• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.1
• /
• pp.39-46
• /
• 1999

This study was performed to examine the effect of initial composition ratio and various reaction conditions on CEC and crystallinity of the product in hydrothermal synthesis of zeolitic materials from fly ash. Na-P1 zeolite was formed from the mixture with $SiO_2/Al_2O_3$ ratio above 2.55, however from the mixture with $SiO_2/Al_2O_3$ ratio below 2.25 hydroxy sodalite was formed. The CEC of reaction product(Na-P1 zeolite) treated with 3N-NaOH, $Na_2O/Al_2O_3$ ratio 2.55 and $SiO_2/Al_2O_3$ ratio 2.0 for 12 hours at $103^{\circ}C$ was about $285cmol^+kg^{-1}$, which was higher than those of the products of other reaction condition. The crystallinity of Na-P1 zeolite as high as 45.1% was attained at the optimum reaction condition of 2N-NaOH, $SiO_2/Al_2O_3$ ratio 2.55, $Na_2O/Al_2O_3$ ratio 1.5 for 12 hours at $103^{\circ}C$. The XRD peak of the reaction product could be measured at 7.16, 5.04, 4.12, 3.18, $2.69{\AA}$ and tetragonal pillar shape observed by SEM image be characteristic for Na-P1 zeolite. Judging from the result, it should be considered the optimum synthesis condition for Na-P1 zeolite from fly ash was 2~3N NaOH, $SiO_2/Al_2O_3$ ratio 2.55 and $Na_2O/Al_2O_3$ ratio 1.5~2.0 for 12 hours at $80{\sim}103^{\circ}C$.

• Journal of Mushroom
• /
• v.2 no.1
• /
• pp.4-9
• /
• 2004

This study was carried out to investigate effect of NaCl treatment on growth oyster mushroom and Trichoderma spp. on PDA and in rice straws. We also investigated the possibility of oyster mushroom cultivation using rice straw harvested from the reclaimed land having been drained sea water. Mycelial growth of oyster mushroom was increased by treatment of 0.2% NaCl but decreased by treatment of the higher concentration of NaCl. In the case of the mycelial growth on PDA of Trichoderma spp., no change was found in 0.5%~1.0% NaCl, but decreased in the range of 1.0%~3.0% NaCl and drastically decreased at 5.0% NaCl. In the rice straws treated with different concentration of NaCl solution, mycelial growth of oyster mushroom showed almost same result compare to PDA. The spore formation of Trichoderma mould was almost same in both 0% and 0.3% NaCl, decreased in 0.5% and was not found spores in the higher concentration of NaCl. As increasing salt concentration in the rice straws, the NaO contents were increased. The $K_2O$ contents were decreased before and after sterilization. The moisture content of rice straws showed no difference by treatment of 3.0% NaCl but decreased the moisture by treatment of 5.0% NaCl. No pH change was found in the rice straws treated with NaCl. Mushroom yield in the rice straw of reclaimed land was a little higher than that of normal paddy land straw. The duration of primordium formation was not affected by NaCl concentration in rice straws. The yield of fruiting body in 0.3% NaCl treatment was 2,700kg, which was almost same to non-treated plot, but decreased in 0.5% NaCl. EC value of soaking water after submerging rice straw was higher than before, but NaO content was not changed at both condition.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.45-52
• /
• 2019

$TiO_2$ as a raw material for producing titanium can be produced by carbon reduction of natural ilmenite ores over 1823 K and acid leaching of the obtained titanium-rich slag. However, the conventional process can cause very high energy consumption and a large amount of leaching residues. In the present study, we proposed the sulfurization of $FeTiO_3$ with $Na_2SO_4$ at temperatures below 1573 K, which can separate Fe in $FeTiO_3$ as the FeS based sulfide phase and Ti as the $TiO_2-Na_2O$ based oxide phase. This study is a fundamental study for sulfurization of $FeTiO_3$ to investigate the influence of reducing atmosphere, reaction temperature and the sulfur/Fe ratio on the separability and distribution behaviors of of Fe, Ti, and Na between the oxide phase and the sulfurized phase. At 1573 K and carbon saturation condition, the Fe can be separated from $FeTiO_3$ as Fe-C-S metal and a part of FeS, and the concentration of Fe in oxide decreased to 4 mass% after sulfurization.

• Elastomers and Composites
• /
• v.34 no.1
• /
• pp.3-10
• /
• 1999

Kinetics of solution photopolymerization of acrylonitrile(AN) with sensitizer, such as $NaSCN,\;KSCN,\;Ba(SCN)_2,\;NH_4SCN,\;ZnCl_2$ and $Na_2SeO_3$, were studied using UV crosslinker at various monomer concentrations($1.8{\sim}7.58mo1/1$), sensitizer concentrations($10{\sim}60%$), reaction temperature($10{\sim}70^{\circ}C$), energy intensities($1,000{\sim}9,900{\mu}J/cm^2$) at isothermal condition under nitrogen atmosphere. Under the irradiation of high pressure mercury lamp(${\lambda}=365nm$). High conversion and uniform molecular weight were obtained compare to thermal polymerization at reaction temperature of $50^{\circ}C$, reaction time of 3hr and 50% NaSCN without any initiator. Their kinetic model was as follows : $R_p=0.0142[M]^{0.82}[I]^{0.49}[S]^{0.52}$ exp(-1.33/RT).

• Journal of the Korean institute of surface engineering
• /
• v.57 no.2
• /
• pp.86-91
• /
• 2024

In this study, we investigated the effect of Na₂SiO₃ concentration on the Plasma Electrolytic Oxidation(PEO) film formation of Al6061 alloy. The morphology of the PEO films were examined by Optical Microscope(OM) and Scanning Electron Microscope(SEM). PEO film thickness increases as the Na₂SiO₃ concentration increases. The elemental analysis of PEO films was conducted using Dispersive X-ray Spectrometer(EDS). The cross-sectional elemental analysis result shows that the Si concentration tends to increase as the concentration of Na₂SiO₃ increases. X-Ray Diffraction(XRD) analysis was performed to confirm the degree of phase change according to Na₂SiO₃ concentration. In addition, Vickers hardness was measured to confirm the mechanical strength of the PEO film. As the concentration of Na₂SiO₃ increases, the hardness value also tends to increase.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.2
• /
• pp.113-119
• /
• 2000

An experimental study has been carried out in order to investigate on a particle deposition on a circular cylinder surface. The present study is focused on the particulate fouling occurring in a heat exchanger for a seawater desalinization, in a laminar flow over circular cylindrical tubes. The objective is to investigate how NaCl concentration influences the $SiO2$ particle deposition on the surface of a glass circular cylinder. The NaCl concentration was changed from 0 g/L to 40 g/L. As the experimental results of $SiO2$ particle which is deposited on the glass circular cylinder surface showed, particle deposition rate per unit time increases rapidly with the increase of NaCl concentration between 0 g/L and 15 g/L. After the maximum of particle deposition rate was found at the NaCl concentration of 15 g/L, particle deposition rate remains unchanged or decreases gradually with the NaCl concentration from 15 g/L to 40 g/L. Also the $SiO2$ deposition rate of particles does not have serious variations with the position at present glass surface.

• Korean Journal of Poultry Science
• /
• v.20 no.3
• /
• pp.125-131
• /
• 1993

This study was performed to find the desirable conditions for processing salted hard-boiled egg without cracking egg shell in NaCl solution under pressure. Among the many factors affecting saltiness of the shell egg, concentration of NaCl solution(0~40%), different salting time(0~45h) and salting pressure (0~4.5kg/$\textrm{cm}^2$) were employed to identify the permeability of NaCl into shell egg at ambient temperature. The saltiness of the shell egg was proportionally risen as concentration of NaCl solution, salting time and pressure increased. The most desirable saltiness was observed at the 0.70~1.00% of NaCl in albumen and 0.40~0.45% in yolk, Besides the saltiness, sensory evaluation of the shell egg were carried out to evaluate the quality of the salted shell egg. The effect of various concentration of NaCl solution, salting time and pressure on sensory scores of hard-boiled salted eggs showed that 20~40% of NaCl solution, 12~20 h of salting time, 3~4.5 kg/$\textrm{cm}^2$ of salting pressure were proper conditions for processing the product. These results indicate that the desirable condition to get salted hard-boiled shell egg were ; 30% of NaCl solution, 16h of salting time and 4.0kg/$\textrm{cm}^2$ of salting pressure.

• Journal of the Mineralogical Society of Korea
• /
• v.3 no.1
• /
• pp.7-17
• /
• 1990

화산 유리질 암석을 출발 물질로 사용하여 저온 ($80^{\circ}C$)에서 수열 처리하여 Na-P Na-X 및 Na-A 제올라이트를 합성하였다. 합성과정은 (1) 유리질 분말 시료와 알칼리 용액과의 용해.변질 반응에 의한 1차적인 Na-P의 합성 방식과 (2) 여기서 잔류된 규산질 모액에 Al(OH)3나 NaAlO2의 수용액을 공급하여 보다 고순도의 Na-P, Na-X 및 Na-A를 효과적으로 합성할 수 있었다. 원암의 암상과 조성은 제올라이트들의 화학 조성과 순도 및 백색도같은 물리적 특성에는 영향을 주지만, 합성된 제올라이트의 광물종을 규제하는 주된 요인은 아닌 것으로 해석된다. 합성된 제올라이트의 광물상은 반응 용액의 pH, Al(OH)4 및 Na+에 대한 농도 조건에 주로 의존되는 경향을 나타낸다. 또한 화산 유리질 암석을 제올라이트 합성원료로 활용하는 데에 있어서 (2)와 같음 합성 방안이 보완적으로 시행되면 그 생산성과 효율성을 제고시킬 수 있을 것으로 여겨진다.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.391-405
• /
• 2003

The Daebong gold-silver deposit consists of mesothermal massive quartz veins thar are filling the fractures along fault shear (NE, NW) Bones within banded or granitic gneiss of Precambrian Gyeonggi massif. Based on vein mineralogy, ore textures and paragenesis, ore mineralization of this deposits is composed of massive white quartz vein(stage I) which was formed in the same stage by multiple episodes of fracturing and healing, and transparent quartz vein(stage II) which is separated by a major faulting event. Stage I is divided into the 3 substages. Ore minerals of each substages are as follows: 1) early stage I=magnetite, pyrrhotite, arsenopyrite, pyrite, sphalerite, chalcopyrite, 2) middle stage I=pyrrhotite, arsenopyrite, pyrite, marcasite, sphalerite, chalcopyrite, galena, electrum and 3) late stage I=pyrite, sphalerite, chalcopyrite, galena, electrum, argentite, respectively. Ore minerals of the stage II are composed of pyrite, sphalerite, chalcopyrite, galena and electrum. Systematic studies (petrography and microthermometry) of fluid inclusions in stage I and II quartz veins show fluids from contrasting physical-chemical conditions: 1) $H_2O-CO_2-CH_4-NaCl{\pm}N-2$ fluid(early stage I=homogenization temperature: 203∼3$88^{\circ}C$, pressure: 1082∼2092 bar, salinity: 0.6∼13.4 wt.%, middle stage I=homogenization temperature: 215∼28$0^{\circ}C$, salinity: 0.2∼2.8 wt.%) related to the stage I sulfide deposition, 2) $H_2O-NaCl{\pm}CO_2$ fluid (late stage I=homogenization temperature: 205∼2$88^{\circ}C$, pressure: 670 bar, salinity: 4.5∼6.7 wt.%, stage II=homogenization temperature: 201-3$58^{\circ}C$, salinity: 0.4-4.2 wt.%) related to the late stage I and II sulfide deposition. $H_2O-CO_2-CH_4-NaCl{\pm}N_2$ fluid of early stage I is evolved to $H_2O-NaCl{\pm}CO_2$ fluid represented by the $CO_2$ unmixing due to decrease in fluid pressure and is diluted and cooled by the mixing of deep circulated meteoric waters ($H_2O$-NaCl fluid) possibly related to uplift and unloading of the mineralizing suites. $H_2O-NaCl{\pm}CO_2$ fluid of stage II was hotter than that of late stage I and occurred partly unmixing, mainly dilution and cooling for sulfide deposition. Calculated sulfur isotope compositions ({\gamma}^{34}S_{H2S}$) of hydrothermal fluids (3.5∼7.9%o) indicate that ore sulfur was derived from mainly an igneous source and partly sulfur of host rock. Measured and calculated oxygen and hydrogen isotope compositions ({\gamma}^{18}O_{H_2O}$, {\gamma}$D) of ore fluids (stage I: 1.1∼9.0$\textperthousand$, -92∼-86{\textperthansand}$, stage II: 0.3{\textperthansand}$, -93{\textperthansand}$) and ribbon-banded structure (graphitic lamination) indicate that mesothermal auriferous fluids of Daebong deposit were two different origin and their evolution. 1) Fluids of this deposit were likely mixtures of $H_2O$-rich, isotopically less evolved meteoric water and magmatic fluids and 2) were likely mixtures of $H_2O$-rich. isotopically heavier $\delta$D meteoric water and magmaticmetamorphic fluids.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.80-84
• /
• 2018

Mg alloys AZ31 and AZ91 were Plasma-Electrolytic-Oxidized in Na-P and Na-Si system electrolyte at various concentration, applied voltage and time. Thickness and surface roughness of PEO coating were examined. Salt spraying test were carried out to compare their corrosion resistances. Generally, corrosion resistances rate were increased as thickness and crystallinity increasing. Size of pore being larger, long term corrosion resistance decreased. It is turned out that $Mg_2SiO_4$ and other crystalline phase rather than MgO might be increase corrosion resistance dramatically.