• International Journal of Internet, Broadcasting and Communication
• /
• 제7권1호
• /
• pp.75-92
• /
• 2015

This paper presents the application of the bond valence method to estimate the valence charge distribution in several perovskite systems: $La_{{\tilde{1}}x}Pb_xMnO_3$ (x=0.1-0.5), $La_{0.6}Sr_{0.{\tilde{4}}x}Ti_xMnO_3$ (x=0.0-0.25) and $La_{{\tilde{1}}x}Sr_xCoO_3$ (x=0.1-0.5); the reviewing of their crystal structures is also incorporated. The results showed the failure of the elastic bonding mechanism in all studied systems and revealed the general deficit of the valence charge in their unit cells. This valence deficit was not associated with the structural defects and was not equally localized in all coordination spheres. As the content of substitution increased, the charge deficit declined systematically from balanced level, signifying the transfer of valence charge from the ${\tilde{B}}O_6$ to ${\tilde{A}}O_{12}$ spheres. This transfer depended on the valence deviation of spheres and the average reached near 2 electron per unit cell. The possible impact of the limitted accuracy of the available structural data on the bond valence results has also been considered.

• Corrosion Science and Technology
• /
• 제6권6호
• /
• pp.316-321
• /
• 2007

The effect of annealing on the pitting corrosion resistance of anodized Al-Mg alloy (AA5052) processed by equal-channel angular pressing (ECAP) was investigated by electrochemical techniques in a solution containing 0.2 mol/L of $AlCl_3$ and also by surface analysis. The Al-Mg alloy was annealed at a fixed temperature between 473 and 573 K for 120 min in air after ECAP. Anodizing was conducted for 40 min at $100-400A/m^2$ at 293 K in a solution containing 1.53 mol/L of $H_2SO_4$ and 0.0185 mol/L of $Al_2(SO_4)_3$. The internal stress generated in anodic oxide films during anodization was measured with a strain gauge to clarify the effect of ECAP on the pitting corrosion resistance of anodized Al-Mg alloy. The time required to initiate the pitting corrosion of anodized Al-Mg alloy was shorter in samples subjected to ECAP, indicating that ECAP decreased the pitting corrosion resistance. However, the pitting corrosion resistance was greatly improved by annealing after ECAP. The time required to initiate pitting corrosion increased with increasing annealing temperature. The strain gauge attached to Al-Mg alloy revealed that the internal stress present in the anodic oxide films was compressive stress, and that the stress was larger with ECAP than without. The compressive internal stress gradually decreased with increasing annealing temperature. Scanning electron microscopy showed that cracks occurred in the anodic oxide film on Al-Mg alloy during initial corrosion and that the cracks were larger with ECAP than without. The ECAP process of severe plastic deformation produces large internal stresses in the Al-Mg alloy; the stresses remain in the anodic oxide films, increasingthe likelihood of cracks. It is assumed that the pitting corrosion is promoted by these cracks as a result of the higher internal stress resulting from ECAP. The improvement in the pitting corrosion resistance of anodized AlMg alloy as a result of annealing appears to be attributable to a decrease in the internal stresses in anodic oxide films

• Korean Journal of Veterinary Service
• /
• 제35권3호
• /
• pp.223-230
• /
• 2012

This study was carried out to investigate the heavy metal and microbiological hazards on by-products (liver, omasum, small intestines) of cattle. From April to October in 2011, one hundred and twenty samples were equally collected from slaughterhouse and meat by-product markets in Incheon city. The total bacteria counts and E. coli count were applied to assess the microbiological quality. Food borne bacteria including Salmonella spp., Listeria monocytogenes, Staphylococcus aureus, Clostridium perfringens and E. coli O157:H7 were also determined. The results were obtained as follows: The undesirable grade (more than $10^5\;CFU/cm^2$) was detected in the by-product from 18.3% (slaughterhouse) and 23.3% (by-product markets). The frequency of generic E. coli (more than $10^2\;CFU/cm^2$) from the slaughterhouse was 20.0%, whereas that of the meat by-product markets was 26.7%. Of the samples from slaughterhouse, 3 (5.0%), 5 (8.3%), and 12 (20.0%) samples were contaminated with Salmonella spp, S. aureus, and C. perfringens, respectively. S. aureus and C. perfringens were also detected in 6 (10.0%) and 25 (41.7%) samples in the meat by-product markets, respectively. Nine of 11 S. aureus isolates harbored toxin gene. However, the cpe gene of C. perfringens was not detected among the 37 isolates. The detection rate was higher in August than in February, April and June. The levels of Cd and Pb in all the samples tended to be low (<0.2 mg/kg). This preliminary data could be used for legislation on the regulation and control of microorganism and heavy metal in by-products of cattle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.158-158
• /
• 2009

기계적 에너지를 전기적 에너지로 변환하는 에너지 변환소자인 압전 세라믹스는 액추에이터, 변압기, 초음파모터 및 각종 센서로 응용되고 있으며, 그 응용분야는 크게 증가하고 있다. 최근에는 이러한 압전 소자를 앞으로 도래하는 ubiquitous, 무선 모바일 시대의 휴대용 전자제품, robotics 등의 분야에 적용하기 위하여 소형화 및 경량화를 구현하고자 다양한 연구가 진행되고 있다. 본 연구에서는 압전 특성이 우수한 PNN-PMN-PZT 삼원계 세라믹을 이용하여 압전 트랜스포머를 제작하고 전기적 특성을 평가하였다. 압전트랜스포머는 전왜-압전효과를 이용한 소전력용 고전압발생소자로서 종래의 권선형 트랜스포머에 비교해서 소형, 경량이면서 승압비가 높고 구조가 간단하므로 직류 고전압전원에 응용되고 있다. 압전트랜스의 이론적인 고찰은 Rosen 이후로 많은 연구자들에 의해서 보고되었다. 그런데 압전세라믹트랜스는 공진 시 강력한 에너지변환을 하기 때문에 재료의 물리적 특성이 매우 중요함에도 불구하고, 이러한 물리적 특성에 관한 연구는 거의 없었다. 따라서 본 연구에서는 물리적 특성과 전기적 특성의 상호 연관성을 고찰하고자 하였다. 압전트랜스용 재료는 전기기계결합계수($k_p$)와 기계적품질계수(Qm)가 높아야 한다. 전기기계결합계수를 높이기 위해서는 상경계 조성의 Pb(Zr,Ti)$O_3$[PZT]계 세라믹스가 가장 우수하다. 본 연구에서는 기계적 품질계수를 향상시키기 위해서 $Pb(Nn_{1/3}Nb_{2/3})_{0.06+x}(Mn_{1/3}Nb_{2/3})_{0.065-x}(Zr_{0.48}Ti_{0.52})_{0.875}0_3$계의 조성을 설계하여 압전특성을 평가하고 미세구조를 분석하였다. 또한 압전트랜스를 제작하여 입출력의 승압비 및 주파수 특성 등도 평가하였다.

• Korean Journal of Heritage: History & Science
• /
• 제41권1호
• /
• pp.5-19
• /
• 2008

Thirty six samples of Western asia glass vessel shards which were excavated from South Mound of Hwangnamdaechong were each measured for thickness, pore size and specific gravity and analyzed for ten major compositions and thirteen trace elements. The glass samples with colorless, greenish blue and dark purple blue were well classified by principal component analysis(PCA). All glass shards of Hwangnamdaechong belonged to Soda glass system ($Na_2O-CaO-SiO_2$) which have the range of 14~17% $Na_2O$ and 5~6% CaO. The corelation coefficients of (MgO, $K_2O$) and (MnO, CuO) showed above 0.90. The concentrations of thirteen trace elements apparently differentiated from colorless, greenish blue and dark blue glasses. We found that thirteen trace elements were very important indices for studying raw material of glass and the origin of glass making. Colorless glass : The specific gravity is $1.50{\pm}0.04$. Circle or oval circle pores are observed with regular direction in internal zone and the longest one is about 0.35 mm. The raw material of sodium must be the plant ash because sodium glasses contain HCLA(High CaO, Low $Al_2O_3$) and HMK(high MgO, high $K_2O$) and suggested to Sasanian glass. The total amount of coloring agent of colorless glass is below 1 % which is too small to attribute to the color. Greenish blue glass : The specific gravity is $1.58{\pm}0.04$. The fine pores which are 0.1~0.2mm are dispersed in internal zone. Sodium glasses are distributed to HCLA and HMK. Therefore the greenish blue glass also have used plant ash for raw material of sodium with the same as colorless glass. It was also suggested to the glass of Sasanian. The total amount of coloring agent of greenish blue glass is about 4% under the influence of working MnO, $Fe_2O_3$ and CuO. Dark purple blue glass : The specific gravity is $1.48{\pm}0.19$. There are rarely pores in internal zone. They are distributed to HCLA and LMK(Low MgO, Low $K_2O$) and suggested to Roman glass. The raw material of sodium is estimated to natron. The total amount of coloring agents of greenish blue is about 3% by $Fe_2O_3$ and CuO. These studies for western asia glass shards from South Mound of Hwangnamdaechong could be used in the future as the standard data which could be compared with those of other several graves in Korea and dispersed in foreign areas.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제24권4호
• /
• pp.547-555
• /
• 2014

Objective: This study was conducted to investigate the association between subjective distress symptoms and argon welding among workers in Gyeongnam Province shipyard. Method: 31 argon and 29 non-argon welding workers were selected as study subjects in order to measure concentrations of personal dust, welding fumes and other hazardous materials such as ZnO, Pb, Cr, FeO, MnO, Cu, Ni, $TiO_2$, MgO, NO, $NO_2$, $O_3$, $O_2$, $CO_2$, CO and Ar. An interviewer-administered questionnaire survey was also performed on the same subjects. The items queried were as follows: age, height, weight, working duration, welding time, welding rod amounts used, drinking, smoking, and rate of subjective distress symptoms including headache and other symptoms such as fever, vomiting and nausea, metal fume fever, dizziness, tingling sensations, difficulty in breathing, memory loss, sleep disorders, emotional disturbance, hearing loss, hand tremors, visual impairment, neural abnormality, allergic reaction, runny nose and stuffiness, rhinitis, and suffocation. Statistical analysis was performed using SPSS software, version 18. Data are expressed as the mean ${\pm}SD$. An ${\chi}^2$-test and a normality test using a Shapiro wilk test were performed for the above variables. Logistic regression analysis was also conducted to identify the factors that affect the total score for subjective distress symptoms. Result: An association was shown between welding type (argon or non-argon welding) and the total score for subjective distress symptoms. Among the rate of complaining of subjective distress symptoms, vomiting and nausea, difficulty breathing, and allergic reactions were all significantly higher in the argon welding group. Only the concentration of dust and welding fumes was shown to be distributed normally after natural log transformation. According to logistic regression analysis, the correlations of working duration and welding type (argon or non-argon) between the total score of subjective distress symptoms were found to be statistically significant (p=0.041, p=0.049, respectively). Conclusion: Our results suggest that argon welding could cause subjective distress symptoms in shipyard workers.

• Korean Journal of Environmental Agriculture
• /
• 제13권2호
• /
• pp.142-150
• /
• 1994

To investigate differences in Cd and Zn contents of paddy soils and rice plants polluted by the municipal and industrial waste water in the Mangyeong River Area, soil and plant samples were collected at several distances from the main inlet and at different depths of the soil. Soil samples were extracted with $4M-HNO_3$ and plant samples were digested with a mixture of $HNO_3$and $HClO_4$for analyzing heavy metals by atomic absorption spectrophotometry. The contents of Cd and Zn in soils ranged from 0.38 to 1.17 and from 33.8 to 464.6mg kg^{-1}, respectively. The average Cd level in 1990 was less than that in 1982, but the Zn level in 1990 was higher than that in 1982 in general. No variation in Cd contents was observed in soils at the different distances from the source of waste water, but Zn contents in soils were lower with the increasing distances from the source of waste water. A significant correlation was observed among Cd content, OM, available silicate, CEC and $Ca^{++}$. Similar results existed among Zn content of 1982, OM and $Ca^{++}$. The Cd content in subsurface soils of 1992 was significantly correlated with Zn, Cu, and Pb in soils, and the Zn content in soils was significantly correlated with the Cu and Pb in soils, regardless of years. The Cd content in leaf blades of rice was more than seven times higher than that in brown rice. The Zn content in rice was higher than that in leaf blades and in panicle axis. The Cd content in panicle axis and the Zn content in all parts of rice were correlated with Zn, Cu and Pb contents in soils. The Cd and Zn contents in brown rice ranged from 0.10 to 0.90mg $kg^{-1}$ and from 4.2 to 95.9mg $kg^{-1}$ in the Mangyeong River Area, respectively.

• Korean Journal of Poultry Science
• /
• 제36권4호
• /
• pp.337-342
• /
• 2009

This work was conducted to investigate the manure excreta and chemical compositions of layers. Two hundred 1-d-old ISA Brown layers were used in this work, and ten of 200 layers were selected for measurement of manure excreta with feeding phase. Means of the manure excreta per bird, the moisture content of poultry, and the dried manure were $124.7\;{\pm}\;27.5\;g$/bird/day, $76.9\;{\pm}\;1.9%$, and $29.1\;{\pm}\;3.9\;g$/bird/day, respectively. N, $P_2O_5$, and $K_2O$ of manure (55 weeks) were $1.39\;{\pm}\;0.139$, $0.62\;{\pm}\;0.11$ and $0.68\;{\pm}\;0.09%$, respectively. pH, $BOD_5$, $COD_{Mn}$, and suspended solids (SS) were $8.19\;{\pm}\;0.71$, $50,266\;{\pm}\;621\;mg/L$, $62,832\;{\pm}\;803\;mg/L$, and $121,725\;{\pm}\;16,165\;mg/L$, respectively. Heavy metal contents in the manure were $0.003\;{\pm}\;0.0013\;ppm$ for Hg and $0.008\;{\pm}\;0.0012\;ppm$ for Pb, the latter of which was highly low compared with the standard (150 ppm), but no Cd was detected. The results of this work show the average excretion amounts and chemical compositions of layer's manure, which is used as an organic fertilizer.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1553-1555
• /
• 1999

Recently, $SrBi_2Ta_2O_9$(SBT) and $Pb(ZrTi)O_3$(PZT) were much attracted as materials of capacitor for ferroelectric random access memory(FRAM) showing higher read/write speed, lower power consumption and nonvolartility. Bi-layered SBT thin film has appeared as the most prominent fatigue free and low operation voltage for use in nonvolatile memory. To highly integrate FRAM, SBT thin film should be etched. A lot of papers on SBT thin film and its characteristics have been studied. However, there are few reports about SBT thin film due to difficulty of etching. In order to investigate properties of etching of SBT thin film, SBT thin film was etched in $CF_4$/Ar gas plasma using magnetically enhanced inductively coupled plasma (MEICP) system. When $CF_4/(CF_4+Ar)$ is 0.1, etch rate of SBT thin film was $3300{\AA}/min$, and etch rate of Pt was $2495{\AA}/min$. Selectivities of SBT to Pt. $SiO_2$ and photoresist(PR) were 1.35, 0.6 and 0.89, respectively. With increasing $CF_4$ gas, etch rate of SBT thin film and $P_t$ decreased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제25권12호
• /
• pp.943-948
• /
• 2012

A new water energy harvester module, which is composed of piezoelectric bimorph cantilevers, harvesting circuit and a shaft with 16 impellers at a center axis, was fabricated for energy harvesting application. High energy density $Pb(Zr_{0.54}Ti_{0.46})O_3$ + 0.2 wt% $Cr_2O_3$ + 1.0 wt% $Nb_2O_5$ (PZT-CN) thick film obtained by tape casting method was used for the bimorph cantilever. The PZT-CN bimorph cantilever with a proof mass of 49 g exhibited extremely high output power of 22.5 mW (24 $mW//cm^3$) at resonance frequency of 11 Hz. In addition, the fabricated water energy harvester has a cylindrical structure with 48 bimorph cantilevers clamped at inner surface. A significantly high output power of 433 mW was obtained at a rotation speed of 120 rpm with a resistive load of $500{\Omega}$ for the water energy harvester.