• Journal of the Korean Chemical Society
• /
• v.51 no.3
• /
• pp.240-243
• /
• 2007

The eight coordinated yttrium(III) complex Y(tpb)3(H2O)2 (Htpb=4,4,4-Trifluoro-1-phenyl-1,3-butanedione) has been synthesized and structurally characterized by X-ray diffraction method. The coordination polyhedron of Y(tpb)3(H2O)2 has a dodecahedron. The angle between two trapezia, Y-O2-O1-O5-O6 and Y-O4-O3-O8-O7, is 89.59°. The O1-O5 and O3-O8 distances are 2.965 and 2.995 A whereas the O2-O6 and O4-O7 distances are 4.256 and 4.403 A.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.472-477
• /
• 2000

Oxides of the form Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO present properties that make them useful as power NTC thermistor for current limited. Electrical properties of Mn$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO power NTC thermistor such as I-V characteristics tim constant activation energy and heat dissipation coefficient measured as a function of temperature and composition. In Mn$_{4}$/O$_{4}$-CuO-Co$_{3}$/O$_{4}$-NiO-ZnO system with the 5wt% addition of Co$_{3}$/O$_{4}$ it can be seen that resistivity and B-constant were increased as the ratio of ZnO/Mn$_{3}$/O$_{4}$ was increased. Heat dissipation constant, I-V characteristics and time constant showed similar behaviour compared with those of conventional thermistors. In particular resistance change ratio ($\Delta$R) the important factor for reliability varied within $\pm$5% indicating the compositions of these products could be available for power thermistor.

• Journal of the Korean Ceramic Society
• /
• v.25 no.1
• /
• pp.35-41
• /
• 1988

In the system of Li2O-MgO-Al2O3-Cr2O3, the crystalline solid solution of LiCrO2 along the pseudo-binary join between rocksalt structure(LiCrO2) and spinel structure(MgCr2O4 or MgAl2O4) have been investigated by x-ray diffraction techniques. In this study, order-disorder phase transition of LiCrO2 was observed and the unit cell of the disordered LiCrO2 structure has been established. It has been found that LiCrO2 makes a solid solution over a wide range with MgAl2O4, while not with MgCr2O4. This difference was explained as being due to the ability of oxygen lattice distortion which depended on the relative sizes and chemical bonding characteristics of the substituted ions.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1525-1528
• /
• 2005

The synthesis and characterization of ${K_3[Ru(C_2O_4)3]{\cdot}4H_2O\;(C_2O_4}^{2-}$ = oxalato anoin) complex are described, and its redox properties (in buffer solution of pH = 12) have been investigated. This complex is used for in situ generation of oxoruthenates complexes which have been characterized by electronic spectroscopy. Reaction of ${K_3[Ru(C_2O_4)3]{\cdot}4H_2O$ with excess ${S_2O_8}^{2-}$ in molar KOH generates trans-${[RuO_3(OH)_2]^{2-}/S_2O_8}^{2-}$ reagent while with excess ${BrO_3}^-$ in molar $Na_2CO_3$ generates ${[RuO_4]^-/BrO_3}^-$ reagent. Avoiding the direct use of [$RuO_4$] the organic-soluble $(n-Pr_4N)^+[RuO_4]^-$, (TPAP) has been isolated by reaction of $K_3[Ru(C_2O_4)3]{\cdot}4H_2O$ with excess ${BrO_3}^-$ in molar carbonate and n-$Pr_4$NOH. In a mixture of $H_2O/CCl_4$ ruthenium tetraoxide can be generated by reaction of $K_3[Ru(C_2O_4)3]{\cdot}4H_2O$ with excess ${IO_4}^-$. The catalytic activities of oxoruthenates that have been made from $K_3[Ru(C_2O_4)3]{\cdot}4H_2O$ towards the oxidation of benzyl alcohol, piperonyl alcohol, benzaldehyde and benzyl amine at room temperature have been studied.

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.620-625
• /
• 2012

A general synthetic method to make $Fe_3O_{4-{\delta}}$ (activated magnetite) is the reduction of $Fe_3O_4$ by $H_2$ atmosphere. However, this process has an explosion risk. Therefore, we studied the process of synthesis of $Fe_3O_{4-{\delta}}$ depending on heat-treatment conditions using $FeC_2O_4{\cdot}2H_2O$ in Ar atmosphere. The thermal decomposition characteristics of $FeC_2O_4{\cdot}2H_2O$ and the ${\delta}$-value of $Fe_3O_{4-{\delta}}$ were analyzed with TG/DTA in Ar atmosphere. ${\beta}-FeC_2O_4{\cdot}2H_2O$ was synthesized by precipitation method using $FeSO_4{\cdot}7H_2O$ and $(NH_4)_2C_2O_4{\cdot}H_2O$. The concentration of the solution was 0.1 M and the equivalent ratio was 1.0. ${\beta}-FeC_2O_4{\cdot}2H_2O$ was decomposed to $H_2O$ and $FeC_2O$4 from $150^{\circ}C$ to $200^{\circ}C$. $FeC_2O4$ was decomposed to CO, $CO_2$, and $Fe_3O_4$ from $200^{\circ}C$ to $250^{\circ}C$. Single phase $Fe_3O_4$ was formed by the decomposition of ${\beta}-FeC_2O_4{\cdot}2H_2O$ in Ar atmosphere. However, $Fe_3C$, Fe and $Fe_4N$ were formed as minor phases when ${\beta}-FeC_2O_4{\cdot}2H_2O$ was decomposed in $N_2$ atmosphere. Then, $Fe_3O_4$ was reduced to $Fe_3O_{4-{\delta}}$ by decomposion of CO. The reduction of $Fe_3O_4$ to $Fe_3O_{4-{\delta}}$ progressed from $320^{\circ}C$ to $400^{\circ}C$; the reaction was exothermic. The degree of exothermal reaction was varied with heat treatment temperature, heating rate, Ar flow rate, and holding time. The ${\delta}$-value of $Fe_3O_{4-{\delta}}$ was greatly influenced by the heat treatment temperature and the heating rate. However, Ar flow rate and holding time had a minor effect on ${\delta}$-value.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.2
• /
• pp.117-124
• /
• 2010

The sorption of $AsO_4,\;SeO_3,\;CrO_4$ on schwertmannite and thermal analysis of sorbed samples were carried out. The results of sorption experiments showed that sorption characteristics of those three oxyanions on schwertmannite can be divided into two groups. The extent of sorption of $AsO_4$ and $SeO_3$ were 100% at up to 1 mM solution concentration, and they increased no more significantly. This can be interpreted as $AsO_4$ and $SeO_3$ substituting $SO_4$ in schwertmannite strucure by the ratio of 1 : 1. The extent of the sorption of $CrO_4$ was much lower than those of other two oxyanions. Thermal analysis was performed using two kinds of sorbed samples at 0.1 and 1.25 mM concentrations. The results of the thermal analysis showed that the samples sorbed by three different oxyanions have different thermal characteristics. The samples sorbed by $AsO_4$ showed smaller weight loss around $600^{\circ}C$ than the original loss of pure schwertmannite, and it is attributed to the substitution of $AsO_4$ for $SO_4$, which was caused by the loss of $SO_4$, than pure schwertmannite due to the substitution of $SO_4$ by $AsO_4$. It also showed additional weight loss around $600^{\circ}C$ due to the decomposition of $AsO_4$ at that temperature. The weight loss of samples sorbed by $SeO_3$ started at slightly lower temperature than that sorbed by $SO_4$ and kept that loss at wider temperature range, probably indicating that the decomposition of $SeO_3$ occurs at slightly lower temperature. However, for the samples sorbed by $CrO_4$, the weight loss caused by the decomposition of $SO_4$ was also smaller and there was no additional weight loss at higher temperature due to the thermal stability of $CrO_4$, indicating that $SO_4$ was also substituted by $CrO_4$ in schwertmannite. Sorption experiment and thermal analysis indicate that $CrO_4$ sorbs on schwertmannite by substiuting $SO_4$, but the affinity to $SO_4$ or instability of $CrO_4$ in scwertmannite structure probably prohibit perfect 1 : 1 substitution.

• Journal of Industrial Technology
• /
• v.36
• /
• pp.77-81
• /
• 2016

Superparamagnetic $Fe_3O_4$ nanoparticles with particle size from 10 to 20 nm were synthesized by coprecipitation method. Subsequently, the $Fe_3O_4$ nanoparticles were used to fabricate $Fe_3O_4/SiO_2$ core-shell nanoparticles by sol-gel method. The $Fe_3O_4/SiO_2$ nanoparticles synthesized by sol-gel method exhibit the high uniformities of particle size and shape. We also investigated the heating characteristics of $Fe_3O_4$ and $Fe_3O_4/SiO_2$ nanoparticles for biomedical applications. The $Fe_3O_4$ nanoparticles show the faster temperature increase and the higher specific loss power(SLP) value than the $Fe_3O_4/SiO_2$ nanoparticles.

• Journal of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.383-388
• /
• 1982

$Mo_2O_4Cl_2$$(X-py)_4{\cdot}2H_2$O and $(X-pyH)_4$[$Mo_2O_4(NCS)_6)$]${\cdot}H_2$O have been prepared. The infrared, electronic and reflectance spectra, molar conductances and magnetic susceptibility data of complexes are reported. $Mo_2O_4Cl_2$$(X-py)_4{\cdot}2H_2$O (X-py were 3-and 4-cyanopyridine, nicotinamide, 3,5-lutidine and 2-amino-4-picoline) were obtained by hydrolysis of the corresponding substituted pyridinium oxopentachloromolybdates(Ⅴ). Addition of water and substituted pyridines to molybdenum(Ⅴ)-thiocyanate ethylacetate extract yielded brown compounds, $(X-pyH)_4$[$Mo_2O_4(NCS)_6)$]${\cdot}H_2$O where X-py were pyridine, ${\alpha}$, 3-bromopyridine 3,5-lutidine, 3-benzoylpyridine and 4-acetylpyridine. Binuclear, $Mo_2O_4Cl_2(X-py)_4{\cdot}2H_2$ prepared from hydrolysis of $(X-pyH)_2[MoOCl_5]{\cdot}H_2O$ were diamagnetic and nonelectrolytes. The anion of $(X-pyH)_4$[$Mo_2O_4(NCS)_6)$]${\cdot}H_2$O was formulated as dimer and electrolyte.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.395-403
• /
• 2006

It is known that $MgAl_2O_4$ has higher resistance to moisture than MgO, in humid ambient MgO is chemically unstable. It reacts very easily with moisture in the air. In this study, the characteristic of $MgAl_2O_4$ and $MgAl_2O_4/MgO$ layers as dielectric protection layers for AC- PDP (Plasma Display Panel) have been investigated and analysed in comparison for conventional MgO layers. MgO and $MgAl_2O_4$ films both with a thickness of $1000\AA$ and $MgAl_2O_4/MgO$ film with a thickness of $200/800\AA$ were grown on the Cu substrates using the electron beam evaporation. $1000\AA$ thick aluminium layers were deposited on the protective layers in order to avoid the charging effect of $Ga^+$ ion beam while the focused ion beam(FIB) is being used. We obtained sputtering yieds for the MgO, $MgAl_2O_4$ and $MgAl_2O_4/MgO$ films using the FIB system. $MgAl_2O_4/MgO$ protective layers have been found th show $24{\sim}30%$ lower sputtering yield values from 0.244 up to 0.357 than MgO layers with the values from 0.364 up to 0.449 for irradiated $Ga^+$ ion beam with energies ranged from 10 kV to 14 kV. And $MgAl_2O_4$ layers have been found to show lowest sputtering yield values from 0.88 up to 0.109. Secondary electron emission coefficient(g) using the ${\gamma}$- FIB. $MgAl_2O_4/MgO$ and MgO have been found to have similar g values from 0.09 up to 0.12 for indicated $Ne^+$ ion with energies ranged from 50 V to 200 V. Observed images for the surfaces of MgO and $MgAl_2O_4/MgO$ protective layers, after discharge degradation process for 72 hours by SEM and AFM. It is found that $MgAl_2O_4/MgO$ protective layer has superior hardness and degradation resistance properties to MgO protective layer.

• Journal of the Korean Ceramic Society
• /
• v.31 no.5
• /
• pp.505-512
• /
• 1994

It has been reported that a biocement obtained by mixing CaO-SiO2-P2O5 glass powder and ammonium phosphate solution has biocompatibility as well as high strength. However, the compositional dependence on its hardening and hydroxyapatite formation phenomena has not been studied. Therefore, the main objective of this work is to study the effects of P2O5, MgO in CaO-SiO2 system glass on the hardening and hydroxyapatite formation. When more than 50 mole% of CaO containing CaO-SiO2 glasses was reacted with ammonium phosphate solution, CaNH4PO4.H2O crystal was formed, but the glass with less than 50 mol% of CaO formed (NH4)2HPO4 and NH4H2PO4 crystals which are derived from ammonium phosphate solution without reacting with the glasses. As the amount of P2O5 in CaO-SiO2-P2O5 glass system was increased, the formation of CaNH4PO4.H2O crystal was enhanced. When those hardened samples were reacted with tris-buffer solution, hydroxyapatite was obtained only for the sample with CaNH4PO4.H2O. While the substitution of MgO for CaO decreased the formation of CaNH4PO4.H2O crystal. MgNH4PO4.H2O crystla was formed in high MgO containing glass, which did not react with tris-buffer solution.