• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.53.2-53.2
• /
• 2009

몰리브덴(Mo)은 우수한 전기전도도와 고온 안정성으로 인해 전자부품의 전극으로 널리 사용되고, 미래 에너지인 태양전지 분야에서 CIS계 화합물박막태양전지의 후면전극으로 이용되고 있는 재료로서 현재 증착 방법으로는 D.C. sputtering이 가장 널리 이용되고 있다. 또한 $MoO_3$ 분말이 Mo 분말로 수소 환원되는 과정은 $MoO_3+H_2{\rightarrow}MoO_2+H_2O$ 와 $MoO_2+2H_2{\rightarrow}Mo+2H_2O$의 2단계를 통해서 수행되며 이중 첫 번째 단계에서 $MoO_3(OH)_2$라는 기상을 통해 지배적으로 일어난다고 알려져 있고 이를 화학증기수송(Chemical vapor transport : CVT)이라고 한다. 본 연구에서는 $MoO_3$분말의 수소 환원 과정 중에 발생하는 기상인 $MoO_3(OH)_2$을 이용하여 몰리브덴 옥사이드 박막을 증착하고 이를 다시 수소분위기에서 수소 환원하는 증착 방법을 통해 균일하고 부착성이 우수한 Mo 박막을 제조하고자 하였다. 기판으로 사용된 Glass를 $MoO_3$ 분말 위에 홀더를 이용하여 $MoO_2$ 박막을 증착하고 이를 다시 수소분위기에서의 수소 환원을 통해 Mo 박막을 성공적으로 제조하였다. 제조된 Mo박막의 결정구조 및 미세조직을 XRD 와 SEM을 통해 분석하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.1
• /
• pp.73-78
• /
• 2009

투과 전자 현미경(TEM)을 사용하여 소성 후 Pt와 $MoO_3$ 표면 위에 $MoO_x$ 박막층이 형성되는 것을 조사하였다. 연속된 CO 화학 흡착법에 의하여 표면된 노출된 Pt 표면적의 변화를 관찰하였으며, XPS 분석으로 부터 Pt 표면에 형성된 $MoO_x$ 박막층 두께는 소성 온도 증가에 따라 증가하는 것으로 측정되었다. 소성 과정은 Pt와 $MoO_3$ 간에 개선된 접촉을 유도하였으며, Pt/$MoO_3$ 촉매에서 수소전이현상을 조절하는 것으로 나타난다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.1
• /
• pp.79-85
• /
• 2002

Plasma-sprayed Cr$_2$O$_3$-based coatings containing MoO$_3$were studied to gain a better understanding of the influence of MoO$_3$composition in the coatings on their tribological behaviour. A reciprocal type tribo-tester was employed to examine friction and wear behavior of the specimens at room temperature. The physical characteristics of worn surfaces were investigated by scanning electron microscopy and chemical composition of the coating surfaces was analyzed using a X-ray photoelectron spectrometer. The results showed that friction coefficient of the MoO$_3$-added coatings were lower than those without MoO$_3$addition. However pure Cr$_2$O$_3$coating showed the lowest wear loss at the self-mated test. The larger protecting layers were observed at the worn surface of plasma spray coated specimens with MoO$_3$addition. XPS analysis of the protecting layer indicated that MoO$_3$composition was dominantly formed at the surface. MoO$_3$composition in the protecting layer appears to be more favorable in reducing the friction.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.861-868
• /
• 1996

Skeletal isomerization reaction known as exothermic reaction shows possible maximum yield of i-butene from n-butene at $110^{\circ}C$ over $Pt/MoO_3/SiO_2$. Compared with conventional catalyst such as silica, zeolite, alumina etc., $Pt/MoO_3/SiO_2$ demonstrates higher yield while by-products except 2-butene do not form. Faster H spillover rate over $Pt/MoO_3/SiO_2$ is demonstrated via isothermal reduction experiment at $110^{\circ}C$ compared to the rate over $Pt/MoO_3/Al_2O_3$. Overall isomerization rates are proportional to higher spillover rates from Pt onto $MoO_3$ surface. The skeletal isomerization reaction is composed of two elementary steps. First, carbonium ion formation over Pt crystallites by H spillover. Second, carbenium ion formation over $MoO_3$ followed by formation of i-butene. Moreover, it is suggested that H spillover step from Pt surface onto $MoO_3$ is assumed to be the rate determining step and control the overall isomerization rate.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.22-29
• /
• 2001

Plasma-sprayed coatings were prepared using by spray-dried Cr$_2$O$_3$ powder with and without MoO$_3$ addition. A reciprocal type tribe-tester was employed to examine friction and wear behavior of the specimens at room temperature. The worn surfaces of plasma spray coated specimens were observed by SEM. The results showed that friction coefficient of the MoO$_3$-added coatings were lower than those without MoO3 addition. However pure Cr$_2$O$_3$ coating showed the lowest wear loss at the self-mated test. The larger protecting layers were observed at the worn surface of plasma spray coated specimens with MoO$_3$ addition.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1623-1632
• /
• 2006

NiO supported on zirconia modified with $MoO_3$ for acid catalysis was prepared by drying powdered $Ni(OH)_2-Zr(OH)_4$ with ammonium heptamolybdate aqueous solution, followed by calcining in air at high temperature. The characterization of prepared catalysts was performed using FTIR, Raman, XRD, and DSC. $MoO_3$ equal to or less than 15 wt% was dispersed on the surface of catalyst as two-dimensional polymolybdate or monomolybdate, while for $MoO_3$ above 15 wt%, crystalline orthorhombic phase of $MoO_3$ was formed, showing that the critical dispersion capacity of $MoO_3$ on the surface of catalyst is 0.18 g/g NiO-$ZrO_2$ on the basis of XRD analysis. Acidity and catalytic activities for acid catalysis increased with the amount of dispersed $MoO_3$. The high acid strength and acidity was responsible for the Mo=O bond nature of the complex formed by the interaction between $MoO_3$ and $ZrO_2$. The catalytic activity for acid catalysis was correlated with the acidity of the catalysts measured by the ammonia chemisorption method.

• Journal of the Korean Chemical Society
• /
• v.31 no.2
• /
• pp.178-183
• /
• 1987

The kinetics of the reaction of $[Mo_3O_4(H_2O)_9]^{4+}$ with $VO_2^+$have been studied at $25^{\circ}C$ by spectrophotometric method. With$VO_2^+$ in excess, the $[Mo_3O_4(H_2O)_9]^{4+}$ reaction can be expressed as $Mo^{IV}_3+6V^V{\rightleftarrows}3Mo^{IV}+6V^IV}$. Observed rate constants for the reaction are dependent on [$H^+$] and [$VO_2^+$]. Mechanism for the redox of $[Mo_3O_4(H_2O)_9]^{4+}$and $VO_2^+$ is proposed and discussed.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.96-102
• /
• 2001

plasma-sprayed Cr$_2$O$_3$-based coatings containing MoO$_3$ were studied to gain a better understanding of the influence of MoO$_3$ composition in the coatings on their tribological behaviour. A reciprocal type tribo-tester was employed to examine friction and wear behavior of the specimens at high temperature(450。C). The physical characteristics of worn surfaces were investigated by scanning electron microscopy and chemical composition of the coating surfaces was analyzed using a X-ray photoelectron spectrometer. The results showed that friction coefficient of the MoO$_3$-added coatings were lower than those without MoO$_3$ addition. The larger protecting layers were observed at the worn surface of plasma spray coated specimens with MoO$_3$ addition. XPS analysis of the protecting layer indicated that MoO$_3$ composition was dominantly formed at the surface. MoO$_3$ composition in the protecting layer appears to be more favorable in reducing the friction.

• Resources Recycling
• /
• v.20 no.4
• /
• pp.71-77
• /
• 2011

$MoO_3$ powders were reduced to $MoO_2$ under Ar+$H_2$ gas mixture in a tubular furnace at temperature range 723~873 K. Reaction rate was quantitatively deduced by measuring relative humidity of off gas. Observed reaction rate increased significantly with hydrogen partial pressure and reaction temperature and the rate of $H_2O$ evolution increased drastically during the initial period of reduction. As reduction proceeded, however, $H_2O$ partial pressure decreased noticeably. During the initial period of the reduction, a linear relationship for time dependence of the reduction fraction was observed. The activation energy for the reduction of $MoO_3$ to $MoO_2$was 73.56 kJ/mol during the initial period of reduction.

• Journal of the Korean Magnetics Society
• /
• v.11 no.1
• /
• pp.26-31
• /
• 2001

The effect of MoO$_3$ addition on the permeability of Mn-Zn ferrites was studied. 600 ppm, 800 ppm and 1,000 ppm of MoO$_3$ were added to the main composition after calcination. Ferrite cores were sintered at 135$0^{\circ}C$ for 3hrs, followed by cooling according to the equilibrium oxygen concentration. The initial permeability was about 8,000 with heating rate 5$^{\circ}C$/min for 3hrs without MoO$_3$ addition. When 600 ppm and 800 ppm of MoO$_3$ were added, the initial permeabilities, 13,200 and 13,550 were obtained, respectively. However, the sample with 1,000 ppm MoO$_3$ showed lower permeabilities because of abnormal grain growth. At the heating rate 1$0^{\circ}C$/min, the ferrite cores with 1,000 ppm MoO$_3$ demonstrated the highest initial permeability greater than 15,000, without exaggerated grain growth.