• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• 한국재료학회지
• /
• 제24권5호
• /
• pp.249-254
• /
• 2014

Due to their unique properties, tungsten borides are good candidates for the industrial applications where certain features such as high hardness, chemical inertness, resistance to high temperatures, thermal shock and corrosion. In this study, conditions were investigated for producing tungsten boride powder from tungsten oxide($WO_3$) by self-propagating high-temperature synthesis (SHS) followed by HCl leaching techniques. In the first stage of the study, the exothermicity of the $WO_3$-Mg reaction was investigated by computer simulation. Based on the simulation experimental study was conducted and the SHS products consisting of borides and other compounds were obtained starting with different initial molar ratios of $WO_3$, Mg and $B_2O_3$. It was found that $WO_3$, Mg and $B_2O_3$ reaction system produced high combustion temperature and radical reaction so that diffusion between W and B was not properly occurred. Addition of NaCl and replacement of $B_2O_3$ with B successfully solved the diffusion problem. From the optimum condition tungsten boride($W_2B$ and WB) powders which has 0.1~0.9 um particle size were synthesized.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2008년도 High Temperature Superconductivity Vol.XVIII
• /
• pp.12-12
• /
• 2008

• 한국식품과학회지
• /
• 제48권1호
• /
• pp.15-19
• /
• 2016

Drying process was applied to increase the antioxidant activity of onion powder: freeze-drying or air-drying at 50, 70, and $90^{\circ}C$ and onion extracts were obtained from each powder using water or aqueous ethanol (50%) at $25^{\circ}C$ and $60^{\circ}C$. In the color analysis, the freeze-dried powders showed higher $L^*$ and lower $a^*$ and $b^*$ values than did the air-dried ones. The browning index of powders air-dried at $90^{\circ}C$ was significantly higher than that of freeze-dried powders or those air-dried at temperatures below $90^{\circ}C$. Phenolic content in the extracts was 4.02-23.12 mg gallic acid equivalent/g sample, and was the highest in the extract from the sample air-dried at $90^{\circ}C$, regardless of the extraction condition. The highest antioxidant activity, measured by 2,2-azinobis-3-ethylbenzothiazoline-6-sulfonic acid and 1,1-diphenyl-2-picrylhydrazyl methods, was found in the powder air-dried at $90^{\circ}C$, which induced browning. These findings indicate that antioxidant activity depends more on browning during drying than on extraction conditions.

• 한국세라믹학회지
• /
• 제50권3호
• /
• pp.195-200
• /
• 2013

Here, we report preparation of cyan ceramic nano-pigment for inkjet printing and the Ni substitutional effects on the cyan color. $MgAl_2O_4$ was selected as the crystalline host network for the synthesis of nickel-based cyan ceramic nano-pigments. Various compositions of $Ni_xMg_{1-x}Al_2O_4$ ($0{\leq}x{\leq}1$) powders were prepared using the polymerized complex method. The powder was then preheated at $400^{\circ}C$ for 5 h and finally calcined at $1000^{\circ}C$ for 5 h. XRD patterns of $Ni_xMg_{1-x}Al_2O_4$ showed a single phase of the spinel structure in all the compositions. The particle sizes ranged from 20 to 50 nm in TEM observations. The characteristics of the color tones of $Ni_xMg_{1-x}Al_2O_4$ were analyzed by UV-Visible spectroscopy and CIE $L^*a^*b^*$ measurement. CIE $L^*a^*b^*$ measurement results indicate that the pigment color changes from light cyan to deep cyan due to the decrease of the $a^*$ and $b^*$ values with an increase of an Ni substitutional amount. In addition, the thermal stability and the binding nature of $Ni_xMg_{1-x}Al_2O_4$ are also discussed using TG-DSC and FT-IR results respectively.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.8-13
• /
• 1999

$ZrB _2$ was prepared from a mixture of $ZrO_2$, $B_2$$O_3$and Mg by SHS method. The combustion products were successfully obtained from a mixture of $Zro_2$:$B_2$$O_3$:Mg=1:2.0:8.5(molar ratio). MgO, by-product, was removed to 92.7% by leaching with 1M HCl solution at 9$0^{\circ}C$, for 10 hours. After leaching, the mean particle size of the resultant $ZrB_2$powders was 23.6$\mu\textrm{m}$. $ZrB_2$-ZrC composite was suitably obtained from a mixture of C/Zr=1.2 molar ratio by arc-melting method. The density of arc-melted specimen increased by adding excess zirconium content(x). The bulk density was 6.17g/㎤ for x=0, and 6.37g/㎤ x=4. Vickers hardness of arc-melted specimen was /$1290kg\textrm{mm}^2$ for x=0, and fracture toughness increased to 4.2MPa.m\ulcornerforx=4 compared to 3.4MPa.m\ulcornerfor x=0.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.31-31
• /
• 2003

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2008년도 High Temperature Superconductivity Vol.XVIII
• /
• pp.81-81
• /
• 2008

• 전기화학회지
• /
• 제15권2호
• /
• pp.67-73
• /
• 2012

본 연구에서는 습식분쇄, 구형화 분무건조 및 열처리 공정을 통해 구형의 $LiMn_{2-x}M_xO_4$(M = Al, Mg, B) 스피넬계 양극소재를 합성하고, 이의 전기화학적 성능을 평가하였다. $MnO_2$ (Tosoh, 91.94%), $Li_2CO_3$ (SQM, 97%), $MgCO_3$ (Aldrich, 99%), $Al(OH)_3$ (Aldrich, 99%) 및 $B_2O_3$ (Aldrich, 99%)를 원료로 사용하였으며, 분무건조공정에서 전구체의 구형화도 증가를 위해 PAAH 바인더를 첨가하였다. 200~500 nm 크기로 분쇄된 혼합 슬러리 용액으로부터 분무건조법을 통해 구형의 전구체를 제조하고, 이를 다양한 조건에서 열처리하여 최종 스피넬계 $LiMn_{2-x}M_xO_4$ (M = Al, Mg, B) 양극소재를 제조하였다. 제조된 구형의 $LiMn_{2-x}M_xO_4$ (M = Al, Mg, B) 양극재료는 이종원소 치환량, 특히 Boron 치환량에 따라 입자 표면 및 내부의 치밀도가 변화하는 것을 확인할 수 있었으며, 치밀도가 증가함에 따라 소재의 출력특성이 향상되었으며, 최적 조성의 양극소재는 상온 5 C 용량이 0.2 C 용량 대비 90% 이상이 됨을 확인하였다. 또한 표면의 치밀도도 증가함에 따라 $60^{\circ}C$ 고온 충방전 조건에서 수명특성이 향상되어 500회 사이클 이후에도 초기용량의 80% 이상을 유지하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1499-1502
• /
• 2005

Dense $BaMgAl_{10}O_{17}:Eu^{2+}$ phosphor particles with a spherical shape have been synthesized through spray pyrolysis method using basic aluminum nitrate precursor as a spray solution. This $BaMgAl_{10}O_{17}:Eu^{2+}$ particles prepared by the spray pyrolysis have shown the stronger emission intensity compared to the commercially-available $BaMgAl_{10}O_{17}:Eu^{2+}$. However, thermal stability of the BAM:Eu b lue phosphor is very poor due to changing from $Eu^{2+}$ to $Eu^{3+}$ at the thermal process, so brightness of the phosphor decreases. To improve the thermal stability of the dense BAM:Eu phosphor, the spherical BAM:Eu particles were coated with pure $BaMgAl_{10}O_{17}$ layer using the hydrolysis reaction in a solution system. The synthesized powders were characterized by XRD, SEM and PL. On the other hand, the emission properties of the BAM:Eu phosphors coated with $BaMgAl_{10}O_{17}$ layer before and after thermal treatment at $500^{\circ}C$ for 30 min were estimated under VUV excitation. The brightness of the coated phosphor was higher than that of the uncoated phosphor. Also, the coating thickness of BAM layer in the BAM:Eu particles was optimized.