• 한국대기환경학회지
• /
• 제22권3호
• /
• pp.361-371
• /
• 2006

This study examines ozone episodes occurred during the intensive sampling periods (Jun. 1-30, 2004) in the air of Seoul metropolitan area. During that period, there were 8 events (or days) in which 1 hr averaged ozone concentrations were greater than 100 ppbv. The photochemical analysis of ozone chemistry (i.e., budget and formation and destruction strengths of ozone) was carried out using a photochemical box model. Peaks in diurnal ozone variations during ozone episode periods occurred were concurrent with the sudden change of the slope of $NO_{2}/NO$ ratio, suggesting significant correlation with photochemical reactivity. In addition, the ozone peaks were concurrent with high concentrations of ozone precursors, peroxy radicals of $HO_{2},\;CH_{3}O_{2},\;and\;RO_{2}$. High ozone levels during the ozone episodes are likely to be affected by ozone destruction rate.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 1992년도 자외선 차단 화장품의 SPF에 관한 심포지움(대한화장품학회)
• /
• pp.97-114
• /
• 1992

In these days sun products are developed and produced by the cosmetic scientists in the world. Peoples need strongly to protect themselves from the hazardous UV rays dued to the destruction of ozone layer. Therfore, we, cosmetic scientists must have an effort to produce the more effective goods. In this article the market survey of sun-products as well as the currency of sunscreen agents was investigated. It was found that Benzophenone - 3 and Ocytyl methoxy cinnamate were widely used. The lotions, using Benzophenone - 3 as the chemical agents, and TiO$_2$and micro TiO$_2$ as the physical agents, were measured the UV-Spectrum in the Dilution and Application method. Photoprotective activity of chemical agents can usually be measured in solution state. However, that of the insoluble physical agents such as TiO$_2$is hardly measured in this state. Photoprotective ability of the insoluble physical agents was able to be measured by application of lotions to the surface of UV cells. It was found by this method that micro TiO$_2$showd stronger UV scattering effect than TiO$_2$in this method.

• 한국대기환경학회지
• /
• 제8권1호
• /
• pp.7-12
• /
• 1992

This study was conducted to determine the effectiveness of silver thiosulfate(STS) in reducing $O_3$ injury to tomato plants(Lycopersicon esculentm Mill. 'Pink Glory'). Two days prior to $O_3$ fumigation, plants were given a foliar spray of STS solution at concentrations of 0, 0.2, 0.4, 0.6 mM contained with 0.05% Tween-20. STS concentrations below 0.6 mM were significantly effective in providing protection aginst $O_3$ exposure(16 h at 0.3 ppm). STS reduced leaf injury rate, defoliation of cotyledons, ethylene production and degree of epinasty induced by $O_3$ injury. STS slightly increased ethylene production in non-$O_3$-fumigated plants, but changes of chlorophyll content and transpiration rate on a whole plant basis were not observed. In $O_3$-fumigated plants, STS treatment reduced chlorophyll destruction but did not affect transpiration rate. STS treatment seemed not to affect peroxidase(POD) and superoxide dismutase (SOD) activity in non-fumigated plants but reduced increasing activity of POD by $O_3$ fumigation. However, such an effect as above was not found in SOD activity. Even though enzymatic protection effects were not confirmed, the fact that reduction of acute injury rate was attained for 16 h fumigation indicates that the phytoprotective effects of STS are not necessarily related to blocking the action of strees-induced-ethylene as an anti-ethylene agent.

• 한국환경과학회지
• /
• 제22권1호
• /
• pp.83-89
• /
• 2013

Silicon carbide with aluminium oxide was used to remove the sulphur hexafluoride ($SF_6$) gas using microwave irradiation. The destruction and removal efficiencies (DREs) of $SF_6$ were studies as a function of various decomposition temperatures and microwave powers. The decomposition of $SF_6$ gas was analyzed using GC-TCD. XRD (X-ray powder diffraction) and XRF (X-ray Fluorescence Spectrometer) were used to characterize the properties of aluminum oxide. DREs of $SF_6$ were increased as the microwave powers were increased. Additive aluminium oxide on SiC increased the removal efficiencies and decreased the decomposition temperature. The XRD results show that the ${\gamma}-Al_2O_3$ was transformed to ${\alpha}-Al_2O_3$ during $SF_6$ decomposition by microwave irradiation. It was found that the best material to control $SF_6$ was SiC with $Al_2O_3$ 30 wt% in consideration of microwave energy consumption and $SF_6$ decomposition rate.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.479-484
• /
• 2004

Reactions of NO$_{x}$, HO$_{x}$ and $O_3$ chemistry in a diffusion process of the exhaust plume under a stratospheric condition were investigated numerically. Expanding Box method was used to assess the effects of exhaust gases from a stratospheric flight system on $O_3$ depletions. Sensitivity analysis was also performed to identify prime reactions of $O_3$ depletions in an exhaust plume right after the nozzle. In addition, a calculation of reactive flows in stratospheric condition was performed to investigate the characteristics of reactions in a plume. As a result of this study, prime reactions of NO$_{x}$, HO$_{x}$ and $O_3$chemistry in an exhaust plume were identified, and fundamental behavior of chemical species were examined in a exhaust plume.t plume.

• 공업화학
• /
• 제26권2호
• /
• pp.205-209
• /
• 2015

이산화탄소 포집 및 활용(CCU)은 화석연료 시 배출되는 온실가스인 $CO_2$ 저감과 이용을 위해 잠재력을 가지고 있는 기술이다. 이산화탄소를 분해하기 위해 3상 글라이딩 아크 플라즈마-촉매 반응기를 설계 및 제작하였다. 이산화탄소 저감 특성 실험은 단일 이산화탄소 가스 공급 유량 변화와 이산화탄소와 메탄 혼합 주입에 따른 주입 전력 변화, 촉매 그리고 수증기 공급 변화에 대해 연구를 수행하였다. 단일 이산화탄소 공급 유량이 12 L/min에서 분해율이 7.9%, 에너지 분해 효율은 $0.0013L/min{\cdot}W$로 나타났다. 이산화탄소 분해됨에 따라 일산화탄소와 산소가 생성된다. 메탄과 이산화탄소 혼합가스를 주입 시 $CH_4/CO_2$ 비 1.29, 주입 전력 0.76 kW에서 이산화탄소 분해율과 메탄 전환율이 각각 37.8, 56.6%를 보였다. $NiO/Al_2O_3$ 촉매 설치 시, 플라스마 단독 공정에 비해 이산화탄소 분해율 및 메탄 전환율이 11.5, 9.9% 증가한다. 수증기 공급으로 인한 이산화탄소 분해 효과에는 큰 영향을 주지 못한다.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.926-934
• /
• 1991

The effect of aggregates on the forming and sintering behaviors of BaTiO3 was studied. Aggregates and deaggregates of fine crystallite were obtained by thermal decomposition of oxalate coprecipitates and subsequently crushing them with a press, respectively. Large voids formed by packing of aggregates were not easily eliminated despite the successive destruction of aggregates with increasing forming pressure. As a result, compacts of aggregates showed inhomogeneity with larger mid-pore size and broader pore size distribution with respect to those of deaggregates. This inhomogeneity caused differential shrinkage and consequental internal stress, which retarded densification. The differential sintering increased the size of mid-pores in the initial stage, and formed duplex structure composed of dense region with abnormally grown grains and porous region with fine grains. The driving force of this abnormal grain growth shown in the specimens of aggregates was attributed to the minimization of the elastic strain energy due to internal stress.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.6-9
• /
• 2012

In this study, we carried out an investigation of the etching characteristics (etch rate, selectivity to $SiO_2$) of ZnO thin films in $N_2/Cl_2$/Ar inductivity coupled plasma. A maximum etch rate and selectivity of 108.8 nm/min and, 3.21, respectively, was obtained for ZnO thin film at a $N_2/Cl_2$/Ar gas mixing ratio of 15:16:4 sccm. The plasmas were characterized by optical emission spectroscopy. The x-ray photoelectron spectroscopy analysis showed the efficient destruction of oxide bonds by ion bombardment. An accumulation of low volatile reaction products on the etched surface was also shown. Based on this data, an ion-assisted chemical reaction is proposed as the main etch mechanism for plasmas containing $Cl_2$.

• 환경위생공학
• /
• 제15권3호
• /
• pp.70-74
• /
• 2000

The technology of malodorous substances treatment was classified physical separation and chemical destruction. This study was carried out to investigate the characteristics of malodorous substances treatment with the change of operating conditions from the ozone generator. The major results of this study were as follows : Removal efficiency by additive ozone rate was measured $NH_3$:95%(ozone additive rate : 2), $H_2S$ : 97%(ozone additive rate:4), $CH_3SH$ : 96%(ozone additive rate : 3), $(CH_3)_2S_2$ : 97%(ozone additive rate:5), $(CH_3)_3N$ : 95%(ozone additive rate : 1), $CH_3CHO$ : 95%(ozone additive rate : 2), $C_6H_5CHCH_2$ : 95%(ozone additive rate : 2).

• 공업화학
• /
• 제28권5호
• /
• pp.547-553
• /
• 2017

본 연구는 $TiO_2$ 골격에 Pd을 삽입시켰을 때 나타나는 광 촉매 성능의 차이에 초점을 두고, $TiO_2$와 x mol% $Pd-TiO_2$(x = 0.25, 0.5, 0.75 그리고 1.0)의 5가지 촉매를 제안하였다. 전형적인 졸-겔 방법을 사용하여 촉매를 합성하고 각 촉매의 페놀 광 분해 성능을 평가하였다. XRD, TEM, SEM/EDS, UV/Vis 분광법, 광 발광 분광법 등을 이용하여 촉매의 물리화학적 특성을 확인하였고, 광 발광 분광법 및 광 전류 측정으로 광학적 특성을 확인하였다. Pd 이온을 첨가하면 촉매의 밴드 갭이 감소하고, 광 생성된 전자와 정공 사이의 전하 분리가 쉽게 발생한다. 결과적으로, 0.75 mol% $Pd-TiO_2$ 촉매상의 페놀 광 분해 성능은 순수한 $TiO_2$보다 3배 더 높았는데, 이는 광 촉매 반응 중에 Pd 이온이 전자캡쳐 역할을 하여 일어난 결과로 여겨진다.