• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.118-118
• /
• 2003

편의와 fresh-like quality를 선호하는 소비 경향에 맞추어 가공한 fresh-cut사과의 선도 연장을 위한 저해제를 탐색하였다. 실험에 사용된 사과는 박피하여 속심을 제거한 사과를 8조각으로 절단하여 저해제에 3분간 침지한 후 물기를 제거하고 각각 LDPE 포장지에 포장하여 실온에서 저장하면서 colorimeter와 rheometer를 이용하여 색도와 물성을 측정하였다. 저해제로는 1% ascorbic acid, citric acid, NaCl, MgCl$_2$, CaCl$_2$, KCl, CaSO$_4$, MgSO$_4$, $Na_2$SO$_4$, oxalic acid, calcium lactate, calcium citrate를 사용하였으며 천연저해제로는 건칡, 맥문동, 목향, Rhubarb, 당귀, 오약, 시체, 지각, 천문동, 청피, 계피, 구기자, 당귀, 진피, 감초, 녹차, 후추 등을 열수추출하여 사용하였다. 물리적인 변화는 시간이 경과함에 따라 감소하는 추세를 보였으며 일부 건조로 인해 texture의 증가를 나타내기도 했다. 처리에 따른 물리적인 변화로는 CaCl$_2$, NaSO$_4$, Cl, 시금치를 처리하였을 때 그 변화가 가장 작았으나 시금치의 경우 시금치로 인한 사과의 색변화로 관능적으로 좋지 않았다. 한약재는 목향, 당귀, 지각, 계피를 처리하였을 때 물리적인 변화가 가장 작았으나 시금치와 마찬가지로 처리 초기에 한약재 자체의 향과 색으로 인하여 관능적으로 좋지 못한 결과를 나타냈다. 갈변 정도를 나타내는 ΔE의 변화는 KCl과 CaCl$_2$, CaSO$_4$를 처리한 구에서 변화가 가장 작았으며 한약재를 처리하였을 경우 당귀, 천문동을 처리한 구에서 효과를 보였다. oxalic acid는 갈변저해에는 효과적이었으나 시간이 경과함에 따라 수분의 용출이 증가하였으며 물성의 변화도 컸다. 또한 ZnCl$_2$를 처리한 구에서는 이취 발생과 수분 용출이 컸으며 색의 변화도 컸다.

• Journal of Korean Society of Forest Science
• /
• v.77 no.3
• /
• pp.294-302
• /
• 1988

The experiment was carried out to investigate the properties of bark extractives form Larix epilepsies and to evacuate their suitability as a bonding agent. The yield and reactivity were measured to examine the influence of temperature and time and the effect of carbonation and sulfonation. To define the possibility of practical application as wood adhesives the viscosity and gelation time were measured at 33% concentration. The results obtained were summarized as follows : 1. As the both yield and reactivity were high, extraction for 2 hours at $80^{\circ}C$ was the optimal temperature and time. 2. The highest effect achieved at 1% $Na_2CO_3$ about carbonation and 1% $Na_2SO_3$ : $NaHSO_3$ and 0.25% $Na_2SO_3$ about sulfonation. The sulfonation of 0.25% $Na_2SO_3$ increased the yield and reactivity most highly. 3. By using hot water as extraction liquid the yield was 17.2%, while the addition of 1% and 5% NaOH to the extraction liquid increased the yield to 38.6% and 44.6%, respectively. 4. Hot water extracts showed the highest reactivity(68.8%). The addition of 1% and 5% NaOH led to decrease in reactivity(49.3% and 25.8%, respectively). 5. At 33% concentration of the extracts the viscosity appeared very variable. Significantly high values of viscosity was measured in 1% NaOH solution, while very low values appeared for 5% NaOH solution. 6. The shortest gelation time was determined at pH 7 to 10 and the highest at pH 4. The use of paraformaldehyde resulted in gelation times longer than those of 37% formaldehyde solution. 7. Except the sulfonation extracts of hot water and 1% NaOH, the other extracts were found unsuitable due to high viscosity(1% NaOH extracts, sulfonation extracts) or to curing inability(5% NaOH extracts, sulfonation extracts of 5% NaOH). 8. From the three extract solutions which appeared to be suitable for use as bonding agents the hot water extracts and the sulfonation extracts of hot water were superior in extract reactivity, while the sulfonation extracts of 1% NaOH exceeded the other two extracts in extract yield.

• Journal of the Korean institute of surface engineering
• /
• v.13 no.1
• /
• pp.8-15
• /
• 1980

The critical voltage of hard coat range of Al alloys (K 186, 43S) at various electrolytes and the effects of voltage, temperature of electrolytes and concentration of sulfric acid were investigated, m the hope that to find the adequate voltage. Two kind of A1 alloys were anodized in three typical electrolytes and micro vickers hardness of the films were measured. With respect to the relationship between the hardness of the film and the voltage The result of this experiment are as fallows. 1. The critical voltage of hard coat rangs for the electrolytes $H_2SO_4\;10%,\;H_2SO_4\;10%\;+\;H_2C_2O_4\;2H_2O\;10g/l,\;H_2SO_4\;10%\;+\;NaHSO_4\;5%$ was 20V 22V 24V respectively. 2. $H_2SO_4\;10%\;+\;NaHSO_4$ 5% electrolyte was most adventageous among the three electrolyte in the respect of hardness. 3. The effect of concentration of sulphuric acid was not appeared.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1104-1108
• /
• 1999

In this study it was focused that if the chrome could be removed in the shaving dust, the reusable protein resource could be recycled from the shaving dust. As the chrome forms a Cr-collagenate by cross linking of collagen in the shaving dust, the dust was steeped for swelling and plumping by $Ca(OH)_2$ solution and then chromium in dust was resolved out by $H_2SO_4$ solution in the first stage process. In the second stage one, dust was swelled and plumped by NaOH solution and then the chromium in dust was oxygenated to a hexavalent chrome, which has high solubility in $H_2O_2$ solution. And then the chromium was removed byt he steeping of $H_2SO_4$ solution as the last process. The first stage process was consisted of the sequential steeping of 3%-$Ca(OH)_2$ and $0.8%-H_2SO_4$. In the second stage the total chrome was effectively removed by the sequential steeping of 0.1%-NaOH, $3%-H_2O_2$ and $1%-H_2SO_4$. In the completely dechromated dust, the humidity was measured as 10.68% and the crude protein was contained by 79.81%. Steeping solutions were reused 3 times for chrome removal process, the chrome was entirely removed in shaving dust.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.6
• /
• pp.965-971
• /
• 2001

To estimate the reliability of 12Cr alloy steel, the material of turbine blade in the steam power plant, Its corrosion susceptibility and fatigue characteristics in NaCl and Na$_2$SO$_4$solution with the difference of concentration and temperature was investigated. The polarization tests recommended in ASTM G5 standard for corrosion susceptibility in the various corrosive solutions was estimated. It showed that the higher temperature, the faster corrosion rates and corrosion rates were the fastest in 3.5 wt.% NaCl and 1M Na$_2$SO$_4$solution. From these results, the degradation conditions were determined in distilled water, 3.5 wt.% NaCl and 1M Na$_2$SO$_4$solution at room temperature, 60$\^{C}$ and 90$\^{C}$ during 3, 6 and 9 months. Its surface had a few pits for long duration. But, it was not susceptible in sulfide and chloride condition of several temperatures. If the degraded 12Cr alloy steel and non-degraded one were compared with fatigue characteristics, Any differences were not found regardless of temperature and degradation period.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.535-544
• /
• 2013

Influence of sulfate on the early hydration in the solidification treatment of abandoned mine tailings was characterized. Solidified specimens using hydrated lime as a binder were prepared with various amounts of added $Na_2SO_4$ and different curing days. Unconfined compressive strength measurement, heavy metal leaching test, XRD analysis were performed after 7-, 14- and 28-days curing. According to curing days strength of solidified specimens using only distilled water increased but those with addition of $Na_2SO_4$ decreased. External cracks of specimens developed definitely with increasing $Na_2SO_4$ concentration and curing days. Concentrations of Cu, Cd, Zn, and As in the leached solutions from solidified specimens decreased significantly but Pb was leached readily in cases of hydrated lime dosage more than 10 wt%. Gypsum and $MgSO_4$ were identified in the cracked solidified specimens by XRD analysis, and pillar-shaped crystals of SEM image were identified as gypsum in reference with EDS analysis. Crystallization of sulfate in the process of lime-tailing solidification caused cracking, which should be supplemented for solidification treatment of highly sulfur-contained tailing.

• Membrane Journal
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2014

To prepare the hollow fiber nanofiltration composite membranes, the poly(vinylidene fluoride) (PVDF) membrane was hydrophilized with $K_2Cr_2OH$ and $KMnO_4$ aqueous solutions. And then the composite membrane was synthesized on that membrane surfaces using interfacial polymerization with piperazine (PIP) and trimesoyl chloride (TMC). The resulting membranes were characterized in terms of the rejection and flux for NaCl, $CaSO_4$, $MgCl_2$ 100 ppm solution and 300 ppm of NaCl and $CaSO_4$ mixed solution by varying the coating time, drying time, and the concentration of the coating materials. As a result, the higher rejections were shown for $K_2Cr_2OH$ solutionas a hydrophilization material, and the flux was enhanced while the rejection reduced as the hydrophilization time is longer. Also, the rejection increased and the flux reduced as the concentrations of triethyl amine (TEA) and sodium lauryl sulfate (SLS) were higher. Typically, the rejection 50% and flux 40 LMH for NaCl 100 ppm solution, and the rejection 55% and flux 48 LMH for $CaSO_4$ 100 ppm solution were obtained for the PVDF hollow fiber composite membrane prepared with the conditions of PIP 2 wt% (Triethyl amine (TEA) 7 wt%, SLS 20 wt% mixed solution against PIP concentration) and TMC 0.1 wt%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.6
• /
• pp.631-642
• /
• 1998

Fall-out particles were collected by the modified British deposit gauges at 35 sampling sites in Suwon area from January to November, 1996. Twenty chemical species (Al. Ba, Cd, Cr, K, Pb, Sb, Zn, Cu, Fe, Ni, V, F-, Cl-, NO3-, 5042-, Na+, NH4+, Mg2+, and Ca2+) were analyzed by AAS and If. The purposes of this study were to estimate qualitatively various emission sources of the fell-out particle by applying multivariate statistical techniques such as factor analysis, multiple regression analysis, and discriminant analysis. During the study, outlier sites were determined by a z-score method. Cl-, Na+, Mg2+, and SO42- were highly correlated due to their common marine related source. Wind speed was the most influential factor for the deposition fluxes of the particle itself and all the chemical species as well. When applying the factor analysis, 8 source patterns were qualitatively obtained, such as marine source, soil source, oil burning source, Cr related source, tire source, Cd related source, agriculture source, and F- related source. As a result of the multiple regression analysis, we could suggest that some chemical compounds may possibly exist in the form of CaSO4, NaN03, NaCl, MgC12, (NH4)2SO4, NaF, and CaCl2 in the fall-out particles. Finally, spatial and seasonal classification study performed by a discriminant analysis showed th.at SO42-, Ca2+, Cl-, and Fe were dominant in the group of spatial pattern; however, SO42-, Cl-, Al, and V were in the group of seasonal pattern.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.42-47
• /
• 2013

Ferro-Nickel slag is a byproduct of Ferro-Nickel manufacturing process. Ferro-Nickel slag mostly discarded or used as aggregates despite having useful ingredients such as magnesium oxide and silicon oxide. This study tried to extract process for Mg ion using $H_2SO_4$ solution. And remove impurities and get high purity $Mg(OH)_2$ using NaOH. Mg ion was extracted with the Fe ion and other Ferro-Nickel slag composition by $H_2SO_4$ solution. It is important to control the pH because remove impurities and obtain high-purity $Mg(OH)_2$. The impurities were removed by precipitation of the hydroxides. After this process, we added NaOH and high-purity $Mg(OH)_2$ was obtained.

• Carbon letters
• /
• v.18
• /
• pp.43-48
• /
• 2016

Sulphonated polysulphone (SPS) has been synthesized and subsequently applied as binder for graphene oxide (GO)-based electrodes for development of electrochemical supercapacitors. Electrochemical performance of the electrode was investigated using cyclic voltammetry in 1M Na₂SO₄ and 1M KOH solution. The fabricated supercapacitors gave a specific capacitance of 161.6 and 216.8 F/g with 215.4 W/kg and 450 W/kg of power density, in 1M Na₂SO₄ and 1M KOH solutions, respectively. This suggests that KOH is a better electrolyte than Na₂SO₄ for studying the electrochemical behavior of electroactive material, and also suggests SPS is a good binder for fabrication of a GO based electrode.