• Journal of the Korean Ceramic Society
• /
• v.31 no.5
• /
• pp.505-512
• /
• 1994

It has been reported that a biocement obtained by mixing CaO-SiO2-P2O5 glass powder and ammonium phosphate solution has biocompatibility as well as high strength. However, the compositional dependence on its hardening and hydroxyapatite formation phenomena has not been studied. Therefore, the main objective of this work is to study the effects of P2O5, MgO in CaO-SiO2 system glass on the hardening and hydroxyapatite formation. When more than 50 mole% of CaO containing CaO-SiO2 glasses was reacted with ammonium phosphate solution, CaNH4PO4.H2O crystal was formed, but the glass with less than 50 mol% of CaO formed (NH4)2HPO4 and NH4H2PO4 crystals which are derived from ammonium phosphate solution without reacting with the glasses. As the amount of P2O5 in CaO-SiO2-P2O5 glass system was increased, the formation of CaNH4PO4.H2O crystal was enhanced. When those hardened samples were reacted with tris-buffer solution, hydroxyapatite was obtained only for the sample with CaNH4PO4.H2O. While the substitution of MgO for CaO decreased the formation of CaNH4PO4.H2O crystal. MgNH4PO4.H2O crystla was formed in high MgO containing glass, which did not react with tris-buffer solution.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.6
• /
• pp.407-416
• /
• 2003

Although the requirement and optimum soil level of Si for oriental melon are still not well understood, silicate fertilizer is commonly applied to the oriental melon in plastic film houses where soil silicate level is relatively high. In this research the effects of silicate fertilizer on growth, fruit yield and fruit quality of oriental melon, and soil properties were investigated in plastic film house where the soil available silicate was $212mg\;SiO_2\;kg^{-1}$. Silicate fertilizer was applied in the rates of 100, 200, and $300kg\;10a^{-1}$. The application of silicate fertilizer could not increase the early growth of oriental melon, and also the fruit yield and quality were not different among the treatments. Available Si and P contents in soils and also Si and P contents in leaf of oriental melon of the different treatments were not significantly different. In the relationship between total Si in oriental melon leaf and soil silicate extracted by 1 N sodium acetate, optimum soil available silicate level for oriental melon was found to be around $100mg\;SiO_2\;kg^{-1}$. These results indicate that the additional silicate fertilization in soils of available silicate higher than $100mg\;SiO_2\;kg^{-1}$ is unnecessary, and such application of silicate can not have any beneficial effect on the growth and fruit yield of oriental melon.

• Journal of Korea Foundry Society
• /
• v.39 no.3
• /
• pp.33-43
• /
• 2019

In this study, the effects of Zn additions on the mechanical properties of Al-Si-Mg-Cu alloys were investigated by increasing the amount of Zn up to 8wt.%. As the Zn content was increased up to 6 wt.%, the yield strength and elongation changed linearly without any significant changes in the size and shape of the main reinforcement phase. However, it was confirmed by SEM observation that the Mg-Zn phase formed between the reinforcement phases when the amount of Zn added exceeded 7wt.%. A Mg-Zn intermetallic compound formed between the $Mg_2Si$ phase, becoming a crack initiation point under stress. Thus, the formation of the Mg-Zn phase may cause a sharp decrease in the elongation when Zn at levels exceeding 7 wt.%. It was also found that the matrix became more brittle with increasing the Zn content. From these results, it can be concluded that the formation of the Mg-Zn intermetallic compound and the brittle characteristics of the matrix are the main causes of the remarkable changes in the mechanical properties of this alloy system

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.68-68
• /
• 2000

펄스레이저 증착법(이하 PLD)을 이용하여 마이크로파 유전체 소자 및 절연 산화막으로의 응용을 위한 MgTiO3 박막을 다양한 기판상에서 증착하였다. 사파이어 기판에 (a,c-plane Al2O3) 성장된 MgTiO3 박막은 에피텍셜 성장(epitaxial growth)이 되었으며, SiO2/Si 및 Pt/Ti/Si 기판위세 성장된 MgTiO3 박막의 경우 003방향으로 배향(oriented) 되었다. MgTiO3 박막은 450~75$0^{\circ}C$까지 기판온도를 변화시키면서 증착시켰으며, 증착시 산소분압은 50~200 mTorr로 변화시켰다. PLD 증착시 타켓에 조사된 레이저 에너지 밀도는 약 2J/cm2였으며, MgTiO3 박막 증착후 200Torr O2 분위기에서 상온까지 1$0^{\circ}C$/min 의 속도로 냉각시켰다. 사파이어 c-plane 상에서 일머나잇(ilminite) MgTiO3 구조가 55$0^{\circ}C$ 에피텍셜 성장하는 것을 관찰할 수 있었으며, 사파이어 a-plane 상에서는 MgTiO3 구조가 $650^{\circ}C$ 이상부터 110방향으로 배향되며 성장하였다. $600^{\circ}C$ 이상에서 c-축으로 배향된 구조를 갖고 있었다. 증착된 MgTiO3 박막의 조성분석(stoichio metric analysis)을 위해 RBS 분석을 수행하여, 증착에 이용된 타켓과 동일한 조성을 갖는 MgTiO3 박막이 성장된 것을 확인할 수 있었다. 사파이어 기판상에 증착된 MgTiO3 박막은 가시영역에서 투명하였으며, 약 270nm 파장을 갖는 영역에서 급격한 흡수단을 보였다. 이때의 MgTiO3 박막은 AFM 분석을 통해 약 0.87mn rms roughness 값을 갖는 매우 평탄한 표면구조를 갖고 있는 것을 확인하였다. MIM(Pt/MgTiO3/Pt) 구조의 캐패시터를 형성시켜 MgTiO3 박막의 유전특성(dielectric properties)을 관찰하였다. PLD로 성장된 MgTiO3 박막의 유전율(relative dielectric constant)은 약 22였으며, 1MHz에서 약 1.5%의 유전손실(dielectirc loss) 값을 보였다. 또한 이때 MgTiO3 박막은 낮은 유전분산값을 보였다.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.3
• /
• pp.55-61
• /
• 2009

Fe-V is used as raw material of vanadium in the steel making process. The purpose of this study, Fe-V is to replace the $VO_{4}$. So the distribution behavior of vanadium in $VO_{4}$ of the steel investigated. The distribution ratio of the vanadium where potential of the free oxygen ion will increase in slag decreased. When CaO and MgO content which is a basic oxide from CaO-$SiO_2$-FetO-MgOsatd. slag increases, S distribution ratio increases. CaO-$SiO_2$-FetO-MgOsatd. slag better than CaO-$SiO_2$-$Al_2O_3$-MgO slag is the recovery of vanadum and desulfurization.

• Electrical & Electronic Materials
• /
• v.6 no.5
• /
• pp.470-475
• /
• 1993

1150, 1450, 1600.deg.C에서 MgO-SiO$_{2}$-Al$_{2}$O$_{3}$계를 유리성분으로 하는 mullite-glass질 회로기판재료의 소결거동에 미치는 MgO첨가량과 소성시간에 따른 영향을 조사하였으며 주로 소성시간이 밀도, 기공분포, 미세구조 및 생성상에 미치는 영향을 조사하였다. 1150.deg.C에서는 MgO의 첨가량에 관계없이 소결이 진행되지 않았으며 1450.deg.C에서는 MgO첨가량에 따라 소결속도가 증가하였다. 1600.deg.C에서는 각조성의 시료 모두가 빨리 과소성단계에 도달하였다. 1450.deg.C에서는 MgO 0.85% 첨가했을때 소성시간에 따라 기공량은 감소하는 반면 기공경은 일정하게 증가하였다. 먼저 .alpha.-SiO$_{2}$가 cristobalite로 전이한 후에 MgO와 반응하여 유리상으로 된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.784-791
• /
• 2013

Four different yeasts (Fermivin (FM), Saf-instant yeast red (SI), Angest wine active dry yeast (AW) and Angest instant yeast high sugar (AI)) were used for the fermentation of black raspberry wine. The amount of reducing sugars in FM (2.7%) and AI (2.8%) were higher than those in SI (2.4%) and AW (2.5%). The amount of glucose (the major free sugar) was higher in AW (2.57 mg/mL) and AI (2.50 mg/mL) than FM (2.03 mg/mL) and SI (1.75 mg/mL). AW (11.95%) had the highest alcohol content, while SI (11.75%) had the lowest. The pH of FM (pH 3.73) was the lowest, and there were no significant differences in total acidity among the samples. The major organic acid in the wines was citric acid (6.71~8.18 mg/mL) and the amount of organic acids depended on the type of yeasts. The amount of malic acid was highest in SI (2.92 mg/mL), and lowest in AI (1.83 mg/mL). The Hunter color test showed that SI was highest in lightness, redness and yellowness, whereas AI was lowest. There were no differences in turbidity between the samples. There were no significant differences in total phenolic contents (TPC) and total anthocyanin contents (TAC). However, the TPC and TAC of black raspberry wines were higher than those in commercial red wines. The antioxidant activities of wines (determined by ABTS and FRAP) increased in the order of FM, AI, AW and SI. It could not be concluded which yeast is adequate for the fermentation of black raspberry wine because any of the tested yeasts showed the best in all the quality characteristics of the wines.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.2
• /
• pp.118-123
• /
• 2010

The eco-friendly technologies have been extended as matter of international concern due to various diseases and syndromes according to an environmental pollution. In this study, we have manufactured a ceramic cluster with thick film type for anion generation equipment which is maximized anion but minimized ozone contents generated. To develop the formulation of ceramic cluster, we conducted the $Mg_2SiO_4$ powders doped with 10 vol% glass frits as Na-Zn-B-O system and sintered at $1050^{\circ}C$ for 2 hours in air for starting materials and investigated the matching properties between the Ag-Pd electrode and the starting materials. The sintered sample for the composition of cluster has 6.7 of dielectric constant and 32 kV/mm of withstand voltage. The yield of anions was measured according to an electrode pattering, discharge gap between electrode, and thickness of electrode protective layer in the cluster of thick film type. We have manufactured the ceramic clusters with optimized thick film structure that have an anion over a hundred particles and the ozone of 0.6 ppb generated.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.29-33
• /
• 2001

In the present study, AZ91Mg/$\textrm{Al}_2\textrm{O}_3$ short fiber+SiC particulates hybrid metal matrix composites(MMCs) were fabricated by squeeze casting method. Different particulate sizes of 45, 29 and $9\mu\textrm{m}$ were hybridized with 5% volume fraction to investigate the effect of SiC particulates size on microstructure, mechanical and thermal properties such as hardness, flexural strength, wear resistance and thermal expansion. Results show that the microstructure of the hybrid composites were quite satisfactory, namely revealing relatively uniform distribution of reinforcements. Some aggregation of SiC particulates caused by particle pushing was observed especially in the hybrid composites containing in fine particulates($9\mu\textrm{m}$). The hardness and flexural strength were improved by decreasing particulates size, whereas wear resistance improved by increasing particulates size because of large particulates restricting matrix wear from contacted stress. Regardless of particulates size, thermal expansion of composites was the same. This may be because the content of particulates was in all cases 5 volume fraction.1

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.2
• /
• pp.67-71
• /
• 2006

In this paper, we have investigated the structure and dielectric properties of the $(Ba_{0.6}Sr_{0.4})TiO_3$ (BST) thin films fabricated on MgO(100)/Si substrate by an alkoxide-based sol-gel method. Both the structure and morphology of those films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). For the MgO(100)/Si substrate, the BST thin films exhibited highly (100) orientation. The highly (100)-oriented BST thin films showed high dielectric constant, tunability, and figure of merit (FOM). The dielectric constant, dielectric loss and tunability of the BST thin films annealed at $700^{\circ}C$ deposited on the MgO(100)/Si substrate measured at 10 kHz were 515.9, 0.0082, and 54.3%, respectively.