• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.32.1-32.1
• /
• 2011

39 K의 임계온도를 갖는 $MgB_2$ 초전도체를 이용한 전력에너지와 MRI 의료 기기로의 응용 가능성이 높아지고 있다. $MgB_2$ 초전도체 제조에 있어서 마그네슘과 반응성이 좋은 비정질의 붕소 원료 분말 가격이 비싼 반면 상대적으로 경제적인 결정질 분말의 기계적 밀링 공정을 이용하여 비정질화와 나노 입자로의 크기 감소 효과를 얻을 수 있다. 또한 탄소를 이용한 붕소 치환으로부터 고 자기장하에서 초전도 임계 성질을 향상시키고자 유, 무기물 형태의 여러 가지 탄소 소스를 개발하는 연구가 진행되어 왔다. 본 연구에서는 저가의 95~97% 순도, 약 1 ${\mu}m$ 이하 크기를 갖는 준결정상의 붕소 분말을 이용하여 기계적 밀링에 따른 붕소 분말의 비정질화 및 입자 나노화, $MgB_2$ 반응성 향상, $MgB_2$ 결정립 크기 감소 및 결정립계 피닝 증가에 의한 초전도 임계 물성 향상에 대하여 알아보았다. 또한 여러 시간 동안 밀링된 각 붕소 분말에 액체 글리세린을 이용한 탄소 도핑 전처리를 통하여 밀링 시간의 최적화를 알아보았고 이로부터 제조된 $MgB_2$ 초전도 벌크의 경우 적절한 임계온도 감소, 격자 왜곡 결함과 높은 결정립계 밀도 등에 의한 플럭스 피닝 향상으로 $MgB_2$ 초전도체의 임계전류밀도 및 비가역자기장이 증가함을 알 수 있었다. 즉, 경제성 있는 저급의 준결정상을 갖는 붕소 원료 분말의 입자 비정질 나노화 및 탄소 도핑 전처리를 통하여 $MgB_2$ 초전도 임계 물성을 향상시킬 수 있었다.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.18-22
• /
• 2006

We obtained in-situ $MgB_2$ thin films in an one-step process using ESSD (Evaporation Sputtering Simultaneous Deposition) method. In our approach. the Ma evaporator is designed specially Mg and B are simultaneously evaporated and sputtered, respectively, in the specially designed ESSD chamber. The background pressure was less than $1{\times}10^{-6}$ Torr. The substrate temperature was kept at 623 K. The film properties were investigated by both electrical resistivity and PPMS. As a result, typical $T_c$ of films was 11 K.

• 한국초전도학회:학술대회논문집
• /
• 2008.08a
• /
• pp.61-61
• /
• 2008

• 한국초전도학회:학술대회논문집
• /
• v.16
• /
• pp.56-56
• /
• 2006

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.3-4
• /
• 2002

The stainless steel sheathed MgB$_2$ tapes with Cu addition were fabricated by PIT method without heat treatment. The $J_{c}$ value of 5,600 A/ $cm^{2}$and 16,000 A/$cm^{2}$ at 4.2 K and 5 T were obtained for the $MgB_{2}$ tape and 10 vol % of Cu added $MgB_{2}$ tape respectively. The $J_{c}$-B curve shows enhancement in J$_{c}$ under magnetic field, which suggests enhancement in flux pinning property with Cu addition.n.

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.3-3
• /
• 2004

• 한국초전도학회:학술대회논문집
• /
• 2009.07a
• /
• pp.119-119
• /
• 2009

• Progress in Superconductivity
• /
• v.13 no.3
• /
• pp.184-188
• /
• 2012

$MgB_2$ superconducting sheets have been fabricated by powder rolling method using mixture of Mg and B powders. Sheet-type $MgB_2$ bulk samples of ~10 mm width and 50-100 mm long were squeezed out after compacted by two rotating rolls of 130 mm diameter with gap distance of 0.5 mm and speed of ~40 cm/min (~1 rpm). The nominal composition of Mg, which is ductile metal, was added up to 30% to facilitate forming the $MgB_2$ sheets. The annealed samples at $900^{\circ}C$ and 3 hrs showed superconducting transition temperature of ~32 K and critical current densities at zero fields were ${\sim}10^5A/cm^2$ at 5 K and ${\sim}5{\times}10^4A/cm^2$ at 20 K.

• Journal of Powder Materials
• /
• v.22 no.5
• /
• pp.344-349
• /
• 2015

$MgB_2$ bulk superconductors are synthesized by the solid state reaction of ($MgB_4$+xMg) precursors with excessive Mg compositions (x=1.0, 1.4, 2.0 and 2.4). The $MgB_4$ precursors are synthesized using (Mg+B) powders. The secondary phases ($MgB_4$ and MgO) present in the synthesized $MgB_4$ are removed by $HNO_3$ leaching. It is found that the formation reaction of $MgB_2$ is accelerated when Mg excessive compositions are used. The magnetization curves of $Mg_1+_xB_2$ samples show that the transition from the normal state to the superconducting state of the Mg excessive samples with x=0.5 and x=0.7 are sharper than that of $MgB_2$. The highest $J_c-B$ curve at 5 K and 20 K is achieved for x=0.5. Further addition of Mg decreases the $J_c$ owing to the formation of more pores in the $MgB_2$ matrix and smaller volume fraction of $MgB_2$.

• 한국초전도학회:학술대회논문집
• /
• 2008.08a
• /
• pp.13-13
• /
• 2008