• 청정기술
• /
• 제9권3호
• /
• pp.125-132
• /
• 2003

본 연구에서는 이산화탄소 개질반응에 대한 연구의 일환으로 HY-zeolite를 주요 담체로 하여 니켈촉매의 활성화 개선에 대한 연구를 수행하였다. 메탄과 이산화탄소의 전환율은 반응온도가 증가함에 따라 증가하였고, $700^{\circ}C$ 이상이 되었을 때 80% 이상의 전환율을 얻었고, 니켈의 담지량이 증가함에 따라 촉매의 활성이 증가하였으며, 13wt%에서 가정 높은 활성을 보였다. 담체에 대한 영향으로 HY-zeolite 외에 ${\gamma}-Al_2O_3$와 $SiO_2$에 니켈을 담지시켜 반응활성을 비교한 결과 메탄과 이산화탄소의 초기 전환율은 HY-zeolite에 담지된 니켈 촉매를 사용했을 때가 가장 높았으나, 시간이 지남에 따라 ${\gamma}-Al_2O_3$에 담지된 니켈 촉매보다 비활성화가 빨랐지만 24시간 반응 후에도 메탄의 전환율이 80% 이상을 나타내었다. 그리고 13wt%Ni/HY-zeolite 촉매의 성능 향상을 위하여 Mg, Mn, K, Ca을 조촉매로 첨가하여 반응활성을 조사한 결과 Mg을 첨가한 촉매가 높은 활성과 안정성을 나타내었고, Mg의 최적 첨가량이 5wt%임을 확인하였다.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.969-973
• /
• 1998

Pb(Zr, Ti)O3 (PZT) (Zr:Ti= 52: 48) thin films were prepared on MgO(100) substrates by dipping-py-rolysis process using metal naphthenates as starting materials. Thin films were fabricated by spin coating technique and the precursor films were prefired at 20$0^{\circ}C$ in air for 0.5, 1, 2, 3, and 24 h followed by final heat treatment at 75$0^{\circ}C$ for 30min. Film prefired for 24 h lost orientational properties and pole figure analysis showed the lost of the epitaxial relationship between the films and substrate while highly a/c-axis oriented thin films were obtained for the samples prefired for 1, 2, and 3h.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.199-203
• /
• 1998

$Pb(Zr, Ti)O_3$ (Pb:Zr:Ti=1:0.52:0.48) thin films were prepared on single crystal MgO(100) substrates by dipping-pyrolysis process using a solution of constituent metal naphthenates as starting materials. The solution was spin-coated onto substrate and the precursor films were pyrolyzed at $200^{\circ}C$ in air or at $200^{\circ}C$ in argon for 1, 2, 5 and 24h, followed by final heat treatment at $750^{\circ}C$. For all the films, highly (h00)/(00l)-oriented Pb$Pb(Zr, Ti)O_3$ thin films with smooth surfaces and crack-free were obtained, whereas thin film pyrolyzed in air for 24 h exhibited polycrystalline character. According to the pole-figure analysis, epitaxy of the product films was found to depend on pyrolysis atmosphere.

• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.277-281
• /
• 1987

The various contents of MgF2 from 0 to 12.5wt% are studied in the AlF3-(Mg＋Sr＋Ba)F2-P2O5 system for the effects of various properties in glasses and the atmosphere of melting was controlled by N2 and Ar gas respectively. Density, refractive index, infrared transmission, thermal conductivity and thermal expansion coefficient of glasses are determined. Density, refractive index and thermal conductivity are decreased, micro-hardness and thermal expansion coefficient are increased according to the increasing of MgF2 contents. Infrared transmittance decreases with increasing the MgF2 contents and it slightly dropped by air than N2 and Ar atmosphere. Other properties are not influenced by atmosphere control.

• Bulletin of the Korean Chemical Society
• /
• 제24권8호
• /
• pp.1049-1050
• /
• 2003

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.232-236
• /
• 2015

The electro-optical characteristics of several functional layers over the MgO protective layer were studied during the continuous discharge of an AC-PDP. In order to observe the degradation of each functional layer on the MgO protection layer, we measured the surface morphology, cathodoluminescence (CL) spectrum, the secondary electron emission coefficient (${\gamma}$) and the discharge characteristics after 500 hours of discharge during the operation of the AC-PDP.

• 한국식품위생안전성학회지
• /
• 제32권4호
• /
• pp.336-340
• /
• 2017

본 연구는 정향추출물의 E. coli O157:H7에 대한 항균효과와 E. coli O157:H7 감염 마우스에 대한 치료효과를 평가하기 위해 수행되었다. 정향 메탄올 추출물(FSAE)을 이용하여 E. coli O157:H7에 대한 항균효과 확인 시험을 수행한 결과, 배양 후 24시간째에, FSAE를 첨가한 모든 군들에서 E. coli O157:H7의 생존율이 무투여 대조군에 비해 통계적으로 유의성 있게 감소하는 결과를 보여(0.269 mg/ml, p < 0.05; 0.538과 1.075 mg/ml, p < 0.001), FSAE가 E. coli O157:H7의 증식억제 효과가 뛰어난 것으로 확인되었다. 또한, E. coli O157:H7을 감염시킨 마우스에 FSAE를 경구로 투여한 결과, 투여 후 3일째에, FSAE를 1.075 (p < 0.05)와 2.15 mg/ml (p < 0.01)로 투여한 군들에서 대조군과 비교하여 분변내 E. coli O157:H7의 균수가 유의성 있게 감소하였으며, 투여 7일째에는, 모든 FSAE 투여군들에서 대조군과 비교하여 E. coli O157:H7의 균수가 통계적으로 유의성 있게 감소하였다(0.538 mg/ml, p < 0.05; 1.075와 2.15 mg/ml, p < 0.001). 이상의 연구결과로부터, FSAE를 E. coli O157:H7에 감염된 마우스에 경구로 투여할 경우, 감염증상을 완화 시킬 수 있을 것으로 기대된다.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.470-476
• /
• 1987

The system of 0.1Pb(Mg1/3N2/3)O3-yPbTiO3-zPbZrO3 piezoelectric ceramics was made in the radial model disk and ring dot type filter. The resonant frequency(fr) variations were investigated for 100 hours and the temperature range from 20$^{\circ}C$ to 100$^{\circ}C$. As the results, the morphotropic phase boundary was supposed to be the composition of 45 y 50 and 40 z 45. The best characteristic of againg effect, after 10-hours, was composed of y, z=45. The stabilized characteristic of temperature varition, to become 0.1% up to 100$^{\circ}C$, was composed of y=50 and z=40. The bandwidth was broadened with increasing the electromechanical coefficient(kp), and the filter characteristics was approached ideal mode with increasing mechanical quality factor(Qm). Kp and Qm affected combinationally on filter characteristics.

• 한국세라믹학회지
• /
• 제13권2호
• /
• pp.24-30
• /
• 1976

To observe the influence of tetrahedral and octahedral preference of cations of Ni2+, Ti4+ upon the formation and the color development of the MgO-SnO2 spinel containing Ni2+ and Ti4+ ions, the gradual substitution of Ni2+ ions for Mg2+ ions and of Ti4+ ions for Sn4+ ions of the spinel in NiO-MgO-SnO2-TiO2 system was carried out. On samples prepared by calcining the oxide and basic carbonate mixtures at 130$0^{\circ}C$ for 1.5 hour, the X-ray analysis, measurement of reflectance and the test of their stability as a glaze pigment were also carried out. On samples prepared by calcining the oxide and basic carbonate mixtures at 130$0^{\circ}C$ for 1.5 hour, the X-ray analysis, measurement of reflectance and the test of their stabiality as a glaze pigment were also carried out. The results are summarized as follows. 1) As increasing the amounts of Ni2+ ions in the xNiO.(2-x)MgO.SnO2 system, spinel was not formed easily, and the mixed-spinel was formed in NiO.MgO.SnO2 of x=1 but the spinels was not formed completely in the range of x>1.5 2) The spinels was not more formed in NiO-MgO-TiO2 system than NiO-MgO-SnO2 system. Therefore, Ti4+ ions have strong octahedral preference than Sn4+ ions. The color changed the yellow region little. The mixed-spinel or non-spinel was formed easily NiO.TiO2, MgO.TiO2 of illmenite type as the gradual substitution of Ti4+ ions for Sn4+ ions. 3) The results of glaze test. The color changed from white through graish brown to brown as the gradual substitution of Ni2+ ions for Mg2+ ions in calcium-zinc glaze and calcium glaze, and from white through light yellowish beige to dull beige in tile glaze. Also, the color did not change generally as the gradual substitution of Ti4+ ions for Sn4+ ions in NiO-MgO-SnO2-TiO2 system.

• Bulletin of the Korean Chemical Society
• /
• 제24권7호
• /
• pp.975-980
• /
• 2003

The electrochemical properties and the mechanism of formation of anodic oxide films on Mg alloys containing 0-15 mass% Al, when anodized in NaOH solution, were investigated by focusing on the effects of anodizing potential, Al content, and anodizing time. The intensity ratio of Mg(OH)₂ in the XRD analysis decreased with increasing applied potential, while that of MgO increased. Mg(OH)₂ was barely detected at 80 V, while MgO was readily detected. The anti-corrosion properties of anodized specimens at each constant potential were better than those of non-anodized specimens. The specimen anodized at an applied potential of 3 V had the best anti-corrosion property. The intensity ratio of the β phase increased with aluminum content in Mg-Al alloys. During anodizing, the active dissolution reaction occurred preferentially in β phase until about 4 min, and then the current density increased gradually until 7 min. The dissolution reaction progressed in α phase, which had a lower Al content. In the anodic polarization test in 0.017 mol·$dm^{-3}$ NaCl and 0.1 mol·$dm^{-3}$ Na₂SO₄ at 298 K, the current density of Mg-15 mass% Al alloy anodized for 10 min increased, since the anodic film that forms on the α phase is a non-compacted film. The anodic film on the α phase at 30 min was a compact film as compared with that at 10 min.