• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.97-102
• /
• 2002

The growth kinetics of intermetallic compound layers formed between the eutectic Sn-3.5Ag solder and the Cu and Ni/Cu pad by solid stateisothermal aging were examined. The interfacial reaction between the eutectic Sn-3.5Ag solder and the Cu and Ni/Cu pad was investigated at 70, 120, 150, $170^{\circ}C$ for various times. The intermetallic compound layer was composed of two phase: $Cu_6Sn_5$(${\varepsilon}-phase$) adjacent to the solder and $Cu_6Sn_5$(${\varepsilon}-phase$) adjacent to the copper and on solder/Ni pad the intermetallic compound layer was $Ni_3Sn_4$. Because the values of time exponent(n) have approximately 0.5, the layer growth of the intermetallic compound was mainly controlled by volume diffusion over the temperature range studied. The apparent activation energy for layer growth of total Cu-Sn($Cu_6Sn_5 + Cu_6Sn$), $Cu_6Sn_5$, $Cu_3Sn$ and $Ni_3Sn_4$ intermetallic compound were 64.82kJ/mol, 48.53kJ/mol, 89.06kJ/mol and 71.08kJ/mol, respectively.

• 마이크로전자및패키징학회지
• /
• 제9권2호
• /
• pp.1-9
• /
• 2002

실제 BGA패키지에서 Sn-Ag-(Cu) 솔더와 금속패드가 반응하여 생성된 금속간 화합물의 특성을 Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS)f) X-ray Diffractometer (XRD)를 사용하여 분석하였다. EDS로 분석한 결과를 보면 BGA 패키지에서 Sn-Ag-Cu 솔더와 Au/Ni/Cu 금속층간의 반응으로 생성된 금속간화합물은 $(Cu,Ni)_6Sn_5$로 예상되며 . Cu의 편석은 솔더와 Ni 층 사이에서 발견되었다. XRD 분석결과 Cu를 함유하고 있는 Sn-Ag-Cu 솔더와 Ni층 사이에서는 $\eta -Cu_6 Sn_5$ 타입의 금속간화합물이 분석되었으며 Sn-Ag 솔더와 Ni층 사이에서는 $Ni_3$Sn_4$가 분석되었다. 계면에 생성된 금속간화합물은 리플로 회수와솔더내의 Cu의 함량에 따라증가하였다

• 한국표면공학회지
• /
• 제22권1호
• /
• pp.3-9
• /
• 1989

The intermetallic compount formation, growth rections, and growth kinetices as functions of the aging temperaturess, time, and the condition of substarte have invedtigted in the Sn/Cu and Sn/Ni bimetal couples. The η'-phase (Cu6Sn5) and $\delta$-phase (Ni3Sn4) were only found to grow at 20 and $70^{\circ}C$in the Sn/Cu and Sn/Ni bimetallic coples repectively. Above that temperatures, all other compounds were formed in sequence of high Sn content plase and the metastable Cu41Sn11 was formed at agend $200^{\circ}C$. The ectivation energy for the growth of intermetallic compounds was 14.7Kxal/mole in the Sn/Cu interface and 26.7Kcal/mole in the Sn/Ni interface.

• 한국표면공학회지
• /
• 제22권2호
• /
• pp.47-54
• /
• 1989

The effects of intermetallic compound growt on the sheet resistance and soldreability as functions of the aging time, the temperature, and the conditions of substrates have been investi-gated in the electroplallic compound (mainy Cu6Sn5and Ni3Sn4) and the number of phase interface increased, the sheet resistance increased. Spread tests showed that the solderability was dereased with the intermetallic compounds growth and increased with the thickness of electroplated Sn. The surface morphology or agin size of the compound layer singificantly affect the solderability. The solderability of Sn/Ni system was superiot to Sn/Ni system was sperior to that of Sn/Cu system and the intermetallic compounds growth was solwer in the former system.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.487-492
• /
• 2002

The growth kinetics of intermetallic compound layers formed between eutectic Sn-58Bi solder and (Cu, electroless Ni-P/Cu) substrate were investigated at temperature between 70 and 120 C for 1 to 60 days. The layer growth of intermetallic compound in the couple of the Sn-58Bi/Cu and Sn-58Bi/electroless Ni-P system satisfied the parabolic law at given temperature range. As a whole, because the values of time exponent (n) have approximately 0.5, the layer growth of the intermetallic compound was mainly controlled by volume diffusion over the temperature range studied. The apparent activation energies of Cu$_{6}$Sn$_{5}$ and Ni$_3$Sn$_4$ intermetallic compound in the couple of the Sn-58Bi/Cu and Sn-58Bi/electroless Ni-P were 127.9 and 81.6 kJ/mol, respectively.ely.

• 마이크로전자및패키징학회지
• /
• 제29권2호
• /
• pp.81-89
• /
• 2022

비전도성 필름(non-conductive film, NCF)의 적용이 Cu/Ni/Sn-2.5Ag 미세범프의 금속간화합물(intermetallic compound, IMC) 성장 거동에 미치는 영향을 분석하기 위해 110, 130, 150℃의 온도 조건과 1.3×10⁵ A/cm²의 전류밀도 조건에서 실시간 열처리 및 electromigration(EM) 실험을 진행하였다. 그 결과, NCF 적용 유무와 열처리 및 EM 실험과 관계없이 Ni₃Sn₄ IMC 성장에 필요한 활성화에너지는 약 0.52 eV로 큰 차이는 보이지 않았다. 이는 Ni-Sn IMC의 성장속도가 Cu-Sn IMC 성장 속도보다 매우 느리며, 또한 Ni-Sn IMC의 성장 거동은 시간의 제곱근에 선형적으로 증가하므로 확산이 지배하는 동일한 반응기구를 가지며 NCF 적용에 따른 역응력(back stress)의 EM 억제 효과가 크지 않기 때문에 Ni₃Sn₄ IMC 성장에 필요한 활성화에너지는 차이가 나지 않는 것으로 판단된다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.88-93
• /
• 2003

무전해 Ni-P와 Sn의 반응 및 Ni-P의 결정화에 대한 P 함량의 영향을 세 가지 다른 조성의 Ni-P (P 4.6, 9, 13 $wt.\%$)를 이용하여 연구하였다. $300^{\circ}C$까지 열처리한 모든 시편에서 $Ni_3Sn_4$ intermetallic compound (IMC)가 생성되었고 이들 시편을 $450^{\circ}C$까지 열처리한 경우 Sn 두께가 $0.5{\mu}m$로 작을 때 $Ni_3Sn_4$가 모두 $Ni_3Sn_2$로 변화하였다. nanocrystal인 Ni-4.6P는 Ni (111) texture를 유지하며 결정화되었고 Sn과의 반응시 형성되는 $Ni_3Sn_4$ IMC 또한 비정질인 Ni-9P, Ni-13P 경우보다 강한 (111) texture를 가짐이 확인되었다. Ni-P 막의 P 함량이 작은 경우 $Ni_3Sn_4$ IMC는 두껍고 조밀하게 형성되는 반면 P-rich layer 두께는 작아졌다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.54-56
• /
• 2005

Ultrasonic soldering using of Si-wafer to FR-4 PCB atroom temperature was investigated. Sn3.5Ag foil rolled $100{\mu}m$ was used for solder. The UBM of Si-die was Cu/ Ni/ Al from top to bottom and its thickness was $0.4{\mu}m$, $0.4{\mu}m$, $0.3{\mu}m$ respectively. Pad on FR-4 PCB comprised of Au/ Ni/ Cu from top to bottom and its thickness was $0.05{\mu}m$, $5{\mu}m$, $18{\mu}m$ respectively. The ultrasonic soldering time was changed from 0.5sec to 3.0sec and its power 1400W. As experimental result, reliable bond joint by ultrasonic at room temperature was obtained. The shear strength increased with soldering time up to 2.5 sec. That means at 2.5sec, the shear strength showed maximum rate of 65.23N. The strength decreased to 33.90N at 3.0 sec because the cracks generated along the intermetallic compound between Si-wafer and Sn-3.5mass%Ag solder. intermetallic compound produced by ultrasonic between the solder and the Si-die was $(Cu, Ni)_{6}Sn_{5}$ and the intermetallic compound between solder and pad on FR-4 was $(Ni, Cu)_{3}Sn_{4}$.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.41-46
• /
• 2005

무전해 Ni(P)과 솔더와의 반응 중 발견되는 취성파괴 현상과 계면 화학반응시의 금속간화합물 spalling과의 연관성을 전단 파괴실험을 통하여 체계적으로 연구하였다. 취성파괴는 무전해 Ni(P)과 Sn-3.5Ag 솔더와의 반응 후에만 나타났고 Sn-3.0Ag-0.5Cu 솔더와의 반응시에는 연성파괴만이 관찰되었다. Sn-3.0Ag-0.5Cu 솔더와의 반응시 $(Ni,Cu)_3Sn_4$와 $(Cu,Ni)_6Sn_5$의 삼성분계 금속간화합물이 생성되었고 spatting은 발생하지 않았다. 반면, Sn-3.5Ag 솔더와의 반응시에는 $Ni_3Sn_4$ 금속간화합물이 spatting된 솔더패드에서 취성파괴가 발생하였다. 파괴표면을 면밀히 분석한 결과 취성파괴는 $Ni_3Sn_4$ 금속간화합물과 Ni(P) 금속층 사이에 형성된 $Ni_3SnP$ 층에서 발생하는 것을 알 수 있었다. $Ni_3SnP$ 금속간화합물 층은 $Ni_3Sn_4$ 금속간화합물이 spatting되는 과정 중에 두껍게 성장하므로 무진해 Ni(P) 사용시 기계적 신뢰성을 보장하기 위해서는 금속간화합물의 spatting을 방지하는 것이 매우 중요하다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.708-711
• /
• 1999

The Cu/Ni/Au lamellar structure is extensively used as an under bump metallization on silicon file, and on printed circuit board(PCB) pads. Ni is plated Cu by either electroless Ni plating, or electrolytic Ni plating. Unlike the electrolytic Ni plating, the electroless Ni plating does not deposit pure Ni, but a mixture of Ni and phosphorous, because hypophosphite Is used in the chemical reaction for reducing Ni ions. The fracture crack extended at the interface between solder balls of plastic ball grid (PBGA) package and conducting pads of PCB. The fracture is duets to segregation at the interface between Ni$_3$Sn$_4$intermetallic and Ni-P layer. The XPS diffraction results of Cu/Ni/Au results of CU/Ni/AU finishs showed that the Ni was amorphous with supersaturated P. The XPS and EDXA results of the fracture surface indicated that both of the fracture occurred on the transition lesion where Sn, P and Ni concentrations changed.