• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.113-113
• /
• 2009

This paper describes the characteristics of a poly 3C-SiC micro heater which was fabricated on $AlN(0.1{\mu}m)/3C-SiC(1.0{\mu}m)$ suspended membranes by surface micro- machining technology. The 3C-SiC and AlN thin films which have wide energy bandgap and very low lattice mismatch were used sensors for high temperature and voltage environments. The 3C-SiC thin film was used as micro heaters and temperature sensor materials simultaneously. The implemented 3C-SiC RTD (resistance of temperature detector) and the power consumption of micro heaters were measured and calculated. The TCR (thermal coefficient of the resistance) of 3C-SiC RTD is about -5200 $ppm/^{\circ}C$ within a temperature range from $25^{\circ}C$ to $50^{\circ}C$ and -1040 $ppm/^{\circ}C$ at $500^{\circ}C$. The micro heater generates the heat about $500^{\circ}C$ at 10.3 mW. Moreover, durability of 3C-SiC micro heaters in high voltages is better than pt micro heaters. A thermal distribution measured and simulated by IR thermovision and COMSOL is uniform on the membrane surface.

• The Korean Journal of Physiology and Pharmacology
• /
• 제3권2호
• /
• pp.157-164
• /
• 1999

To determine molecular mechanisms of Aquaporin-CD (AQP2) gene regulation, the promoter region of the AQP2 gene was examined by transiently transfecting a promoter-luciferase reporter fusion gene into mouse renal collecting duct cell lines such as mIMCD-3, mIMCD-K2, and M-1 cells, and NIH3T3 mouse embryo fibroblast cells. PCR-Southern analysis reveals that mIMCD-3 and mIMCD-K2 cells express AQP2, but M-1 and NIH3T3 cells do not, and that the treatment with cpt-cAMP $(400\;{\mu}M)$) or forskolin/isobutylmethylxanthine (IBMX) increased the AQP2 expression in IMCD cells. In both IMCD and NIH3T3 cells, the constructs containing the promoter of AQP2 gene showed promoter activities, indicating lack of tissue-specific element in the 1.4 kb 5'-flanking region of the mouse AQP2 gene. Luciferase activity in the IMCD cells transfected with the construct containing 5-flanking region showed responsiveness to cpt-cAMP, indicating that the 1.4 kb 5'-flanking region contains the element necessary for the regulatory mechanism by cAMP. The promoter-luciferase constructs which do not have a cAMP-responsible element (CRE) still showed the cAMP responsiveness in IMCD cells, but not in NIH3T3 cells. Increase in medium osmolarity did not affect AQP2 promoter activity in mIMCD-K2 cells. These results demonstrate that AQP2 gene transcription is increased with cAMP treatment through multiple motifs including CRE in the 5'-flanking region of the gene in vitro, and the regulatory mechanism may be important for in vivo regulation of AQP2 expression.

• 한국재료학회지
• /
• 제13권4호
• /
• pp.246-250
• /
• 2003

Calcium phosphate was prepared by chemical reaction formula using Oyster shells and $H_3$$PO_4$solutions. After added to 0.1 M∼0.9$ M H_3$$PO_4$ solution for oyster shell, prepared powders were investigated for heating properties and formation phase with heat treatment temperatures. As the results of XRD analysis of heated powders at $500^{\circ}C$∼$1200^{\circ}C$,$ CaCO_3$ phases were observed at the temperature of below 900 TEX>$^{\circ}C$ and in the condition of 0.1 M∼0.9 M $H_3$$PO_4$ solutions. However, $CaCO_3$, $CaPO_3$(OH) and $Ca_3$($PO_4$)$_2$ phases were appeared at the temperature range between $500∼900^{\circ}C$ and in the solution of 0.7 M to 0.9 M $H_3$$PO_4$. $Ca_{ 5}$($PO_4$)$_3$(OH) and CaO phases due to the decarbonation of oyster shells($CaCO_3$) were appeared at above $1000^{\circ}C$ and in the solution of below 0.5 M $H_3$X$PO_4$. However in the case of above 0.7 M $H_3$$H_4$ solutions, $Ca_{5}$ ($PO_4$)$_3$(OH) was decomposed into $Ca_3$($PO_4$)$_2$ at more higher 100$0^{\circ}C$. Thus $Ca_3$(X$Ca_4$)$_2$ phases were appeared at higher than 100$0^{\circ}C$.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.13-18
• /
• 1985

Semiconductive $Ba_{0.9}Sr_{0.1}TiO_3$ was prepared by both the Calcining of mixed Oxides (C. M. O) and the Molten Salt Synthesis(M.S.S) methods to investigate the PTCR effects. In the Molten Salt Synthesis method the temperature of calcination for Synthesis of $BaTiO_3$ could be lowered from 110$0^{\circ}C$ to 80$0^{\circ}C$. The M.S.S Specimens had smaller grain size and more homogeneous size distribution at the same sintering temperature as compared with the C. M. O specimens. The M. S. S. specimens showed greater PTCR effects and current variations in the time vs. current charac-teristics than those of C. M. O Specimens.

• Advances in nano research
• /
• 제1권3호
• /
• pp.159-169
• /
• 2013

A preparation method for gadolinium compound (GdC) nanoparticles coated with silica ($GdC/SiO_2$) is proposed. GdC nanoparticles were prepared with a homogeneous precipitation method at $80^{\circ}C$ using $1.0{\times}10^{-3}$ M $Gd(NO_3)_3$, 0.5 M urea and $0-3.0{\times}10^{-4}$ M ethylenediarinnetetraacetic acid disodium salt dihydrate (ETDA) in water. As a result of preparation at various EDTA concentrations, GdC nanoparticles with a size as small as $40.5{\pm}6.2$ nm, which were colloidally stable, were prepared at an EDTA concentration of $2.0{\times}10^{-4}$ M. Silica-coating of the GdC nanoparticles was performed by a St$\ddot{o}$ber method at $35^{\circ}C$ using $1.0-10.0{\times}10^{-3}$ M tetraethylorthosilicate (TEOS), 11 M $H_2O$ and $1.5{\times}10^{-3}$ M NaOH in ethanol in the presence of $1.0{\times}10^{-3}$ M GdC nanoparticles. Performance of preparation at various TEOS concentrations resulted in production of $GdC/SiO_2$ particles with an average size of $106.1{\pm}11.2$ nm at a TEOS concentration of $5.0{\times}10^{-3}$ M. The gadolinium (Gd) concentration of $1.0{\times}10^{-3}$ M in the as-prepared $GdC/SiO_2$ particle colloid solution was increased up to a Gd concentration of 0.2 M by concentrating with centrifugation. The core-shell structure of $GdC/SiO_2$ particles was undamaged, and the colloid solution was still colloidally stable, even after the concentrating process. The concentrated $GdC/SiO_2$ colloid solution showed images of X-ray and magnetic resonance with contrast as high as commercial Gd complex contrast agents.

• 센서학회지
• /
• 제16권6호
• /
• pp.457-461
• /
• 2007

This paper describes the characteristics of poly (polycrystalline) 3C-SiC grown on $SiO_{2}$ and AlN substrates, respectively. The crystallinity and the bonding structure of poly 3C-SiC grown on each substrate were investigated according to various growth temperatures. The crystalline quality of poly 3C-SiC was improved from resulting in decrease of FWHM (full width half maximum) of XRD and FT-IR by increasing the growth temperature. The minimum growth temperature of poly 3C-SiC was $1100^{\circ}C$. The surface chemical composition and the electron mobility of poly 3C-SiC grown on each substrate were investigated by XPS and Hall Effect, respectively. The chemical compositions of surface of poly 3C-SiC films grown on $SiO_{2}$ and AlN were not different. However, their electron mobilities were $7.65{\;}cm^{2}/V.s$ and $14.8{\;}cm^{2}/V.s$, respectively. Therefore, since the electron mobility of poly 3C-SiC films grown on AlN buffer layer was two times higher than that of 3C-SiC/$SiO_{2}$, a AlN film is a suitable material, as buffer layer, for the growth of poly 3C-SiC thin films with excellent properties for M/NEMS applications.

• 대한소아치과학회지
• /
• 제34권3호
• /
• pp.532-542
• /
• 2007

연구 목적은 부정교합과 부분무치증 등의 치과 문제의 배경으로서 사람 진화에 따른 치열의 변화 양상을 고찰하는 것이었다. 사람은 분류학적으로 동물계, 척추문, 포유강, 영장목, 고등영장아목, Hominoid(상위인과), Hominid(인과), Homo(인속), sapiens(종)이다. 최초의 Hominid는 약 400만년 전에 출현한 Australopithecus로서 직립보행과 치열의 변화가 특징이었고, Homo속은 약 250만년 전에 출현한 최초의 석기 제작자 H. habilis를 시작으로, H. erectus, H. neanderthalensis 등이 나타났다가 사라지면서 현생 인류인 H. sapiens에 이르렀다. 원시포유류의 I3 C1 P4 M3의 치열은 원시영장류의 I2 C1 P4 M3, 고등영장류의 I2 C1 P3 M3, Hominoid의 I2 C1 P2 M3로 변화하였고 H. sapiens는 I2 C1 P2 M2의 치열로 변화하고 있다. Hominoid의 상자형 치열은 Australopithecus의 오메가형 치열을 거쳐 Homo의 포물선형 치열로 변화하였다. 치아의 크기가 계속 감소하였고 특히 견치의 크기와 성적 이형성이 감소하였다. 뇌 크기가 증가하고 악골의 크기가 감소함에 따라 치열은 두개관에 대해 후하방으로 이동하였다. 녹말이 풍부한 주식으로의 변화, 식품 가공, 요리 기술의 발달이 저작의 필요성을 감소시켜 치열 변화를 촉진하였다는 가설이 제기되었다. 지구 역사에서 극히 최근에 나타난 신종으로서 지구 전역에 퍼져 대량 멸종을 일으키고 있는 H. sapiens의 미래는 불투명하다. 부분무치증과 부정교합은 사람 진화에 따른 치열 변화와 관계가 있는 것으로 보이며 앞으로 증가할 가능성이 있다고 사료된다.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.999-1006
• /
• 1993

Si3N4(p)-SiC(p) composites were prepared by gas pressure sintering at 190$0^{\circ}C$ for 1 hour. $\alpha$-SiC with average particle size of 0.48${\mu}{\textrm}{m}$ were dispersed from zero to 50vol% in $\alpha$-Si3N4 with average particle size of 0.5${\mu}{\textrm}{m}$. Y2O3-Al2O3 system was used as sintering aids. When 10vol% of SiC was added to Si3N4, optimum mechanical properties were observed; relative density of 98.8%, flextural strength of 930MPa, fracture toughness of 5.9MPa.m1/2 and hardness value of 1429kg/$\textrm{mm}^2$. Grain growth of $\beta$-Si3N4 was inhibited as the amount of added SiC was increased. SiC particles were found inside the $\beta$-Si3N4 intragrains in case of 10, 20 and 30vol%SiC added composites.

• 열처리공학회지
• /
• 제23권3호
• /
• pp.156-162
• /
• 2010

The modified 9Cr-1Mo steel (P91 steel) is very popular as a boiler tube material of the USC (Ultra-Supercritical) power plants. The steels were tempered in the temperature range of 400 to $650^{\circ}C$ and the mechanical tests, such as impact and hardness tersts were performed at the room temperature for the tempered steels. A drop in the impact value (embrittlement) and the hardeness increase were simultanously observed in the range of temperature between $475^{\circ}C$ and $600^{\circ}C$, particularly at $550^{\circ}C$. TEM observation shows the hardening was caused by $M_2C$, resulting in the embrittlement. And the maximum volume fraction of $M_3C$ was also observed at $550^{\circ}C$, Therefore, the embrittlement seems to be caused by both the $M_2C$ and $M_3C$.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제28권3호
• /
• pp.247-252
• /
• 2021

Let M be a real hypersurface in a complex space form M_n(c), c ≠ 0. In this paper, we prove that if (∇_Xϕ)Y + (∇_Yϕ)X = 0 holds on M, then M is a Hopf hypersurface, where ϕ is the tangential projection of the complex structure of M_n(c). We characterize such Hopf hypersurfaces of M_n(c).