• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.508-515
• /
• 2002

The effects of the crosslinking caused by irradiation dose, molecular weights of the foaming materials, and various foaming processes on the foam structure of the polypropylene (PP) were investigated. The maximum gel content of the PP was 48% when the sheet was irradiated with 3.2 Mrad. This high gel content improved the cell structures by providing high thermal stability. The increase of both the gel content and structural development were stopped at the irradiation dose exceeding 3.2 Mrad. The increase of the molecular weights served to help produce a foam with particularly fine and even cell structures, along with improved thermal stability as well.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.125-131
• /
• 2011

The effects of chopped kenaf fiber concentration on mechanical property of polypropylene (PP) composite are investigated. The addition of kenaf increased the tensile strength, flexural modulus, impact strength, specific gravity, and HDT, while decreased the elongation%, flexural strength, and melt flow index. The increase of mechanical properties is due to increased surface area contacting between fiber and polymer matrix and fiber-fiber interaction. Volatile extractives in the kenaf seemed to decrease the interfacial adhesion between kenaf surface and PP.

• Journal of the Korean Dietetic Association
• /
• v.10 no.2
• /
• pp.205-217
• /
• 2004

This study was carried out to provide information on the effect of nutrition education program for diabetic patients at the Guri City's Public Health Center. Subjects of this study were 31 persons(male 7, female 24) who attended all courses of "2002 Diabetes Education Class". They were indicated as the 'education group'(EG). Eating and living habits of EG were investigated before the education. EG's weight and blood glucose (post prandial 2 hours, PP2) were examined as well. EG's PP2 reduction was compared with a 'control group'(CG) who didn't join any course in that class. All of the subjects were non-insulin-dependent diabetes mellitus(NIDDM) patients. EG's average age was 62.4$\pm$8.8. Before taking the course, EG's PP2 was 251.5$\pm$29.6mg/dl, and body mass index(BMI) was 26.3$\pm$2.3 on average. Most of them were stressed out from their daily lives and usually had no exercise. Most people of EG ate meals rapidly and liked sweet and fatty foods. After the course of training, EG's weight and BMI before the training were not decreased significantly. However, all of the EG's PP2s, which were measured 4 times(before the meal at the special lunch session, after 2 hours at this meal, after 2 weeks and 4 weeks dietary assembly), were decreased in comparison with the PP2 which was checked prior to joining the training. EG's average PP2 was more reduced than CG's one. In addition, all groups' PP2s were decreased for 8 weeks. After all, this nutritional education at the public health center was effective in glycemic control for diabetes mellitus patients. Especially, when the dietary assembly as practical training was included in the educational process, the patient's dietary intake and PP2 was improved more effectively. Therefore, this study suggests that nutrition work at public health centers is necessary for the Health Promotion Policy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.2
• /
• pp.260-265
• /
• 2013

The purpose of this study was to investigate the dietary effects of persimmon peel (PP) and PP ethanol extract (PPE) on egg production, egg quality, and liver lipids in the late stage of egg production in laying hens. One hundred and twenty 50-wk-old Hy-Line Brown layers (n = 120) were fed different diets. Four replicate groups of 6 hens each were randomly assigned to 5 dietary treatments. The 5 dietary treatments were as follows: i) CON, basal diet; ii) PP 0.15, CON+0.15% PP (0.035% tannin); iii) PP 0.5, CON +0.5% PP (0.117% tannin); iv) PPE 0.075, CON+0.075% PPE (0.03% tannin); and v) PPE 0.25, CON+0.25% PPE (0.11% tannin). The total tannin concentration of PPE was higher (p<0.05) than that of PP. Egg production in the PP 0.5 group was higher than in the other groups. Egg production and mass of hens in the PPE 0.25 group showed a greater decrease than that in the other groups (p<0.05). Eggshell color in the PP 0.15, PP 0.5, and PPE 0.075 groups was lighter than that of the control group (p<0.05). The Haugh unit for the groups that were fed PP and PPE were significantly higher than that in the other groups after 7 d of storage (p<0.05). Therefore, PP seems an effective feed additive for improving the production performance and egg quality in late stage laying hens.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.29 no.3
• /
• pp.10-22
• /
• 2016

Objectives: The aim of the study was to investigate the characteristics of the autonomic innervation of the heart in Precocious Puberty (PP) Girls.Methods: We studied 87 girls visiting Dongshin University Suncheon Oriental Medicine hospital from first Januarty 2013 to 31th December 2015. Among the 87 girls who were selected 14 people under the age of 8. The subjects were categorized in two groups, 2 PP girls and 12 healthy controls. We studied the difference of Heart rate variability (HRV) between two groups by Independent samples T-test using SPSS for windows (version 22.0).Results: The Standard deviation of all normal R-R intervals (SDNN), The spuare root of the sum of the spuare of difference between adjacent normal R-R intervals (RMS-SD) of PP group was non-significantly lower than non-PP group. Total power (TP), Very low frequency power (VLF), High frequency power (HF), Low frequency power (LF) of PP group was non-significantly lower than non-PP group, LF/HF ratio of PP group was significantly higher than non-PP group. Normalized high frequency power (HF norm) of PP group was non-significantly lower than non-PP group. Normalized low frequency power (LF norm) of PP was non-signficantly higher than non-PP group.Conclusion: The results suggest that imbalance of sympathetic and parasympathetic nervous system from girls of precocious puberty can be seen.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.24-31
• /
• 2001

Polypropylenes(PP) with different melt index values were mixed with ethylene-propylene rubber(EPR) or ethylene-propylene diene monomer rubber(EPDM) and an ethylene copolymer containing carboxylic acid group in a twin screw extruder. Then test specimens were prepared from the pellets of the blends with an injection molding machine. The mechanical properties and morphology of fractured surfaces were measured. Relative peak intensities of carboxylic acid group on the specimen surface were measured with an attennuated total reflection infrared spectrometer (ATR-IR) and compared with each other. The blend specimens were found to have the gradient morphology of rubber domains in PP matrix in the core region and PP skin layer. The blends containing PP of higher melt index showed greater content of ethylene copolymer containing carboxylic acid on the surface when the relative peak intensities of ATR-IR for carboxylic acid were compared. As the melt index values were increased, the decrease tendency in mechanical propeties such as tensile strength and impact strength was more significant for PP/EPR blends than PP/EPDM blends.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.158-163
• /
• 1999

The quality change of black rice during storage at $20^{\circ}C$ was measured to determine a packaging material for black rice storage, using polyethylene film (PE), polypropylene film (PP) and laminated film with PE and PP (PE/PP). Water activity of black rice was 0.642 at initial time and changed little in 8 months during storage at $20^{\circ}C$. Acidity of black rice was 25 mg KOH at initial time and was the lowest, 33.16 mg KOH, within PE/PP of 0.10 mm in thickness in 8 months during storage at $20^{\circ}C$. L, a and b values, hunter color value of black rice were not changed significantly in all packaging materials during 8 month storage. Hardness of the black rice was increased a little, but changed the smallest in PF/PP and the largest in PE with 0.05mm in thickness in 8 months. During storage, hexanal content was increased the smallest in PE/PP and the largest in 0.05 mm PE. Among fatty acid of black rice, linoleic acid was changed the smallest in PE/PP and the largest in 0.05 mm PE. In conclusion, PE/PP was better for the storage of black rice than PE and PP.

• Environmental Engineering Research
• /
• v.23 no.3
• /
• pp.330-338
• /
• 2018

This study investigated the possibility of using potassium titanate oxide ($K_2Ti_4O_9$) and acrylic acid-grafted polypropylene fabric (PP-g-AA) as adsorbents capable of removing strontium from aqueous solutions. $K_2Ti_4O_9$ showed the highest rate of strontium removal in the weak alkaline range, while the PP-g-AA increased strontium removal in the neutral range. Moreover, the adsorption capacity of the $K_2Ti_4O_9$ was not affected by the coexistence of K and Na ions, while the adsorption capacity decreased when Ca and Mg ions were present at the same concentration as that of strontium. When coexisted at the same concentration as strontium, Na, K, Ca, and Mg ions strongly reduced the adsorption capacity of the PP-g-AA. The results also indicated that the adsorption of strontium on $K_2Ti_4O_9$ was consistent with both the Langmuir and Freundlich adsorption isotherms. In contrast, the adsorption of strontium on the PP-g-AA was more consistent with the Langmuir isotherm model. Moreover, the adsorption equilibrium time of $K_2Ti_4O_9$ was generally 12 h, while that of the PP-g-AA was 5 h, indicating that the adsorption rates were consistent with the pseudo-second order kinetics model. $K_2Ti_4O_9$ and the PP-g-AA could be regenerated by simple washing with 0.5 N HCl.

• International Journal of Advanced Culture Technology
• /
• v.3 no.2
• /
• pp.25-33
• /
• 2015

This study aims to synthesis the self-cleaning fibers. The nano-titanium dioxide ($TiO_2$) were blend with the polypropylene (grade 561R) at 1wt%, 3wt%, 5wt%, 10wt%, 15wt% and 20wt%. The $TiO_2$-fibers were obtained from single screw extruder. The mechanical, thermal, rheology and self-cleaning properties were also investigated. The results showed that the tensile strength of the $nTiO_2$-PP fibers decreased with increasing of the amount of $TiO_2$. The presents of the $TiO_2$ in the PP fibers significantly showed the improving of the self-cleaning properties under sunlight and 20 watt of UV radiation. The $TiO_2$-PP fibers in presents of $TiO_2$ 20wt% showed the best results of self-cleaning under 5 hours of the sunlight which the similar results were found under 5 hours of 20 watts of UV radiation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1992.07a
• /
• pp.57-60
• /
• 1992