• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.856-862
• /
• 1997

박막형 CdTe/CdS 태양전지의 배면전극(back contacts)물질로서 Cu도핑된 ZnTe 박막(ZnTe:Cu)을 전착법(electroplating)으로 제조하는 연구를 수행하였다. Sulfate계의 전해질 수용액에서 CdTe 기판과 투명전극으로 코팅된 유리(In$_{2}$O$_{3}$: Sn, ITO)기판 위에 ZnTe 박막을 코팅하는 방법으로써 potentiostat와 기판(cathode), Pt counter electrode, Ag/AgCI 표준전극으로 구성된 장치를 사용하여 pH=2.5-4, T=70-8$0^{\circ}C$, 0.02M $Zn^{2+}$ 1x$10^{-4}$M TeO$_{2}$, 0.2M $K_{2}$SO$_{4}$조건에서 -0.800 Vs~-0.975 V 범위의 전압(V$_{a}$ )에 걸쳐 실험하였다. ITO박막을 기판으로 사용하여 cyclic voltammogram을 작성한 결과 약 -0.50 V 에서 Te환원 peak이 나타났다. Auger electron spectroscopy (AES)로 조성분석한 결과 표면에서 Zn signal이 강하게 나왔고 시편의 두께에 따라 Zn의 signal감소하는 반면 Cd signal은 증가하는 것이 확인되었다. SEM 사진으로부터 ZnTe의 표면이 작은 입자 (0.2$\mu\textrm{m}$ 이하)로 구성되어 있으며 낮은 V$_{a}$ 에서는 입자가 작아지면서 조직이 치밀해짐이 관찰되었다. Optical transmission방법에 의하여 ITO기판위에 입혀진 박막의 밴드갭은 2.5 eV으로 측정되었다. 수용액중의 Cu$_{2+}$와 triethanolamine(TEA)은 산성용액에서 착물형성이 이루어지지 않았으며 1,10-phenanthroline과는 pH=2에서도 착물이 형성되었다.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.83-90
• /
• 1990

The semiconducting $(Pb_1\;_xSn_x)_1$ $_yTe_y$, one of the low - temperature thermoelectric materials, has been prepared and its chemical composition and nonstoichiometry has been analyzed. The content of Pb in the specimens was determined by the complexometric back - titration method with EDTA and Pb(II) standard solutions. Te - content was analyzed with the redox titration method. The electrical conductivity and the thermoelectric power have also been measured by the DC 4 - probe and the heat-pulse technique, respectively. All of the specimens showed a nonstoichiometric behavior in their chemical compositions (Te excess), thus gave rise to a p - type semiconducting property, and the nonstoichoimetry became bigger as the Sn - content increased. The thermoelectric power vs. temperature results have been analyzed upon the basis of the Fermi level vs. temperature profiles in the saturation regime. The specimen of x=0.1 evolved a transition from p - to n - type property at about 670K, which has been explained by the fact that the mobility of electrons is bigger than that of holes in the temperature range of the intrinsic regime.

• Textile Coloration and Finishing
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2002

The aim of study was to elucidate dyeability and antimicrobial and antifungal activity of silk fabrics dyed with Sophora Radix extracts according to different mordants. Dyes were extracted from Sophora Radix using ethanol. Then, silk fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60%(owf), the mordant was 3%(owf), L.R was 1:20, the temperature was $60~60^\circ{C}$, the time of dyeing was 60min., and the time of mordanting was 60min. The dyeability was evaluated by surface color, K/S values and durability of dye. The skin microorganisms used in this study was S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E coli, A. niger, C. albicans and T. mentatrophytes. The results are as follows; 1. When mordants were added, K/S value of silk dyed was not improved much and surface color was 2.2Y to 8.8Y in H(hue) value which indicated greenish yellow to raddish yellow 2. The color fastness tests to light, perspiration, dry-cleaning, rubbing, and stain fabric washing show 4~5th degree which were valuated excellent. The color fastness to fade washing was improved to 3~4th degree by addition of $K_2CrO_7$ mordants. 3. Antibacterial activity of silk dyed using no-mordant as well as mordants was excellent on S. aureus, B. subtilis, S.epidermidis and P.acnes, but showed poor antibacterial activities on P.aeruginosa and E.coli such as gram negative baterials 4. Antifungal activity of silk dyed with ethanol extracts was good on A.niger, C.candida and T.mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 gous in silk dyed mordanting with $SnCl_2\cdot{2H}_2O$.

• Journal of Environmental Health Sciences
• /
• v.35 no.3
• /
• pp.201-208
• /
• 2009

Oxidation of phenol in aqueous media by electro-Fenton process using Ru-Sn-Sb/graphite electrode has been studied. Hydrogen peroxide was electrically generated by reaction of dissolved oxygen in acidic solutions containing supporting electrolyte and $Fe^{2+}$ was added in aqueous media. Phenol degradation experiments were performed in the presence of electrolyte media at pH 3. Effect of operating parameters such as current, electrolyte type (NaCl, KCl and $Na_2SO_4$) and concentration, $Fe^{2+}$ concentration, air flow rate and phenol concentration were investigated to find the best experimental conditions for achieving overall phenol removal. Results showed that current of 2 A, NaCl electrolyte concentration of 2g/l, 0.5M concentration of $Fe^{2+}$, air flow rate of 1l/min were the best conditions for mineralization of the phenol by electro-Fenton.

• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.175-188
• /
• 2015

For 63 soil series distributed in Jeju Island, natural uncultivated soils in each soil series were collected, and their physicochemical properties and their concentrations of 19 heavy metals including 8 heavy metals which are regulated by Korean Soil Environment Conservation Law, were analyzed. Moreover, the correlations between physicochemical properties and heavy metal concentrations, and between heavy metal concentrations were analyzed. The heavy metals distributed in the higher concentrations and the lower concentrations with arithmetric mean value, were Mn(730 mg/kg) and Ba(493 mg/kg), and Hg(0.146 mg/kg) and Tl(0.096 mg/kg), respectively. The correlations between pH($H_2O$) and heavy metals(Hg, Ni, Co, Se), between pH(NaF) and heavy metals(Hg, Ba, Se, Tl), and between organic matter content and heavy metals(Hg, Tl) were significant at the 0.01 level. From the correlations between heavy metal concentrations, there were 22 where there were significant at the 0.01 level and they showed positive correlation. Among those, the heavy metals showing the correlation higher than r=0.5, were Sb-V(0.878), Mo-Sn(0.867), Co-V(0.654), Co-Sb(0.648), Be-Sn(0.546), and Sn-Tl(0.528).

• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.709-715
• /
• 2001

We have been studied photosensitization mechanism's additive effect, of perylene 3,4,9,10-tetracarboxyl-diimide and X-phthalocyanine (charge generation materials), using the photochemical and photoelectrochemical approach. It was found that the photoreceptor on the excited state reacts with metal oxide, which creates the charge transfer on the interface of SnO2/electrolyte. In the electrode (X5P1) made of five X-phthalocyanine and single perylene 3,4,9,10-tetracarboxyldiimide layers, the cathodic photocurrent of X-phthalocyanine in the 400-600 nm region was increased by the addition of perylene 3,4,9,10-tetracarboxyldiimide. The maximum wavelength of fluorescence of perylene 3,4,9,10-tetracarboxyldiimide showed no dependence on the temperature. The addition of 4-dibenzylamino-2-methylbenzaldehyde diphenylhydrazone known as charge transport material was represented as decreasing photocurrent for X-phthalocyanine and perylene 3,4,9,10-tetracarboxyldiimide, respectively. In the electrode (X1P1) made of single X-phthalocyanine and single perylene 3,4,9,10-tetracarboxyldiimide layers, an anodic photocurrent of about 10.5 nA was generated by addition of hydroquinone at 550 nm. And the characteristic of photoinduced discharge was shown to decrease by a factor of 5 and the speed of dark decay was increased by a factor of 1.2.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.1
• /
• pp.79-84
• /
• 2004

The existing technological schemes for processing rhenium-containing raw materials involve the recovery of Re from solutions, which can be effectively achieved by anion exchange method. The application of anion exchange also allows to study rhenium state in aqueous solutions and to develop analytical control methods. The present work is focused on investigation of ion exchange equilibrium in the analytical system Re(VII)-HCl-$SnCl_2$-KSCN-anion exchanger by means of sorption-desorption method as well as by electron, IR- and diffuse reflection spectroscopy. It was shown that rhenium can be quantitatively recovered from this system. It is proposed to use the sorption-spectroscopic method for Re(VII) determination in aqueous solutions. The calibration curve is linear in the concentration range of 0.5-20.0 mg/L (sample volume is 25.0 mL) and the detection limit is 0.05 mg/L. The presence of Mo(VI), Cu(II), Fe(II, III), Ni(II), Zn(II) as well as $K^+,\;Na^+$ do not hinder the solid-phase determination of rhenium. Rhenium (VII) determination by diffuse reflection spectroscopy was carried out in model solutions as well as in samples of river-derived water and in solutions obtained after the dissolution of spent catalysts.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.80-82
• /
• 2009

The dependence of the efficiency characteristics of hydrogenated amorphous silicon single junction solar cells on the various intrinsic layer thickness has been investigate in the glass/$SnO_2$:F/p,i,n a-Si:H/Al type of amorphous silicon solar cells by cluster PECVD system. The open circuit voltage, short circuit current, fill factor and conversion efficiency have been measured under AM 1.5 condition. The result of the cell performance was improved about 8.2% due to an increase in the short circuit current.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.117-118
• /
• 2008

The main objectives of this study are develop an Electro-Chemical process for dyeing wastewater treatment. In this work, We are investigated to optimization of electro-chemical process condition such as pH, additives(NaCl), reaction time, current density. As a result, About 89% of color(influent 452.5 ptco. unit) was removed by Electro-Chemical process using type C $SnO_2$ electrode. This results are promising potential for dyeing wastewater treatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.2
• /
• pp.129-134
• /
• 1988

Enzymatical properties of Streptomyces sp. S-45 producing chitinase and ${\beta}$-1.3-glucanase isolated from soil were investigated. Chitinase activity was 3.01(U/ml) and ${\beta}$-1.3-glucanase activity was 2.49(U/ml). The optimum medium for mycolytic enzyme production of strain was composed of 0.7% colloidal chitin, 0.3% glucose, 0.5% asparagine, 0.2% peptone, 0.01% NaCl, 0.01% $K_2HPO_4$ and 0.01% $MgSO_4{\cdot}7H_2O$ in intial pH 7.0. The optimal condition for mycolytic enzyme activities were: pH 6.5-7.0, $45-50^{\circ}C$. Enzyme activities were activated by metal ion as $10^{-2}M\;Co^{{+}{+}}$, $Cu^{{+}{+}}$, $Mn^{{+}{+}}$, $Al^{{+}{+}{+}}$ and $10^{-3}M\;Sn^{{+}{+}}$ but $Ag^{{+}{+}}$, $Hg^{{+}{+}}$ inhibited.