• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.478.1-478.1
• /
• 2014

We investigated $MoO_3$ graded ITO electrodes for organic solar cells (OSCs) without PEDOT:PSS buffer layer. The effect of $MoO_3$ thickness on the electrical, optical, and structural properties of $MoO_3$ graded ITO anodes prepared by RF/DC magnetron co-sputtering system using $MoO_3$ and ITO targets was investigated. At optimized conditions, we obtained $MoO_3$ graded ITO electrodes with a low sheet resistance of 13 Ohm/square, a high optical transmittance of 83% and a work function of 4.92 eV, comparable to conventional ITO films. Due to the existence of $MoO_3$ on the ITO electrodes, OSCs fabricated on $MoO_3$ graded ITO electrode without buffer layer successfully operated. Although OSCs fabricated on ITO anode without buffer layer showed a low power conversion efficiency of 1.249%, OSCs fabricated on $MoO_3$ graded ITO electrode without buffer layer showed a outstanding cell performance of 2.545%. OSCs fabricated on the $MoO_3$ graded ITO electrodes exhibited a fill factor of 61.275%, a short circuit current of 7.439 mA/cm2, an open circuit voltage of 0.554 V, and a power conversion efficiency of 2.545%. Therefore, $MoO_3$ graded ITO electrodes can be considered a promising transparent electrode for cost efficient and reliable OSCs because it could eliminate the use of acidic PEDOT:PSS buffer layer.

• 대한화학회지
• /
• 제30권4호
• /
• pp.345-351
• /
• 1986

아세톤수용액에서 한개의 산소가 다리로된 이핵물리브덴(V)착물인 $[Mo_2O_3(bipy)_2(NCS)_4]$는 이옥소다리이핵몰리브덴(V)착물인 $MoO_4(bipy)_2(NCS)_2$를 생성한다. $[Mo_2O_3(bipy)_2(NCS)_4]$에서 $MoO_4(bipy)_2(NCS)_2$로 바꾸어 지는 속도는 분광광도법으로 측정하였다. 용매 물과 이옥소다리이핵몰리브덴(Ⅴ)착물의 생성속도는 속도법칙, 속도= k$[Mo_2O_3(bipy)_2(NCS)_4]\;[H_2O]$에 따른다. 이옥소다리착물의 생성반응메카니즘에 대해서 논의된다. 관찰된 음의 활성화부피는 착물이 용매분자를 전이상태에서 강하게 당길 것으로 보인다.

• 대한화학회지
• /
• 제14권2호
• /
• pp.141-145
• /
• 1970

The reduction of Mo-thiocyanate (V) complex on dropping mercury electrode has been studied at ionic strength 0.6 with pH less than 2.3. D-C polarogram obtained from acidic solutions are reversible, diffusion controlled current. The electrode reaction of Mo-thiocyanate(V) may be represented as follows. $MoO(SCN)_3\;+\;2H^+\;+\;2e\;{\to}\;Mo(SCN)_2{^+}\;+\;H_2O\;+\;SCN^-$From this reaction, the half wave potential assumed to be $E_{1/2}\;=\;E_0'\;-\;0.059\;pH\;-\;0.03\;log{\;frac{[Mo(SCN)_2{^+}][SCN^-]}{[MoO(SCN)_3]}}$Considering the dissociation of this complex, however, it was estimated that the electrode reaction may be written by. $MoO^{+3}\;+\;3SCN^-\;+\;2H^+\;+\;2e\;{\to}\;Mo(SCN)_2{^+}\;+\;SCN^-\;+\;H_2O$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.232-235
• /
• 1999

In this paper, We described the effect of $MoO_3$ Addition and firing temperature on the microwave dielectric properties of $BiNb0_4$ ceramics. The specimens prepared by conventional mixed method was addicted by 0 - 0.03 wt% $MoO_3$ and fired at 860 - $950^{\circ}$ for 3hr. Density increased when $MoO_3$ is below O.Olwt% but decreased when over O.Olwt%. $BiNb0_4$ ceramics addicted with CuO 0.03wt % and $MoO_3$ 0.01 wt% showed microwave dielectric properties, Dielectric constant 37.5, Quality factor[Qx$f_0$]5500, Temperature coefficient of resonance frequency 15ppm/$^{\circ}$

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.94-97
• /
• 2002

Phase transitions of the $Sm_{2}(MoO_{4})_{3}$ single crystal were studied through thermal analysis, x-ray methods and SEM/EDS. $Sm_{2}(MoO_{4})_{3}$ undergoes the ferroelastic and ferroelectric phase transition at $198^{\circ}C$. With increasing temperature, the second phase transition occurs at $928^{\circ}C$. From TG analysis, the mass loss of $Sm_{2}(MoO_{4})_{3}$ exhibits an anomalous behavior at about $650^{\circ}C$ and the curves increased monotonically to $1132^{\circ}C$. SEM and EDS show that the escape of ${MoO_{4}^{2-}$ tetrahedra from the lattice of $Sm_{2}(MoO_{4})_{3}$ increase above $928^{\circ}C$, so $Sm_{2}(MoO_{4})_{3}$ has a very rough surface and internal cracks.

• 자원리싸이클링
• /
• 제31권1호
• /
• pp.29-36
• /
• 2022

수평관상로를 사용하여 산화몰리브덴의 수소환원거동을 연구하였으며, 환원은 MoO₃ → MoO₂과 MoO₂ → Mo의 두 단계로 진행되었다. 첫 번째 단계에서는 높은 발열반응을 고려하여 MoO₃ 환원을 위해 30 vol% H₂와 70 vol% Ar의 혼합 가스를 선택하였다. 온도 범위는 550~600℃이고 체류 시간 범위는 30~150분으로 진행하였다. 두 번째 단계에서는 MoO₂의 환원을 위해 순수한 H₂ 가스를 사용하였으며, 온도와 체류시간의 범위는 각각 700~750℃와 30~150분이었다. 몰리브덴 산화물의 두 단계의 수소환원과정에서 각각 다른 환원거동이 관찰되었다. 1단계에서는 반응속도의 온도 의존성이 관찰되었으며, 본 연구의 조건에서 중간 산화물의 존재에도 불구하고 표면반응율 속 메커니즘이 결과와 잘 일치하는 것으로 나타났다. 이 메커니즘을 기반으로 활성화 에너지와 빈도인자는 각각 85.0 kJ/mol 및 9.18×10⁷로 계산되었다. 또한, 입자 내 기공 크기는 온도 및 체류 시간에 따라 증가했다. 2단계 환원의 경우 반응속도의 온도 의존성이 관찰되었으나 표면반응율속 메커니즘은 초기에만 부합하였다. 이는 환원과정 후반부에 상변태 MoO₂→ Mo가 진행됨에 따라 부피 변화에 의한 산화물 결정구조의 붕괴에 기인한다고 생각할 수 있다.

• 한국대기환경학회지
• /
• 제8권1호
• /
• pp.58-67
• /
• 1992

For removing $NO_x$ and $SO_x$ from the flue gases emitted from stationary sources, $V_2O_5-MoO_3/TiO_2$ catalysts were prepared by the conventional impregnation method (aqueous solution) and a sort of surface fixation method(nonaqueous solution) as reported excellent reproducibility catalysts. And these catalysts observed their catalytic activities as well as their surface properties. V-Mo-O oxide, prepared from nonaqueous solution of $VOCl_3$ and $Mo(CO)_6$ and aqeous solution method, was supported as amorphous state by XRD and SEM measurements. The infrared spectra of fresh and used catalysts showed that in used catalysts, V=O bands decreased and new bands of vanadium oxysulfate bands were very sensitive. So the catalysts prepared from nonaqueous solution may bring about the high activity. Results from catalytic activity measurements at 350$^\circ$C, in the presence of $SO_2, NO$ conversion was more increased than in absence of $SO_2$. As the $MoO_3$ was added to $V_2O_5/TiO_2 system, SO_2$ conversion increased. It found that from the results, $V_2O-5-MoO_3/TiO_2$ catalysts prepared from an nonaqueous solution may bring about the high activity for both the reaction of NO and $SO_2$ removal.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1144-1147
• /
• 1999

광 변조량, 광학밀도, 응답시간, 순환전위전류특성을 조사하여 열처리 효과에 따른 $\textrm{MoO}_3$박막의 일렉트로크로믹 특성을 연구하였다. XRD 분석 결과 as-deposited $\textrm{MoO}_3$박막과 $350^{\circ}C$ 이하로 열처리된 박막은 비정질로 밝혀졌으며, $450^{\circ}C$에서열처리한 $\textrm{MoO}_3$박막은 결정질로 나타났다. As-deposited $\textrm{MoO}_3$박막을 사용한 일렉트로크로믹 소자가 열처리된 박막을 사용한 소자에비하여 광변조 특성과 전기화학적 특성에서 좋은 일렉트로크로믹 현상을 보여주었다. $\textrm{MoO}_3$박막의 열처리 온도에 따른 효과는 일렉트로크로믹 특성과 가역변색에서 광변조특성과 전기화학적 특성을 감소시키며, 열화현상을 촉진하는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1085-1091
• /
• 1995

Molybdenum disilicide (MoSi2) was synthesized from Mo, MoO3, Si and Al powders by self-propagating high temperature synthesis (SHS). The effect of processing parameters such as Mo/MoO3 molar ratio, Ar gas pressure in the reactor and pressing pressure of compacts in synthesis of MoSi2 were investigated. h-MoSi2 was transformed into t-MoSi2 with increasing the Mo/MoO3 mole ratio, and only t-MoSi2 phase was identified above 3.5 : 1 (molar ratio). The synthesized phases did not change with the variation of Ar gas pressure and pressing pressure of compacts. It was found that the combustion temperature was above 2,50$0^{\circ}C$. The products were separated into MoSi2 (s) and $\alpha$-Al2O3 by the difference of their specific grativities. Bending strength, hardness and density of sintered specimen exhibited 82 MPa, 5.368 GPa and 5.43 g/㎤, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1363-1368
• /
• 1998

Mo/γ-Al2O3 catalysts were prepared by impregnation method in various conditions to identify the states of surface Mo species. TPR (Temperature-Programmed Reduction) and Raman spectroscopy were applied to analyze the surface Mo species. TPR analysis revealed that MoO3 was reduced to Mo through MoO2, the intermediate state and the increase of Mo loading enhanced the reducibility of Mo oxide till the formation of monolayer coverage. High temperature calcination induced oxygen defects in MoO3 giving their unstable states for easier reduction. Raman spectroscopy analysis showed that the increase of Mo loading induced the polymeric Mo oxide.