• Clean Technology
• /
• v.9 no.3
• /
• pp.125-132
• /
• 2003

Activity improvement of Ni metal catalysts for carbon dioxide reforming was studied using HY-zeolite as the main supporter. As the reaction temperature increased, $CH_4$ and $CO_2$ conversions increased, and conversions higher than 80% was obtained above $700^{\circ}C$. As the Ni loading increased, the catalyst activity increased, and the highest activity was shown for the Ni loading of 13wt%. The HY-zeolite support showed the highest intial conversions of $CH_4$ and $CO_2$, but it showed faster deactivation than a ${\gamma}-Al_2O_3$ support. Nevertheless, it maintained the $CH_4$conversion higher than 80% after 24 hr reaction. The effect of promoters such as Mg, Mn, K, and Ca was also studied. It was observed that the Mg promotor exhibited the highest catalyst activity and less deactivation compared with Mn, K and Ca. After 24hr reaction, The optimum Mg content was found to be 5wt%.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.969-973
• /
• 1998

Pb(Zr, Ti)O3 (PZT) (Zr:Ti= 52: 48) thin films were prepared on MgO(100) substrates by dipping-py-rolysis process using metal naphthenates as starting materials. Thin films were fabricated by spin coating technique and the precursor films were prefired at 20$0^{\circ}C$ in air for 0.5, 1, 2, 3, and 24 h followed by final heat treatment at 75$0^{\circ}C$ for 30min. Film prefired for 24 h lost orientational properties and pole figure analysis showed the lost of the epitaxial relationship between the films and substrate while highly a/c-axis oriented thin films were obtained for the samples prefired for 1, 2, and 3h.

• The Korean Journal of Ceramics
• /
• v.4 no.3
• /
• pp.199-203
• /
• 1998

$Pb(Zr, Ti)O_3$ (Pb:Zr:Ti=1:0.52:0.48) thin films were prepared on single crystal MgO(100) substrates by dipping-pyrolysis process using a solution of constituent metal naphthenates as starting materials. The solution was spin-coated onto substrate and the precursor films were pyrolyzed at $200^{\circ}C$ in air or at $200^{\circ}C$ in argon for 1, 2, 5 and 24h, followed by final heat treatment at $750^{\circ}C$. For all the films, highly (h00)/(00l)-oriented Pb$Pb(Zr, Ti)O_3$ thin films with smooth surfaces and crack-free were obtained, whereas thin film pyrolyzed in air for 24 h exhibited polycrystalline character. According to the pole-figure analysis, epitaxy of the product films was found to depend on pyrolysis atmosphere.

• Journal of the Korean Ceramic Society
• /
• v.24 no.3
• /
• pp.277-281
• /
• 1987

The various contents of MgF2 from 0 to 12.5wt% are studied in the AlF3-(Mg＋Sr＋Ba)F2-P2O5 system for the effects of various properties in glasses and the atmosphere of melting was controlled by N2 and Ar gas respectively. Density, refractive index, infrared transmission, thermal conductivity and thermal expansion coefficient of glasses are determined. Density, refractive index and thermal conductivity are decreased, micro-hardness and thermal expansion coefficient are increased according to the increasing of MgF2 contents. Infrared transmittance decreases with increasing the MgF2 contents and it slightly dropped by air than N2 and Ar atmosphere. Other properties are not influenced by atmosphere control.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1049-1050
• /
• 2003

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.232-236
• /
• 2015

The electro-optical characteristics of several functional layers over the MgO protective layer were studied during the continuous discharge of an AC-PDP. In order to observe the degradation of each functional layer on the MgO protection layer, we measured the surface morphology, cathodoluminescence (CL) spectrum, the secondary electron emission coefficient (${\gamma}$) and the discharge characteristics after 500 hours of discharge during the operation of the AC-PDP.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.336-340
• /
• 2017

The present study evaluated the antibacterial effect of Flos syzygii Aromatici methanolic extracts (FSAE). In addition, the effectiveness of FSAE against Escherichia coli O157:H7 infection was studied using ICR female mice. At 24 h after incubation of E. coli O157:H7, FSAE at the concentration of 0.269 (p < 0.05), 0.538 (p < 0.001) and 1.075 mg/mL (p < 0.001) significantly inhibited the growth of E. coli O157:H7 compared to the control group. After single challenge with E. coli O157:H7, forty female ICR mice were divided into four experimental groups which were orally administered with saline (control), 0.538 (group 1), 1.075 (group 2) and 2.15 mg/mL (group 3) of FSAE, respectively. On the 3rd day, the number of fecal E. coli O157:H7 in group 2 (p < 0.05) and group 3 (p < 0.01) was significantly decreased compared to that in the control group. On the 7th day post-treatment, the number of fecal E. coli O157:H7 in all FSAE-treated groups was significantly decreased compared to that in the control group (group 1, p < 0.05; group 2 and 3, p < 0.001). According to the results of the present study, administration of FSAE to mice can reduce the severity of E. coli O157:H7 infection. Therefore, the current study suggests that FSAE could be a good candidate for the treatment of enteric infections in domestic animals.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.470-476
• /
• 1987

The system of 0.1Pb(Mg1/3N2/3)O3-yPbTiO3-zPbZrO3 piezoelectric ceramics was made in the radial model disk and ring dot type filter. The resonant frequency(fr) variations were investigated for 100 hours and the temperature range from 20$^{\circ}C$ to 100$^{\circ}C$. As the results, the morphotropic phase boundary was supposed to be the composition of 45 y 50 and 40 z 45. The best characteristic of againg effect, after 10-hours, was composed of y, z=45. The stabilized characteristic of temperature varition, to become 0.1% up to 100$^{\circ}C$, was composed of y=50 and z=40. The bandwidth was broadened with increasing the electromechanical coefficient(kp), and the filter characteristics was approached ideal mode with increasing mechanical quality factor(Qm). Kp and Qm affected combinationally on filter characteristics.

• Journal of the Korean Ceramic Society
• /
• v.13 no.2
• /
• pp.24-30
• /
• 1976

To observe the influence of tetrahedral and octahedral preference of cations of Ni2+, Ti4+ upon the formation and the color development of the MgO-SnO2 spinel containing Ni2+ and Ti4+ ions, the gradual substitution of Ni2+ ions for Mg2+ ions and of Ti4+ ions for Sn4+ ions of the spinel in NiO-MgO-SnO2-TiO2 system was carried out. On samples prepared by calcining the oxide and basic carbonate mixtures at 130$0^{\circ}C$ for 1.5 hour, the X-ray analysis, measurement of reflectance and the test of their stability as a glaze pigment were also carried out. On samples prepared by calcining the oxide and basic carbonate mixtures at 130$0^{\circ}C$ for 1.5 hour, the X-ray analysis, measurement of reflectance and the test of their stabiality as a glaze pigment were also carried out. The results are summarized as follows. 1) As increasing the amounts of Ni2+ ions in the xNiO.(2-x)MgO.SnO2 system, spinel was not formed easily, and the mixed-spinel was formed in NiO.MgO.SnO2 of x=1 but the spinels was not formed completely in the range of x>1.5 2) The spinels was not more formed in NiO-MgO-TiO2 system than NiO-MgO-SnO2 system. Therefore, Ti4+ ions have strong octahedral preference than Sn4+ ions. The color changed the yellow region little. The mixed-spinel or non-spinel was formed easily NiO.TiO2, MgO.TiO2 of illmenite type as the gradual substitution of Ti4+ ions for Sn4+ ions. 3) The results of glaze test. The color changed from white through graish brown to brown as the gradual substitution of Ni2+ ions for Mg2+ ions in calcium-zinc glaze and calcium glaze, and from white through light yellowish beige to dull beige in tile glaze. Also, the color did not change generally as the gradual substitution of Ti4+ ions for Sn4+ ions in NiO-MgO-SnO2-TiO2 system.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.7
• /
• pp.975-980
• /
• 2003

The electrochemical properties and the mechanism of formation of anodic oxide films on Mg alloys containing 0-15 mass% Al, when anodized in NaOH solution, were investigated by focusing on the effects of anodizing potential, Al content, and anodizing time. The intensity ratio of Mg(OH)₂ in the XRD analysis decreased with increasing applied potential, while that of MgO increased. Mg(OH)₂ was barely detected at 80 V, while MgO was readily detected. The anti-corrosion properties of anodized specimens at each constant potential were better than those of non-anodized specimens. The specimen anodized at an applied potential of 3 V had the best anti-corrosion property. The intensity ratio of the β phase increased with aluminum content in Mg-Al alloys. During anodizing, the active dissolution reaction occurred preferentially in β phase until about 4 min, and then the current density increased gradually until 7 min. The dissolution reaction progressed in α phase, which had a lower Al content. In the anodic polarization test in 0.017 mol·$dm^{-3}$ NaCl and 0.1 mol·$dm^{-3}$ Na₂SO₄ at 298 K, the current density of Mg-15 mass% Al alloy anodized for 10 min increased, since the anodic film that forms on the α phase is a non-compacted film. The anodic film on the α phase at 30 min was a compact film as compared with that at 10 min.