BO_3$ were added to strontium ferrite magnets of the magnetoplumbite phase SrO $5.7Fe_2O_3$. This experiment was carried out to investigate the effects of particle size distribution as a function of milling time(20,30,40,50,60,70 hours) on the magnetic properties of SrO $5.7Fe_2O_3$ ferrite magnet. The B-H Curve, density and the degree of orientation were measured. The optimal conditions of making magnets and properties of a typical sample are the following : The milling time was 60 hours. Magnetic and physical properties are $B_r$=4000[G], $_BH_c$=3330[Oe], $_IH_c$=3525[Oe], (BH)max=3.786 [MGOe], density= $5.0063g/cm^2$, orientation factor f=0.813.

  • PDF

Analytical Coexistence Benchmark for Assessing the Utmost Interference Tolerated by IEEE 802.20

  • Abdulla, Mouhamed;Shayan, Yousef R.
    • Journal of Information Processing Systems
    • /
    • v.7 no.1
    • /
    • pp.43-52
    • /
    • 2011
  • Whether it is crosstalk, harmonics, or in-band operation of wireless technologies, interference between a reference system and a host of offenders is virtually unavoidable. In past contributions, a benchmark has been established and considered for coexistence analysis with a number of technologies including FWA, UMTS, and WiMAX. However, the previously presented model does not take into account the mobility factor of the reference node in addition to a number of interdependent requirements regarding the link direction, channel state, data rate and system factors; hence limiting its applicability for the MBWA (IEEE 802.20) standard. Thus, over diverse modes, in this correspondence we analytically derived the greatest aggregate interference level tolerated for high-fidelity transmission tailored specifically for the MBWA standard. Our results, in the form of benchmark indicators, should be of particular interest to peers analyzing and researching RF coexistence scenarios with this new protocol.

Production, Isolation, and Purification of L-Asparaginase from Pseudomonas Aeruginosa 50071 Using Solid-state Fermentation

  • El-Bessoumy, Ashraf A.;Sarhan, Mohamed;Mansour, Jehan
    • BMB Reports
    • /
    • v.37 no.4
    • /
    • pp.387-393
    • /
    • 2004
  • The L-asparaginase (E. C. 3. 5. 1. 1) enzyme was purified to homogeneity from Pseudomonas aeruginosa 50071 cells that were grown on solid-state fermentation. Different purification steps (including ammonium sulfate fractionation followed by separation on Sephadex G-100 gel filtration and CM-Sephadex C50) were applied to the crude culture filtrate to obtain a pure enzyme preparation. The enzyme was purified 106-fold and showed a final specific activity of 1900 IU/mg with a 43% yield. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) of the purified enzyme revealed it was one peptide chain with $M_r$ of 160 kDa. A Lineweaver-Burk analysis showed a $K_m$ value of 0.147 mM and $V_{max}$ of 35.7 IU. The enzyme showed maximum activity at pH 9 when incubated at $37^{\circ}C$ for 30 min. The amino acid composition of the purified enzyme was also determined.

Optimal Grinding Condition of $ZrO_2$, Ferrule for Optical Fiber Connector Using the Taguchi Method (다구찌 실험 계획법을 이용한 광통신용 지르코니아($ZrO_2$)페룰의 연삭조건 최적화 실험)

  • Kim, Jong-Hyong;Suh, Chang-Min;Chae, Jung-Sik
    • Proceedings of the KSME Conference
    • /
    • 2004.04a
    • /
    • pp.993-998
    • /
    • 2004
  • In this paper, the effects of grinding conditions on the surface roughness of $ZrO_2$ ferrule applying to the optical fiber connector were investigated. The mesh number of grindstone, the grinding speed and the time schedule during grinding were regarded as main cutting parameters that have an effect on the surface roughness. And then, optimal combinations for chamfering grinding were obtained by using the Taguchi method. In addition, analytic values for maximum surface roughness ($R_{max}$) estimated by the theoretical equations which were derived from the formative model of surface roughness on the chamfering grinding were compared with those of the experiments.

  • PDF

A Study on the Standardization for the Technology of Mobile 3D API (모바일 3D API 기술 표준화 연구)

  • Lee, B.R.;Ryu, S.W.;Lee, E.J.;Park, J.H.
    • Electronics and Telecommunications Trends
    • /
    • v.20 no.4 s.94
    • /
    • pp.110-119
    • /
    • 2005
  • 본 고에서는 모바일 3D 그래픽스 기술에 대한 국내외 표준화 연구 활동과 표준화 발전전망에 관하여 기술하고 있다. 모바일 3D API 표준으로는 국제사실표준으로서 크로노스 그룹에서 OpenGL|ES를 제안하고 있어 국내에 많은 모바일 3D 콘텐츠 개발사에서 채택하고 있으며, 자바진영의 M3G(JSR-184) 표준은 응용 콘텐트에 사용하는 상위레벨의 API를 규정하고 있다. 국내에는 모바일 3D 표준화 포럼을 중심으로 MPEG-4SNHC의 3D 압축 프로파일 제안을 위한 TFT 활동과 국내 모바일 3D API 표준을 위한 TFT를 운영하며, 그 결과를 바탕으로 국제 표준화 활동 및 크로노스 그룹과의 긴밀한 협력을 진행하고 있다. 모바일 3D 표준화의 향후 전망으로는 프로그래머블 그래픽 파이프라인에 대한 API의 표준화와 데이터의 압축을 포함한 모바일 게임 데이터 포맷의 표준화, 모바일 3D 그래픽 API를 기반으로 한 상위 수준의 애니메이션, 3D 콘텐츠 제작에 필요한 API에 대한 표준화 및 미디어 프로세싱의 표준화 일환으로 진행되는 크로노스 그룹의 OpenMAX의 표준화 등이 활발하게 이루어질 것이다.

Development of High Frequency Active Filter for Multimedia (멀티미디어용 고주파 Active Filter개발에 관한 연구)

  • 윤종남
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.9 no.1
    • /
    • pp.1-7
    • /
    • 2002
  • The purpose of this work is to develop High-Frequency Active Filter and super-miniaturation technology(SMD Type) of Filter which are essential for the key R/F Microwave components in the Mobile telecommunication system. The cut-off frequency of high frequency active filter for multimedia is 2.5 MHz, the gain is 0.5dB at 100 kHz, the passband ripple is 1.2 dB max at 100 kHz~2.0 kHz, GDT is 60 nsec at 100 kHz-2.0 MHz, the attenuation is 40 dB min at 3.75 MHz.

  • PDF

Magnetic properties of high performance NdFeB perpendicular thin film (고성능 NdFeB 수직 박막자석의 자기적 특성)

  • 김만중;양재호;김윤배;김택기
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.07a
    • /
    • pp.802-805
    • /
    • 2000
  • Anistropic [Ta/NdFeB/Ta] thin film was sputtered on heated Si substrate by Nd$\_$17/Fe$\_$74/B$\_$9/ target. The grain size of the films increased according to the increase of substrate temperature, and the film deposited at 650$^{\circ}C$ showed optimum coercivity. 4$\pi$M$\_$r/, $\_$i/H$\_$c/ and (BH)$\_$max/ measured perpendicular to the film plane of thin film deposited at 650$^{\circ}C$ are 12.3 kG, 9.9 kOe and 37 MGOe, respectivly.

  • PDF

Character for Spatial Distribution of Velocity Using Simple Hydraulic Data (기본적인 수리학적 자료에 의한 유속의 공간적 분포 특성)

  • Koh, Deuk-Koo;Choo, Tai-Ho
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.8 no.6
    • /
    • pp.1560-1565
    • /
    • 2007
  • In this study, Chiu's velocity distribution equation recently developed from the probability and entropy concepts is used to establish a linkage between the mean velocity obtained from the Manning's equation and the corresponding velocity distribution in a channel cross section. The linkage to be established enables computing the velocity distribution along with the mean velocity, from simple hydraulic data such as Manning's n, hydraulic radius and channel slope irrespective of including sediment or not.

  • PDF

정보통신 표준 및 시험 인증 체계의 선진화를 위한 과제와 전략

  • Kim, Won-Sik
    • Information and Communications Magazine
    • /
    • v.25 no.1
    • /
    • pp.59-63
    • /
    • 2008
  • 2007년 10월 18일, 우리의 와이브로 기술이 ITU-R-RA-07 회의에서 OFDMA TDD WMAN이란 이름으로 IMT-2000 국제표준 중 여섯 번째 표준으로 채택되었다. 아울러 해당 주파수($2.3{\sim}2.4GHz$)가 4G 이동통신 공통대역으로 선정됨으로써 우리나라 기술이 세계로 진출할 수 있는 교두보를 마련하였다. 그에 앞서 TTA는 2006년 7월에 세계에서 두 번째로 WiMAX포럼 국제공인 인증시험소로 지정되어 내년 초부터 공식 시험인증 서비스를 시작할 예정이다. 이는 제품이 시장에 출시되기 전에 공인인증시험소를 통한 적합성 시험과 상호운용성 시험을 권고하고 있기에 국내 WiMAX 산업의 국제 경쟁력 강화를 위해 TTA와 정부, 사업자 및 장비업체들과의 공동 노력으로 이뤄낸 결과이다. 이렇듯 표준화의 중요성과 시험인증의 필요성이 날로 커져가고 있음에 본 고에서는 TTA의 표준/시험인증 현황 및 향후 추진전략에 대해 살펴보고자 한다.

The Design of Monitor Program for MC68000 Based System (MC68000 시스템을 위한 모니터 프로그램 설계)

  • Lee, B.R.;Chung, C.H.
    • Proceedings of the KIEE Conference
    • /
    • 1993.07a
    • /
    • pp.507-509
    • /
    • 1993
  • The monitor program, which controls overall operation of MC68000 based system and executes some commands and I/O operations, is a system program and consists of functions that executes these operations. Monitor program can be easily applied to design a digital filter. This paper approaches to the object, to which refer above, by considerng algorithm of monitor program, which operates in M68000 based system, and concerning theory. This monitor program operate by the serial communication between host IBM-PC and target MC68000 system with MC6850 and MAX232C.

  • PDF