• Proceedings of the Korean Statistical Society Conference
• /
• 2005.05a
• /
• pp.227-231
• /
• 2005

민감한 모집단의 모수 추정 방법으로 확률화응답기법과 무응답을 고려한 직접조사 방법의 효율성을 비교 분석하였다.

• Journal of computational fluids engineering
• /
• v.16 no.2
• /
• pp.81-87
• /
• 2011

The importance of shear thinning non-Newtonian blood rheology on the hemodynamic characteristics of idealized cerebral saccular aneurysms were investigated by carrying out CFD simulations assuming two different non-Newtonian rheology models (Carreau and Ballyk models). To explore effects of vessel curvature, a straight and a curved vessel geometry were considered. The wall shear stress(WSS), relative residence time(RRT) and velocity distribution were compared at the different phases of cardiac cycle. As expected, blood entered the aneurysm at the distal neck and created large vortex in both aneurysms, but with higher momentum on the curved vessel. Hemodynamic characteristics such as WSS, and RRT exhibited only minor effects by choice of different rheological models although Ballyk model produced relatively higher effects. We conclude that the assumption of Newtonian fluid is reasonable for studies aimed at quantifying the hemodynamic characteristics, in particular, WSS-based parameters, considering the current accuracy level of medical image of cerebral aneurysm.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.126-128
• /
• 2014

디지털 방송기술의 비약적인 발전으로 기존 HD(High Definition) 화질의 4~16배까지 지원 가능한 UHD(Ultra High Definition) 방송 서비스가 제공되는 새로운 시대를 맞이하게 되었다. UHD 방송은 초고선명 비디오와 22.2 채널 오디오 서비스가 가능한 차세대 실감방송 기술이다. 이러한 UHD 서비스를 제공하기 위해서는 고압축 영상 코덱 기술인 HEVC(High Efficiency Video Coding), OFDM(Othogonal Frequency Division Multiplexing) 기반 대용량 전송기술과 다양한 멀티미디어 부가서비스 가능한 전송 프로토콜이 필수적으로 요구된다. 최근 UHD 방송 전송 프로토콜로 표준화 추진 중인 MMT(MPEG Media Transport)는 이기종망에서 적용할 수 있으며, 양방향 전환이 가능하여 시청자의 요구사항을 실시간으로 반영할 수 있다는 장점을 지닌다. 한편, 지상파 UHD 방송 서비스를 빠르고 효과적으로 수신하기 위해 필요한 정보인 NIT(Network Information Table), RRT(Rating Region Table) 및 SDT(Service Description Table)가 MMT 시그널링 프로토콜에서는 포함되어 있지 않다. 따라서 본 논문에서는 지상파 UHD 방송 서비스의 효과적 수신이 가능한 MMT 기반 지상파 UHD 방송을 위해 NIT, RRT 및 SDT 정보가 포함된 서비스 시그널링 구조을 제안한다.

• The Korean Journal of Applied Statistics
• /
• v.19 no.1
• /
• pp.69-80
• /
• 2006

In this study, we make an effort to find a method to acquire sensitive information when sensitive populations are consisted of several clusters that vary in size. We suggest and systemize the theoretical validity for applying RRT(Randomized Response Technique) to PPS(Probability Proportional to Size) sampling method and derive the estimate and it's variance of the proportion of sensitive characteristic of population by using the suggested method. We compare the efficiency of the suggested technique by two-stage equal probability sampling. We examine practical aspects of the suggested method of RRT by PPS sampling through field survey.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.317-333
• /
• 2007

The Round-Robin Test (RRT) for ground response analysis was performed by Division of Geotechnical Earthquake Engineering of Korean Geotechnical Society. This research analyzed the influence of analysis methods on variation of ground response by using the results of this RRT. The analysis methods include equivalent linear analysis, non-linear analysis and effective stress analysis. A total of 5 teams among 12 teams applied two kinds of analysis methods. This research compared the results of these 5 teams and analyzed the variation of the results according to analysis methods. The compared results were shear stress-shear strain relation, transfer function, time history and the response spectrum of ground surface acceleration, peak ground acceleration, peak shear strain and maximum excess pore pressure ratio.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2007.09a
• /
• pp.259-265
• /
• 2007

The technical committee of Soil Dynamics and Geotechnical Earthquake Engineering of Korean Geotechnical Socity has conducted Round Robin Test(RRT) on seismic ground response analyses in 2007. Total 14 participating teams were given exact same soil information of three sites and three input ground motions including two recorded ground motions and one synthetic ground motion. Each team selected its own analysis method and approaches to perform ground response analyses. There were equivalent linear, nonlinear total stress, and nonlinear effective stress approaches, which could be selected. The results from RRT were systematically analyzed and dispersion and variation due to analysis methods, input ground motions, shear velocity profiles, shear modulus reduction curves, damping curves, and other input data are reported by the companion papers.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.2
• /
• pp.20-24
• /
• 2015

During refueling Outage, In-service inspections(ISIs) for the Nuclear Power Plant components are mandatory requirement in accordance with ASME Code Sec. XI. Especially, in current ultrasonic testing is one of the most important NDT techniques that are used for volumetric examination methods for nuclear power plant components, and accurate sizing of flaw indication by UT is essential to assure the integrity of the components. However, ASME code specifies minimum requirement for vessel examination procedure, and so far many different flaw sizing approaches have been tried to apply. Through the Round Robin Test(RRT), the accuracy of ultrasonic flaw sizing using DAC techniques was measured with the mock-ups simulating typical pressure vessel welds. These mock-ups contain artificially introduced flaws of known size and location. This paper shows experimental comparison data on the accuracy of techniques using such as 6dB drop, 50%DAC, 20%DAC and 20%DAC with beam spread correction, and also shows that diverse DAC techniques can be effectively applied to the assessment of the flaw sizing for pressure vessel welds in the stage of welding and fabrication.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.231-236
• /
• 2005

Calibration capability was evaluated using the reference-grade platinum resistance thermometer (PRT) in the temperature range of $-50^{\circ}C$ to $250^{\circ}C$ for the national calibration centers. The reference-grade PRT was calibrated at the several fixed points, which was composed by the freezing points of Sn, In, the melting point of Ga and the triple point of water and Hg, before and after the round-robin test (RRT) experiments. The temperature scale of reference-grade PRT was compared to the local standard PRT's using the system of the national calibration centers. $E_{n}$ values was calculated by the temperature difference between the reference-grade PRT and the local standard PRT, and the best measurement capability. Finally, the capability of the national calibration centers was evaluated by the $E_{n}$ values.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.94-96
• /
• 2021

In this paper, we develop a new navigation algorithm for industrial mobile robots to arrive at the destination in unknown environment. To achieve this, we suggest a navigation algorithm that combines Dynamic Window Approach (DWA) and Dijkstra path planning algorithm. We compare Local Dynamic Window Approach (LDWA), Global Dynamic Window Approach(GDWA), Rapidly-exploring Random Tree (RRT) Algorithm. The navigation algorithm using Dijkstra algorithm combined with LDWA and GDWA makes mobile robots to reach the destination. and obstacles faced during the path planning process of LDWA and GDWA. Then, we compare on time taken to arrive at the destination, obstacle avoidance and computation complexity of each algorithm. To overcome the limitation, we seek ways to use the optimized navigation algorithm for industrial use.

• Analytical Science and Technology
• /
• v.22 no.1
• /
• pp.82-91
• /
• 2009

Preparation and evaluation of the limestone samples for a proficiency test using domestic limestone have been performed. We have used statistical method for evaluation of the XRF and instrumental analysis results. We have found that there were some outliers from XRF and ICP-OES instrumental analysis results for each sample. After removal of 5 outliers among the 50 samples we could obtain the homogeneous samples which have within a reliability of 95% from a statistical analysis result.