• Nuclear Engineering and Technology
• /
• v.16 no.2
• /
• pp.58-63
• /
• 1984

Paper electrophoretic separation of octahedrally bonded (Ruc $l_{6}$ )$^{3-}$ has been carried out by using the specially designed migration apparatus. The supporting electrolyte solutions are as follows: 0.1M-HCl $O_4$, 0.05 M-HCl+0.09M-KCl, 0.1M-HCl, 5$\times$10$^{-3}$ M-NTA, 0.01M-HCl, 0.01M-HCl $O_4$, 0.01M-citric acid, 0.01M-K $H_2$P $O_4$+0.01M-N $a_2$HP $O_4$, 0.05M-borax, 0.025M-N $a_2$C $O_3$+0.025M-NaHC $O_3$, 0.01M-N $a_3$P $O_4$, 0.01M-NaOH and 0.1 M-NaOH. The (Ruc $l_{6}$ )$^{3-}$ appears in 2 to 4 peaks and is found in several chemical species such as (RuCl ($H_2O$)$_{5}$ )$^{2+}$, cis and trans (RuC $l_2$($H_2O$)$_4$)$^{1+}$, (RuC $l_3$($H_2O$)$_3$)$^{0}$ , (RuC $l_4$($H_2O$)$_2$)$^{1-}$, (RuC $l_{5}$ ($H_2O$))$^{2-}$ and (RuC $l_{6}$ )$^{3-}$. The retention value has been found to be highest in the 0.025M-N $a_2$C $O_3$+0.025M-NaHC $O_3$ electrolyte solution.n.

• Korean Journal of Materials Research
• /
• v.10 no.7
• /
• pp.489-492
• /
• 2000

Three different white cast irons alloyed with Cr and Si were prepared in order to study their distribution be-havior in matrices and carbides. The specimens were produced using a 15kg-capacity high frequency induction fur-nace. Melts were super-heated to $1600^{\circ}C$, and poured at $1550^{\circ}C$ into a pepset mold. Three combinations of the alloys were selected so as to observe the distribution behavior of Cr and Si : 0.5%C-25.0%Cr-1.0%Si(alloy No. 1), 0.5%C-5.0%Cr-1.0%Si(alloy No. 2) and 2.0%C-5.0%Cr-1.0%Si(alloy No. 3). Cellular $M_7C_3$ carbides-$\delta$ferrite eutectic were developed at $\delta$ferrite liquid interfaces in the alloy No. 1 while only traces of $M_7C_3$ carbides-$\delta$ferrite eutectic were precipitated in the alloy No. 2. With the addition of 2.0% C and 5.0% Cr, ledeburitic $M_3C$ carbides instead of cellular $M_7C_3$ carbides were precipitated in the alloy No. 3. Cr was distributed preferentially to the $M_7C_3$ carbides rather than to the matrix structure while more Si was partitioned in the matrix structure rather than the $M_7C_3$ carbides. $K^m$ for Cr was ranged from 0.56 to 0.68 while that for Si was from 1.12 to 1.28. $K^m$ for Cr had a lower value with increased carbon contents. The mass percent of Cr was higher in the $M_7C_3$ carbides with increased Cr contents.

• Korean Journal of Materials Research
• /
• v.23 no.6
• /
• pp.329-333
• /
• 2013

The structural phase transformations of $0.7Pb(Mg_{1/3}Nb_{2/3})O_3-0.3PbTiO_3$ (PMN-0.3PT) were studied using high resolution x-ray diffraction (HRXRD) as a function of temperature and electric field. A phase transformational sequence of cubic (C)${\rightarrow}$tetragonal (T)${\rightarrow}$rhombohedral (R) phase was observed in zero-field-cooled conditions; and a $C{\rightarrow}T{\rightarrow}$monoclinic $(M_C){\rightarrow}$ monoclinic ($M_A$) phase was observed in the field-cooled conditions. The transformation of T to $M_A$ phase was realized through an intermediate $M_C$ phase. The results also represent conclusive and direct evidence of a $M_C$ to $M_A$ phase transformation in field-cooled conditions. Beginning from the zero-field-cooled condition, a $R{\rightarrow}M_A{\rightarrow}M_C{\rightarrow}T$ phase transformational sequence was found with an increasing electric field at a fixed temperature. Upon removal of the field, the $M_A$ phase was stable at room temperature. With increasing the field, the transformation temperature from T to $M_C$ and from $M_C$ to $M_A$ phase decreased, and the phase stability ranges of both T and $M_C$ phases increased. Upon removal of the field, the phase transformation from R to $M_A$ phase was irreversible, but from $M_A$ to $M_C$ was reversible, which means that $M_A$ is the dominant phase under the electric field. In the M phase region, the results confirmed that lattice parameters and tilt angles were weakly temperature dependent over the range of investigated temperatures.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.8 no.1
• /
• pp.77-88
• /
• 1981

The purpose of this study was to make a comprehensive study & evaluation of the oral status of mental retarded children. The auther examined intraorally 486 (male; 311, female;175) mental retarded children. The result was as follows; (General mental retarded children means the children who live in their parent's home, & orphan mental retarded children means the children who live in orphanage.) 1. The dft rate was 31.6% in general mental retarded children (G.m.r.c.) & 20.7% in orphan mental retarded children (O. m. r. c.). The dft index was 3.73 in G.m.r.c. & 2.15 in O.m.r.c. 2. The DMFT rate was 24.6% in female G.m.r.c., 16.7% in male G.m.r.c., 12.7% in female O.m.r.c., 8.4% in male O.m.r.c. The DMFT index was 4.94 in female G.m.r.c., 4.01 in male G.m.r.c., 1.40 in male O.m.r.c., 2.75 in female O.m.r.c. 3. The malocclusion prevalence was 57.3%. the class I malocclusion was 14.2% Class II malocclusion 19.3%, Class III malocclusion 23.5%. The children with Down's syndrome had 60.0% of class III malocclusion prevalence. 4. The dental calculus index was 1.97 in male O.m.r.c., 1.81 in female O.m.r.c., 1.30 in male G.m.r.e., 1.13 in female G.m.r.c. 5. The dental plaque index was 3.06 in female G.m.r.c., 3.00 in male Gm.r.e. 2.70 in male O.m.r,c., 2.32 in female O.m.r.c.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.2
• /
• pp.115-124
• /
• 1988

This study was carried out to realize the effect of gibberllic acid$(GA_3)$, 1-naphthaleneacetic acid(NAA) and indole-3-acetic acid(IAA) on the biosynthesis of vitamin C. The relation between carbohydrate metabolism and vitamin C production in soybean sprouts was also investigated. Growth, vitamin C content, protein, galactonolactone dehydrogenase(GLD), ribulose diphosphate carboxylase(RuDpCO) and RNA level in the plastid and cytoplasm were determined. The effects of protein and respiratory inhibitors on the growth and vitamin C production were also examined. The most favourable growth of soybean sprouts was observed at the level of NAA $10^{-8}M,\;IAA10^{-6}M\;and\;GA_3\;10^{-5}M$ in the single treatment, respectively, and also favourable at levels of $GA_3\;10^{-5}M+NAA\;10^{-9}M\;and\;GA_3\;10^{-5}M+IAA\;10^{-9}M$ in the case of mixed treatment. The excellent growth was observed at the level IAA $10^{-6}M$ among all the single and mixed treatments. When the soybean sprouts were treated with NAA $10^{-8}M,\;IAA\;10^{-6}M\;GA_3\;10^{-5}M,\;GA_3\;10^{-8}M+IAA\;10^{-6}M,\;and\;GA_3\;10^{-5}M+IAA\;10^{-9}M$, the maximum growth rate was observed at the level of IAA $10^{-6}M$ and the conten of vitamin C was 24.26mg% which was 1.6 times higher than that of the control. RuDpCO was inhibited by the chloramphenicol at the concentration that did not inhibit the growth but the activities of NADP-GDH, GLD and vitamin C content were not affected. These results showed that the biosynthesis of viamin C had nothing to do with the activity of chloroplastic RNA but with cytoplasm. The highest vitamin C content was found at the the level of IAA $10^{-6}M$, where the GLD activity increased up 1.8 times of the control. The concentration of IAA $10^{-6}M$ promoted the biosynthesis of RNa and protein both in chloroplast and cytoplasm, especially in the cytoplasm. Thus it suggeted that IAA affected vitamin C biosynthesis by regulating RNA level in the cytoplasm. 2,4-Dinitrophenol as an uncoupler of oxidative phosphorylation did not inhibit the vitamin C biosynthesis, however, all of the respiratory inhibitors severely inhibited the growth and vitamin C biosynthesis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.18-19
• /
• 2008

Polycrystalline(poly) 3C-SiC film is a promising structural material for M/NEMS used in harsh environments, bio and fields. In order to realize poly 3C-SiC based M/NEMS devices, the electrical properties of poly 3C-SiC film have to be optimized. The n-type poly 3C-SiC thin film is deposited by APCVD using HMDS$(Si_2(CH_3)_6)$ as single precursor and are in-situ doped using N2. Resistivity values as low as 0.014 $\Omega$cm were achieved. The carrier concentration increased with doping from $3.0819\times10^{17}$ to $2.2994\times10^{19}cm^{-3}$ and electronicmobility increased from 2.433 to 29.299 $cm^2/V{\cdot}s$.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.1
• /
• pp.57-64
• /
• 2016

Purpose : To evaluate the results of absorbed and effective doses using CBCT and 4D-CBCT settings for lung cancer. Materials and Methods : This experimental study. Measurements were performed using a Anderson rando phantom with OSLD(optically stimulated luminescent dosimeters). It was performed computed tomography(Lightspeed GE, USA) in order to express the major organs of the human body. Measurements were obtained a mean value is repeated three times each. Evaluations of effective dose and absorbed dose were performed the CL-IX-Thorax mode and Truebeam-Thorax mode CBCT. Additionally, compared Truebeam-Thorax mode CBCT with Truebeam-Thorax mode 4D-CBCT(Four-dimensional Cone Beam Computed Tomography) Results : Average absorbed dose in the CBCT of CL-IX was measured in lung 2.505cGy, heart 2.595cGy, liver 2.145cGy, stomach 1.934cGy, skin 2.233cGy, in case of Truebeam, It was measured lung 1.725cGy, heart 2.034cGy, liver 1.616cGy, stomach 1.470cGy, skin 1.445cGy. In case of 4D-CBCT, It was measured lung 3.849cGy, heart 4.578cGy, liver 3.497cGy, stomach 3.179cGy, skin 3.319cGy Average effective dose, considered tissue weighting and radiation weighting, in the CBCT of CL-IX was measured lung 2.164mSv, heart 2.241mSVv, liver 0.136mSv, stomach 1.668mSv, skin 0.009mSv, in case of Turebeam, it was measured lung 1.725mSv, heart 1.757mSv, liver 0.102mSv, stomach 1.270mSv, skin 0.005mSv, In case of 4D-CBCT, It was measured lung 3.326mSv, heart 3.952mSv, liver 0.223mSv, stomach 2.747mSv, skin 0.013mSv Conclusion : As a result, absorbed dose and effective Dose in the CL-IX than Truebeam was higher about 1.3 times and in the 4D-CBCT Truebeam than CBCT of Truebeam was higher about 2.2times However, a large movement of the patient and respiratory gated radiotherapy may be more accurate treatment in 4D-CBCT. Therefore, it will be appropriate to selectively used.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.472-476
• /
• 2001

Type and three-dimensional morphology of carbides precipitated in the X(X= 1.70, 1.92, 2.21, 2.50, 2.86)%C-5%Cr-5%V-5%Mo-5%W-5%Co multi-component white cast iron were investigated using an optical microscope and SEM. The types of carbides precipitated were MC, M$_2$C and M$_{7}$C$_{3}$. Morphology of the MC carbide took three forms, that it petal-like, nodular and coral-like. MC carbide seemed to change its morphology from petal-like through nodular, and finally to coral-like with an increase in carbon content. M7C carbide was classified into lamellar and plate-like type. The lamellar M$_2$C arbide precipitated in the iron with low molybdenum and tungsten contents, and higher contents of both elements in the iron were needed to form the plate-like M$_2$C carbide. The morphology of M$_{7}$C$_{3}$ was rod-like similar to that observed in high chromium white cast iron. However, cobalt does not affect the type and morphology of precipitated carbides.des.

• Korean Journal of Materials Research
• /
• v.12 no.5
• /
• pp.414-422
• /
• 2002

Three different multi-component white cast irons alloyed with Cr, V, Mo and W were prepared in order to study their as-cast and solidification structures. Three combinations of the alloying elements were selected so as to obtain the different types of carbides and matrix structures : 3%C-10%Cr-5%Mo-5%W(alloy No.1), 3%C-10%V-5% Mo-5%W(alloy No. 2) and 3%C-17%Cr-3% V(alloy No.3). The as-cast microstructures were investigated with optical and scanning electron microscopes. There existed two different types of carbides, $M_7C_3$ carbide with rod-like morphology and $M_6C$ carbide with fishbone-like one, and matrix in the alloy No. 1. The alloy No. 2 consisted of MC carbide with chunky and flaky type and needle-like $M_2C$ carbide, and matrix. The chunky type referred to primary MC carbide and the flaky one to eutectic MC carbide. The morphology of the alloy No. 3 represented a typical hypo-eutectic high chromium white cast iron composed of rod-like $M_7C_3$ carbide which is very sensitive to heat flow direction and matrix. To clarify the solidification sequence, each iron(50g) was remelted at 1723K in an alumina crucible using a silicon carbide resistance furnace under argon atmosphere. The molten iron was cooled at the rate of 10K/min and quenched into water at several temperatures during thermal analysis. The solidification structures of the specimen were found to consist of austenite dendrite(${\gamma}$), $ ({\gamma}+ M_7C_3)$ eutectic and $({\gamma}+ M_6C)$ eutectic in the alloy No. 1, proeutectic MC, austenite dendrite(${\gamma}$), (${\gamma}$+MC) eutectic and $({\gamma}+ M_2C)$ eutectic in the alloy No. 2, and proeutectic $M_7C_3$ and $ ({\gamma}+ M_7C_3)$ eutectic in the alloy No 3. respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.651-656
• /
• 2001

Ascorbic acid(AsA) is unevenly distributed throughout all body cells and fluids. Multiactivities of AsA in many biological systems and in various scientific fields were reported. In this study we aimed to clarify the inhibitory action of high concentration of AsA on the cell growth in 3T6 fibroblasts. The cells wee exposed to AsA at various concentration. It showed that 3T6 fibroblasts wee dead by the medium which contained AsA at the concentration higher than 0.5 mM. AsA caused hydrogen peroxide ($H_2O$$_2$) generation in a concentration dependent manner. These results suggested that the $H_2O$$_2$ was formed in the medium by AsA and acted as a cytotoxic gent. Moreover, it is supposed that hydroxyl radical (.OH) induced from $H_2O$$_2$also acetd as actively cytotoxic agent. This lethal effect of AsA causing the cell death was inhibited by the addition of catalase in the medium. Therefore, addition of AsA at the normal concentrations stimulate cell growth, but excess concentrations of AsA induce cell death.