• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.442-445
• /
• 2001

In this study, microstructural and dielectric properties of P $b_{0.83}$(L $a_{0.2}$C $e_{0.8}$)$_{0.08}$Ti $O_3$PCT ceramics as a function of Mn $O_2$ addition were investigated for 30MHz ceramic resonator application. Grain size was gradually increased according to the increase of Mn $O_2$ addition amount and showed the highest value of 1.502${\mu}{\textrm}{m}$ at the 0.9wt% Mn $O_2$. Moreover, density showed the highest value of 7.582 g/$\textrm{cm}^2$ at the 0.7wt% Mn $O_2$. All the composition ceramics, curie temperature was nearly constant around 33$0^{\circ}C$.EX>.>.>.

• Journal of the Korean Ceramic Society
• /
• v.33 no.8
• /
• pp.928-934
• /
• 1996

Quantitative analysis each portland cement components was conducted by standard calibration method using X-ray fluorescence spectrometer. Standard sample and the unknown sample were prepared by fused cast bead method. In checking the errors of standard cement 227A372 the relative errors of constituents such as CaO, SiO2, Al2O3, Fe2O3, MgO and SrO were less than 1% and the relative errors of constituents such as So3, K2O, TiO2, Na2O P2O5, and Mn2O3 were less than 5% Sample preparation was mainly contributed to the errors. Compared with general wet chemical method the results of X-ray fluorescence analyses were more precise and accurate. Moreover it is possible to analyze precisely a little amount of the constituents such as SrO, Mn2O3 and P2O5 the analyses of which were very difficult using the wet chemical method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.1
• /
• pp.46-52
• /
• 2004

Hisardale male lambs (n=24, 4-5 month of age) were maintained on a conventional ration for a month, to equilibrate the body mineral status. Six lambs were sacrificed after one month of feeding; the samples of organs were analyzed to ascertain mineral status. The remaining 18 lambs were divided into 3 groups of 6 each on body weight basis. Three dietary treatments containing 100 ($T_1$), 110 ($T_2$) and 120% ($T_3$) of minerals (Ca, P, S, Zn and Mn) as specified by NRC (1985) were formulated and each treatment was alloted ad libitum to a group for 120 days. Blood and wool samples were collected at monthly intervals. At the end of the experiment a balance trial of 5 days duration was conducted to study the balance of mineral elements. The effective intake of minerals was Ca, 111 and 120, P, 110 and 122; S, 112 and 129; Zn, 112 and 126 and Mn, 109 and 123 percent in $T_2$ and $T_3$, respectively, in comparison to $T_1$ (100). The additional mineral supplementation had no significant effect on dry matter intake. The average daily weight gain was higher (p<0.01) in $T_2$ and $T_3$ than the control ($T_1$). The lambs under treatments $T_2$ (8.72) and $T_3$ (8.47 kg) consumed apparently lesser amount of dry matter per unit gain as compared to $T_1$ (10.81 kg). Significantly higher (p<0.05) dry matter and crude protein digestibility (%) were observed in $T_2$ and $T_3$ than in $T_1$. The mean balances for different elements were Ca, 1.14, 1.68 and 1.67 g; P, 1.70, 1.95 and 2.18 g; S, 0.54, 0.92 and 1.11 g; Zn, 22.56, 25.30 and 28.71 mg; Cu, 7.94, 5.71 and 5.53 mg; Fe, 33.19, 32.94 and 31.03 mg and Mn, 8.24, 14.40 and 16.07 mg/lamb/day. The retention of supplemental minerals increased (p<0.01) while that of Cu decreased (p<0.01) due to supplementation of minerals (Ca, P, S, Zn and Mn). Retention as per cent of intake increased statistically for S and Mn while that of Cu decreased. It can be concluded that supplementation of minerals (Ca, P, S, Zn and Mn) higher than the recommended level improved body weight gain and feed to gain ratio. The retention of minerals increased due to supplementation. Therefore, an additional supplementation of deficient minerals (Ca, P, S, Zn and Mn) by 10% was beneficial for Hisardale male lambs under tropical condition in India.

• Clean Technology
• /
• v.20 no.2
• /
• pp.136-140
• /
• 2014

The quaternary alloy (Co/Ni/P/Mn) coatings were prepared using electroless plating on the polypropylene. Compositions of the quaternary alloys (Co/Ni/P/Mn) were controlled by the amount of agents. The composition by EDS, morphology with SEM, film thickness, and surface electrical resistance of the samples were measured. Higher phosphorous content samples give larger electric resistance, thus a relationship is admitted between P content and electric resistance. The corrosivity of the coatings were evaluated by electrochemical methods in the 3.5 wt% NaCl and 5.0 wt% $H_2SO_4$ solutions, respectively. It was concluded that phosphorous addition enhances resistivity in the corrosion.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.3
• /
• pp.91-95
• /
• 2008

In this study, in order to develop the composition ceramics for low loss multilayer piezoelectric actuator application, $Pb(Zn_{1/2}W_{1/2})O_3-Pb(Mn_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3$ (abbreviated as PZW-PMN-PZT)ceramics according to the amount of $MnO_2$ addition were fabricated using two-stage calcinations method. And also, their dielectric and piezoelectric properties were investigated. At the 0.2 wt% $MnO_2$ added PZW-PMN-PZT ceramics sintered at $930^{\circ}C$, density, electromechanical coupling factor $k_p$, dielectric constant ${\varepsilon}_r$, piezoelectric $d_{33}$ constant and mechanical quality factor $Q_m$ showed the optimum value of $7.84g/cm^3$, 0.543, 1,392, 318.7 pC/N, 1,536, respectively for low loss multilayer ceramics actuator application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.744-747
• /
• 2004

[ $0.96[Bio_{0.5}(Na_{0.84}K_{0.16})_{0.5}TiO_3]+0.04SrTiO_3+0.3wt%Nb_2O_5+0.2wt%La_2O_3+xwt%MnO_2$ ], were studied in order to develope the superior dielectric and piezoelectric properties of Lead-free Piezoelectric ceramics. With increasing amount of $MnO_2$ addition, density showed the maximum value of $5.79[gcm^3$] at 0.1wt% $MnO_2$ addition, and electromechanical coupling factor($k_p$) and dielectric constant decreased, and mechanical quality factor($Q_m$) increased and showed the maximum value of 161 at 0.3wt% $MnO_2$ addition.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.14-19
• /
• 2002

The objective of this study is to investigate optimum condition for lignin peroxidase production by white rot fungi Phanerochaete chysosporium IFO 31249 immobilized in a rotating bioreactor. The maximum lignin peroxidase activity of batch culture in rotating bioreactor was 300 U/L. The optimum rotating speed and packing ratio of support for lignin peroxidase production in a rotating bioreactor were 1 rpm and 20%, respectively. The optimum concentration of $MnSO_4$$\cdot$$H_2O$ for manganese-dependent peroxidase production in a rotating bioreactor was 50 ppm. The sufficient supply of oxygen was the most important factor to achieve maximum lignin peroxidase production. It was possible to produce lignin peroxidase (LiP) and manganese-dependent peroxidase (MnP) for at least 3 times successive repeated-batch cultures, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.1
• /
• pp.99-105
• /
• 2000

The purpose of this study was to evaluat the Zn, Cu, Mn and Ni status and correlation of their concentrations in serum, urine, hair and fingernail in female college students. As the results are follows; The mean age of subjects was 22.5 years and height, weight and BMI were 160.1 cm, 51.0 kg and 20.0 respectively. The daily intake of energy 1769.5 kcal and the ratio of carbohydrate, fat and protein for energy is 60 : 20 : 15. The daily intake of energy (88.5%), vitamin B2 (86.1%), Ca (75.4%), Fe (58.3%) and Zn (63.0%) of subjects did not reach to Korean Recommended Dietary Allowance (RDA). The daily mean intake of Zn, Cu, Mn and Ni were 7.56 mg, 2.30 mg, 3.81 mg and 0.18 mg respectively. The concentrations of Zn in serum, urine, hair and nail were 85.6$\mu\textrm{g}$/dL, 391.2$\mu\textrm{g}$/day, 174.6$\mu\textrm{g}$/g and 102.4$\mu\textrm{g}$/g respectively and those Cu were 84.2$\mu\textrm{g}$/dL, 56.6 $\mu\textrm{g}$/day, 20.3$\mu\textrm{g}$/g and 4.3$\mu\textrm{g}$/g respectively. The concentrations of Mn in serum, urine, hari and nail were 0.2$\mu\textrm{g}$/dL, 1.1$\mu\textrm{g}$/day, 1.8$\mu\textrm{g}$/g and 1.6$\mu\textrm{g}$/g respectively and those of Ni were 0.6$\mu\textrm{g}$/dL, 24.5$\mu\textrm{g}$/day, 3.5$\mu\textrm{g}$/g and 3.1$\mu\textrm{g}$/g respectively. The daily intake of Mn showed the positive correlations with concentration of Mn in hair (p<0.05) and the daily intake of Ni was positively correlated with urinary exretion (p<0.05) and hair contents (p<0.001) of Ni. The more detailed studies about these trace mineral status should be required.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.6
• /
• pp.361-366
• /
• 2014

$MnO_2$-doped $0.985[Li_{0.04}(Na_{0.545}K_{0.46})_{0.96}(Nb_{0.81}Ta_{0.15}Sb_{0.04})]O_3+0.015KNbO_3(0.985LNKNTS+0.015KNbO_3)$ lead-free ceramics were fabricated by conventional solid state method to develop excellent dielectric and piezoelectric properties. The result of X-ray diffraction patterns obviously indicated that all of the specimen has pure perovskite structure without secondary phase. In addition, orthorhombic phase and coexistance region of orthorhombic-tetragonal phase (MPB) were observed with amount of $MnO_2$. The optimal values of ${\rho}$=4.70 $g/cm^3$, $d_{33}=238$ pC/N, $k_P=0.46$, $Q_m=121$, ${\varepsilon}_r=849$, and $T_C=225^{\circ}C$ were obtained at 0.01 mol% $MnO_2$ doped $0.985LNKNTS+0.015KNbO_3$ ceramics sintered at $990^{\circ}C$ for 5 h, respectively. Hence, it was indicated that the suitable amount of $MnO_2$ could improve the electrical properties of $0.985[Li_{0.04}(Na_{0.545}K_{0.46})_{0.96}(Nb_{0.81}Ta_{0.15}Sb_{0.04})]O_3+0.015KNbO_3$ ceramics.

• Journal of the Korean Ceramic Society
• /
• v.29 no.11
• /
• pp.900-904
• /
• 1992

High temperature electrical conductivity was measured for perovskite La0.98Sr0.02MnO3 at 200~130$0^{\circ}C$ as a function of Po2 and 1/T. Perovskite La1-xSrxMnO3 system is the typical oxygen electrode in solid oxide fuel cell (SOFC). Acetate precursors were used for the preparation of mixed water solution and the calcined powders were reacted with Na2CO3 flux in order to obtain highly reactive powders of perovskite La0.98Sr0.02MnO3. The relative density was greatly increased above 90% because of the homogeneous sintering. From the conductivity ($\sigma$)-temperature and conductivity-Po2 at constant temperature, the defect structure of La0.98Sr0.02MnO3 was discussed. From the slope of 1n($\sigma$) vs 1/T, the activation energy of 0.069 and 0.108eV were evaluated for above 40$0^{\circ}C$, respectively. From the relationship between $\sigma$ and Po2, it was found that the decomposition of La0.98Sr0.02MnO3 was occurred at 10-15.5 atm(97$0^{\circ}C$) and 10-11 atm(125$0^{\circ}C$). It is supposed that the improvement of p-type conductivity may be leaded by the increase of Mn4+ concentration through the substitution of divalent/monovalent cations for La site in LaMnO3.