• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.742-749
• /
• 2002

R. F. magnetron sputtering법을 이용하여 Pt/Ti/$SiO_2$/Si 기판 위에 $Pb_{1.1}Zr_{0.53}Ti_{0.47}O_3$ target을 사용하여 박막을 제조하였다. Interlayer(PbO, $TiO_2$, PbO/$TiO_2$)층을 삽입함으로써 박막의 결정성을 향상시켰고, 박막의 기판온도도 상당히 낮출 수 있었다. 순수한 PZT에 비하여 interlayer를 삽입한 PZT는 높은 유전상수과 낮은 유전손실 및 높은 누설전류를 가지는 우수한 전기적 특성을 나타내었다. 이러한 PZT 박막과 interlayer 층은 증착온도에서 서로 반응하여 하나의 고용체를 이루지 않고, 각각 독립적인 층으로 존재함을 XPS 분석을 통해 확인하였다. 여러 interlayer중 특히 PbO/$TiO_2$는 우수한 유전특성(${\varepsilon}_r$=414.94, tan${\delta}$=0.0241, Pr=22${\mu}C/cm^2$)을 나타내었고 가장 효과적인 seed로써의 역할을 하였다.

• 한국진공학회지
• /
• 제16권6호
• /
• pp.446-452
• /
• 2007

R.F. magnetron-sputtering 방법에 의해 $(Pb_{1.1},La_{0.08})(Zr_{0.65}.Ti_{0.35})O_3$ 박막을 $Pt/Ti/SiO_2/Si$, $TiO_2(interlayer)/Pt/Ti/SiO_2/Si$ 기판에 증착하고, $TiO_2$ interlayer에 의한 PLZT 박막의 특성을 고찰 하였다. $TiO_2$ interlayer의 증착조건을 변화시켜가며 단일상의 anatase 상과 rutile 상을 증착하였고, 그 위에 증착시킨 PLZT 박막의결정성을 x-ray diffraction(XRD)을 통해 분석하였다. 또한 $TiO_2$ interlayer에 의한 $PLZT-TiO_2$, $TiO_2-Pt$ 박막의 계면상태를 고찰하기 위해 glow discharge spectrometer(GDS) 분석을 행하였고, PLZT의 강유전 특성을 고찰하기 위해 전기적 측정을 행하였다. $TiO_2$ anatase 단일 상에 증착한 PLZT의 경우 (110) 방향으로 우선 배향됨을 알 수 있었고, 12.6 ${\mu}C/cm^2$의 잔류분극 값을 나타내었다.

• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.33-36
• /
• 1986

The $PbTiO_3$is well known materials having remarkable ferroelectric piezoelectric and pyro-electric properties. Thin films of the lead titanite has been successfully fabricated by Chemical Vapor Deposition on the borosilicate glass and titanium substrate. The $PbTiO_3$ thin film deposited on the borosilicate glass using the $PbCl_2$, $TiCl_4$ dry oxygen and wet oxygen at different temperatures (50$0^{\circ}C$-$700^{\circ}C$) grows along the (001) preferred orientation. On the other hand the $PbTiO_3$ thin film deposited on the titanium substrate using the PbO grows along the (101) preferred orientation. Growth orientation of deposited $PbTiO_3$ depends on the reaction species irrespective of substrate materials. Maximum dielectic constant and loss tangent of the $PbTiO_3$ thin film deposited on the titanium substrate are about 90 and 0.02 respectively, . Deposition rates of $PbTiO_3$ deposited on the borosilicate glass and titanium substrate are 10-15 ${\mu}{\textrm}{m}$/hr. Titanium dioxide interlayer formed be-tween $PbTiO_3$ film and titanium substrate material, It improved the adhesion of the film.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.169-170
• /
• 2008

The heterolayered PZT/PT thick films were fabricated by two different methods - thick films of the PZT by screen printing method on alumina substrates electrodes with Pt, thin films of $PbTiO_3$ by the spin coating method on the PZT thick films and once more thick films of the PZT by the screen printing method on the $BaTiO_3$ layer The structural and the dielectric properties were investigated for effect of various stacking sequence of sol-gel prepared $PbTiO_3$ coating solution at interface of the PZT thick films. The insertion of $PbTiO_3$ interlayer yielded the PZT thick films with homogeneous and dense grain structure with the number of $PbTiO_3$ layers. The leakage current density of the PZT/$PbTiO_3-1$ film is less that $4.41{\times}10^{-9}\;A/cm^2$ at 5 V.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.36.4-36.4
• /
• 2004

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.594-597
• /
• 2003

In the present study, the piezoelectricity and polarization of multilayer ceramic actuator, being designed to stack PMN-PZ-PT ceramic layers and Ag-Pd electrode layers alternatively, were investigated under a consideration of geometric factor, the volume ratio of the ceramic to the electrode layers. The actuators were fabricated by tape casting of 0.2Pb(Mg1/3Nb2/3)O3-0.38PbZrO3-0.42PbTiO3 followed by lamination and burnout & co-firing processes. The actuators of 10 10 0.62 nm3 in size were formed in a way that 60 200 m thick ceramics were stacked alternatively with 5 m thick electrode layer. Increases in polarization and electric field-induced displacement with thickness of the ceramic layer were attributed to change of 90o/180o domain ratio, which was affected by interlayer internal stress. The piezoelectricity and actuation behaviors were found to depend upon the volume ratio (or thickness ratio) of ceramic to electrode layers.

• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1408-1416
• /
• 1995

Microstructure and ferroelectric properties of sol-gel derived PZT(52/48) and PT interlayered PZT(52/48) thin films on Pt/Ti/SiO2/Si substrates were investigated. Films were fabricated using Acetylacetone chelated PT and PZT(52/48) sols. PZT(52/48) thin films annealed at $700^{\circ}C$ for 20 min showed the rosette structure with the size of 1.2~1.6${\mu}{\textrm}{m}$ and the pyrochlore phse was contained. PT interlayered PZT thin films, which is inserted by PbTiO3 thin layer with the thickness of 130 $\AA$ between PZT thin film and electrode, consisted of a single perovskite phase after annealing above 55$0^{\circ}C$. They exhibited the uniform and columnar grains of 0.1~0.16${\mu}{\textrm}{m}$, which are applicable for microelectronic device including non-volatile memory. Typical P-E hysteresis loops could be obtained from PT interlayered PZT thin film at as low as the annealing temperature of 50$0^{\circ}C$. Ferroelectric properties of PT interlayered PZT thin films were improved as increasing annealing temperature up to $700^{\circ}C$, and then deteriorated at 75$0^{\circ}C$. PZT(52/48) and PT interlayered PZT(52/48) thin film annealed at $700^{\circ}C$ for 20 min displayed Ps=38.8$\mu$C/$\textrm{cm}^2$, Pr=10.0$\mu$C/$\textrm{cm}^2$, Ec=65.3 kV/cm and Ps=28.5$\mu$C/$\textrm{cm}^2$, Pr=9.8$\mu$C/$\textrm{cm}^2$, Ec=76.1 kV/cm, respectively.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2003년도 추계학술대회 발표 논문집
• /
• pp.163-168
• /
• 2003

In the present study, the piezoelectricity and polarization of multilayer ceramic actuator, being designed to stack PMN-PZ-PT ceramic layers and Ag-Pd electrode layers alternatively, were investigated under a consideration of geometric factor, the volume ratio of the ceramic to the electrode layers. The actuators were fabricated by tape casting of $0.2Pb(Mg_{1/3}Nb_{2/3)O_3-0.38PbZrO_3-0,42PbTiO_3$ followed by lamination and burnout & co-firing processes. The actuators of $10\times10\times0.6~2\textrm{mm}^3$ in size were formed in a way that $60 ~ 200\mu\textrm{m}$ thick were stacked alternatively with $5\mu\textrm{m}$ thick electrode layer. Increases in polarization and electric field-induced displacement with thickness of the ceramic layer were attributed to change of $90^{\circ}$/$180^{\circ}$ domain ratio, which was affected by interlayer internal stress. The piezoelectricity and actuation behaviors were found to depend upon the volume ratio (or thickness ratio) of ceramic to electrode layers.

• 한국재료학회지
• /
• 제1권2호
• /
• pp.105-112
• /
• 1991

압전 actuator를 위한 새로운 형태의 재료를 개발하여, 그 특성들을 조사하였다. 이 압전 actuator는 세 층으로 구성되어 있다: 압전 세라믹 층, 조성이 점차로 변하는 중간층, 그리고 또 다른 압전 세라믹 층, 이러한 형태이 재료는 경사 기능 재료(Functionally Gradient Material, FGM)라 불리운다. 경사 기능 재료를 제작하기 위한 재료설계의 개념을 도입하여, FGM화에 있어서 열팽창에 의한 시편의 박리를 막기 위해 $(Pb,\;La)(Zr,\;Ti)O_3$계에서 서로 다른 세라믹스의 조성을 선택하였다. $1300^{\circ}C$, 2시간의 소성에 의해 경사 기능화된 PLZT는 약 $20\mu\textrm{m}$정도의 중간층을 형성하는 미세구조를 가지고 있었다. 경사 기능 재료에서의 유전 및 압전 등의 여러 특성은 두 접합 조성층 특성의 사이의 값을 나타내었다. 인가 전압에 따른 strain특성은 전반적으로 단일 시편의 특성보다 증가하였으며, 특히 접합 조성층에서 고압전-저유전성 조성과 저압전-고유전성 조성을 경사 기능화하였을 경우에 변위의 증가 정도가 더욱 향상되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.615-618
• /
• 2004

The piezoelectricity and polarization of multilayer ceramic actuators, being designed to stack ceramic layer and electrode layer alternately, were investigated under a consideration of geometry, the thickness ratio of the ceramic layer to electrode layer The actuators were fabricated by tape-casting of $0.42PbTiO_3-0.38PbZrO_3-0.2Pb(Mn_{1/3}Nb_{2/3})O_3$ followed by laminating, burn-out and co-firing process. The actuators of $5\times5mm^2$ in area were formed in a way that $60{\sim}200{\mu}m$ thick ceramics were stacked 10 times alternately with $5{\mu}m$ thick electrode. Increase in polarization and electric field-displacement with increasing thickness ratio of the ceramic/electrode layer and thickness/cross section ratio were attributed to the change of $non-180^{\circ}/180^{\circ}$ domain ratio which was affected by the interlayer internal stress and Poisson ratio of ceramic layer. The piezoelectricity and actuation behaviors were found to be dependent upon the volume ratio (or thickness ratio) of ceramic layer relative to ceramic layer. Concerning with the existence of internal stress, the field-induced polarization and deformation were described in the multilayer actuator.