• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.36-41
• /
• 2017

The effects of $MgB_4$ addition on the superconducting properties and the microstructure of in situ processed $MgB_2$ bulk superconductors were studied. $MgB_4$ powder of 1-20 wt.% was mixed with (Mg + 2B) powder and then pressed into pellets. The pellets of (Mg + 2B + $xMgB_4$) were heat-treated at $650^{\circ}C$ for 1 h in flowing argon. The powder X-ray diffraction (XRD) analysis for the heat-treated samples showed that the major formed phase in all samples was $MgB_2$ and the minor phases were $MgB_4$ and MgO. The full width at half maximum (FWHM) values showed that the grain size of $MgB_2$ decreased as the amount of $MgB_4$ addition increased. $MgB_4$ particles included in a $MgB_2$ matrix is considered to suppress the grain growth of $MgB_2$. The onset temperatures ($T_{c,onset}$) of $MgB_2$ with $MgB_4$ addition (0-10 wt.%) was between 37-38 K. The 20 wt.% $MgB_4$ addition slightly reduced the $T_{c,onset}$ of $MgB_2$ to 36.5 K. This result indicates that $MgB_4$ addition did not influence the superconducting transition temperature ($T_c$) of $MgB_2$ significantly. On the other hand, the small additions of 1-5 wt.% $MgB_4$ increased the critical current density ($J_c$) of $MgB_2$. The $J_c$ enhancement by $MgB_4$ addition is attributed not only to the grain size refinement but also to the possible flux pinning of $MgB_4$ particles dispersed in a $MgB_2$ matrix.

• Progress in Superconductivity
• /
• 제12권2호
• /
• pp.88-92
• /
• 2011

특수합금 등 금속분말을 이용하는 분말압연 공정을 적용하여 $MgB_2$ 판재를 제조하고 공정변수에 대한 특성을 조사하였다. 압연롤 간격 0.7 mm와 회전속도 0.7 rpm(~120 cm/min) 조건에서 두께 ~1 mm, 폭 ~100 mm, 그리고 길이 수 cm 크기의 $MgB_2$ 판재를 성공적으로 제조하였으며, 측정된 최고 밀도는 2.05 g/$cm^3$이고 이론 값 대비 약 78 %로 계산되었다. 분말압연 공정을 통해 최종 선재의 크기(특히 두께 측면에서)에 가깝게 공정을 시작할 수 있고 높은 충진 밀도를 유지할 수 있으므로 초전도 선재의 특성 향상과 더불어 생산 비용, 생산속도 측면에서도 매우 유리한 방법이 될 것이다. 또한 자기장하 $MgB_2$ 초전도 특성 향상을 위해 자속 고정점 역할을 할 다양한 도핑 물질(분말 형태 또는 액체 형태 등)을 첨가하는 공정에 있어서 도 본 분말압연 공정을 쉽게 적용될 수 있다.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.80-84
• /
• 2007

Charcoal was used as a carbon source for improving the critical current density of $MgB_2$ and the effect of annealing temperature on the $J_c$ of $MgB_2$ was investigated. The charcoal powder used in this study was $1{\sim}2$ microns in size and was prepared by wet attrition milling. $MgB_2$ bulk samples with a nominal composition of $Mg(B_{0.95}C_{0.05})_2$ were prepared by in situ process of Mg and B powders. The powder mixture was uniaxially compacted into pellets and heat treated at temperatures of $650^{\circ}C\;-\;1000^{\circ}C$ for 30 minutes in flowing Ar gas. It was found that superconducting transition temperature of $Mg(B_{0.95}C_{0.05})_2$ decreased by charcoal additions which indicates the carbon substitution for boron site. $J_c$ of $Mg(B_{0.95}C_{0.05})_2$ was lower than that of the undoped $MgB_2$ at the magnetic fields smaller than 4 Tesla, while it was higher than that of the undoped sample especially at the magnetic field higher than 4 T. High temperature annealing seems to be effective in increasing $J_c$ due to the enhanced carbon diffusion into boron sites.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.37-40
• /
• 2016

We have investigated the addition effect of NiO magnetic nanoparticles on crystal structure, microstructure as well as superconducting properties of $MgB_2$. NiO-added $MgB_2$ samples were prepared by the solid-state reaction method. The superconducting transition temperature ($T_c$) of 37.91 K was obtained for pure $MgB_2$, and $T_c$ was found to decrease systematically on increasing the addition level of NiO. X-ray diffraction (XRD) analysis revealed that no substitution of Ni for Mg in the lattice of $MgB_2$ was occurred. The microstructural analysis shows that the pure $MgB_2$ sample consists of plate shape $MgB_2$ grains, and the grains get refined to smaller size with the addition of NiO nanoparticles. At 5 K, high values of critical current density ($J_c$) were obtained for small amount NiO-added $MgB_2$ samples as compared to pure sample. The enhancement in $J_c$ could be attributed to the refinement of $MgB_2$ grains which leads to high density of grain boundaries in NiO-added $MgB_2$ samples.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.79-86
• /
• 2009

We successfully fabricated C-doped ex-situ $MgB_2$ wires using two different methods such as mechanical alloying(MA) and combined process(CP) of in-situ and ex-situ. In the MA, the precursor powder was prepared with a mixture of $MgB_2$ and 1 at% C powders by planetary ball milling for 0-100 h. In the CP, on the other hand, C-doped $MgB_2$ powder was prepared with Mg, B, and C powders by in-situ process via compaction, sintering, and crushing. The powders prepared by two methods were loaded into Fe tube and then the assemblages were drawn by a conventional powder-in-tube technique. The MA treatment of C-added $MgB_2$ decreased the particles/grains size and resulted in C-doping into $MgB_2$ after sintering, improving the critical current density($J_c$) in high external magnetic field. For the C-doped $MgB_2$ wire by MA for 25 h, the $J_c$ was $4.1{\times}10^3A/cm^2$ at 5 K and 6.4 T, which was 5.9 times higher than that of pure and untreated $MgB_2$ wire. The CP also provided C-doping into $MgB_2$ and improved the $J_c$ in high magnetic field; the C-doped $MgB_2$ wire fabricated by CP exhibited a $J_c$ being 2.3 times higher than that of the ex-situ wire used commercial $MgB_2$ powder at 5 K and 6.0 T($2.7{\times}10^3A/cm^2\;vs.\;1.2{\times}10^3A/cm^2$).

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.22-27
• /
• 2023

Magnetic properties of MgB₂ superconducting powder were investigated. M(H), the magnetic field H dependence of magnetization M, was measured and analyzed using a PPMS instrument. The MgB₂ superconducting powder showed high critical current density J_c > ~ 10⁷ A/cm² and clean limit superconducting properties. The equilibrium magnetization M_eq properties of MgB₂ powders exhibiting various superconducting properties were studied. We find that the equilibrium magnetization M_eq(H) properties of MgB₂ powders showing conventional BCS properties deviate from the predictions of the standard local-London theory at temperatures below T = 19 K and are in good agreement with the generalized nonlocal-London theory. Nonlocal-London analysis was used to determine and analyze the nonlocal parameters. The temperature dependence of the London penetration depth values λ(T) was studied.

• 한국식품저장유통학회지
• /
• 제22권6호
• /
• pp.838-844
• /
• 2015

본 연구에서는 천년초의 줄기와 열매를 동결 건조하여 분말화 한 후 기능성 성분으로 Vit. $B_1$, $B_2$, $B_3$, 루틴 및 베타카로틴 등의 비타민, 식이섬유, 조 사포닌을 분석하고, 물리적 특성으로 pH 및 색도, 보수력, 보유력, 팽윤력, 용적밀도, 점액물질 함량 및 수분흡수량을 조사하였다. 천년초 분말의 비타민을 측정한 결과 비타민 C(ascorbic acid)의 함량이 가장 많았으며 줄기가 42.14 mg, 열매가 105.21 mg으로 줄기의 약 2배 이상 더 높게 나타났다. Lutein의 함량은 줄기가 열매 보다 약 2.3배 정도 더 높게 나타났으며 ${\beta}$-carotene의 함량은 열매가 줄기보다 약 2.9배 정도 높은 함량을 나타내었다. 비타민 B의 경우 줄기와 열매의 함량이 각각 비타민 $B_1$(thiamin)는 0.16 mg 및 0.15 mg, 비타민 $B_2$(riboflavin)은 0.08 mg 및 0.12 mg으로 아주 적은양이 함유되어 있었으며 비타민 $B_3$(niacin)은 0.92 mg 및 1.01 mg으로 나타났다. 식이섬유는 줄기에서 수용성 식이섬유가 45.24%, 불용성 식이섬유가 22.15%로 열매보다 높게 나타났다. 조 사포닌은 줄기가 19.30 mg/g, 열매가 25.10 mg/g으로 나타났다. 물리적 특성의 pH는 줄기가 pH 5.34, 열매가 pH 5.07로 약산성이었고 보유력을 제외한 보수력, 용적밀도 및 팽윤력은 줄기가 높게 나타났으며 점질물질의 함량과 수분흡수량도 줄기가 열매보다 더 높게 나타났다. 이러한 결과 보아 천년초에 함유되어 있는 비타민류, 식이섬유 등은 천연 기능성 소재로 이용 가능하며 물리적 특성을 잘 이용한다면 가공적성 및 제품의 기호성을 증진시키는데 유용한 식품소재가 될 것으로 기대된다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2008년도 High Temperature Superconductivity Vol.XVIII
• /
• pp.61-61
• /
• 2008

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1994년도 춘계학술대회강연 및 발표대회 강연및 발표논문 초록집
• /
• pp.10-11
• /
• 1994

• Progress in Superconductivity
• /
• 제12권1호
• /
• pp.1-5
• /
• 2010

In this work we synthesized both MgB2 and Carbon doped MgB2 superconductor with Ag addition via high energy milling and substituent heat treatment. Heat treatments were performed at $900\;^{\circ}C$ for 30 min in flowing Ar gas. We varied amount of Ag powder. In a range of Ag powder was 0~5wt%. The effect of Ag was correlated with superconducting properties. The results show a slight decrease in critical temperature ($T_c$) and a reduction of critical current density ($J_c$) at high fields for the Ag-doped samples as compared to the un-doped samples. Reduction of $J_c$ may be due to the formation of MgAg compound.