• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.393-397
• /
• 2001

Fer the purpose of improving ductility of $Al_3$Ti intermetallic compound has potential to industrial application, we investigated formation behavior of cubic Ll$_2$ structure and effect of Mn addition. Nanocrystalline cubic Ll$_2$Al$_3$Ti intermetallic compound, has 10nm size of grain, was fabricated by mechanical alloying for 20hr at the composition of Al-8Mn-25Ti. Ternary cubic Ll$_2$Al$_3$Ti, added Mn, did not showed phase transformation from Ll$_2$ to D0$_{23}$ or D0$_{22}$ unlike binary cubic Ll$_2$Al$_3$Ti and maintained Ll$_2$ structure.

• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.634-640
• /
• 2002

To improve the ductility of mTEX>$(Al +12.5%Cu)<_3$Zr intermetallics, which are the potential high temperature structural materials, the mechanical alloying behavior, the effect of pressure and temperature on the $Ll_2$, phase formation and the behavior of the cold isostatic press and sintering were investigated. However mechanically alloyed A1$_3$Zr alloy have been known to have high mechanical strength even at high temperature, its workability was poor. A method of solution is refined grain size and phase transformation from $DO_{23}$ to $Ll_2$.$ Ll_2$ structure TEX>$(Al+12.5%Cu)<_3$Zr with nanocrystalline microstructure intermetallic powders where were prepared by mechanical alloying of elemental powders. Grain sizes of the as milled powders were less than 10nm (from transmission electron microscopy, TEM). Thermal analyses showed that $Ll_2$ structure was stable up to$ 800^{\circ}C$ for 1hour $(Al+ 12.5%Cu)<_3$Zr. $(Al+12.5%Cu)<_3$Zr has been consolidated by cold isostatic pressing (CIP 138, 207, 276, 414MPa) at room temperature and subsequent heat treatment at high temperatures where $Ll_2$ structure was stable under vacuum atmosphere. The results showed that 94.2% density of Ll$_2$ compacts was obtained for the (Al +12.5%Cu)$_3$Zr by sintering at 80$0^{\circ}C$ for 1hour (under CIPed 207MPa). This compact of the grain size was 40nm.

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.2
• /
• pp.47-53
• /
• 1991

Recrystallization behaviors of ordered and disordered structures in $Ll_2$ type $Ni_3Fe$ alloy were studied through hardness measurement and differential thermal analysis. When the disordered structure was isothermally aged at $480^{\circ}C$ below order-disorder transition temperature, the hardness of the structure was increased due to progressive ordering with increasing aging time. The hardness of the disordered structure was increased rapidly with increasing deformation degree up to 10%, and then gradually increased with further deformation degree. while the hardness of the ordered structure was increased rapidly with increasing deformation degree up to 10%, showing a constant hardness value up to 50% and gradually decreased with further deformation degree. The hardness of the ordered structure was higher than that of the disordered structure at all same deformation degrees. The recrystallization temperature of the ordered and disordered structures were decreased with increasing deformation degree. At the same deformation degrees, the recrystallization temperature of the ordered structure was lower than that of the desordered structure.

• Journal of architectural history
• /
• v.20 no.2
• /
• pp.55-70
• /
• 2011

This paper aimed at analyzing of structural carpentry terminology for bracket structure in Yingzaofashi ${\ll}$營造法式${\gg}$in the era of Song Dynasty and illuminating coinage characteristics and method of Structural Carpentry Terminology for bracket Structure through graphonomy research and system and structure of these terms. The results are as follow. The structural carpentry terminologies for structure were identified to be approximately 23 words, and terminology of bracket structure鋪作 is largely categorized into 3 categories of Type鋪作次序, Structure, Place. On the other hand, the structural carpentry terminologies for parts largely categorized into 2 categories of Bracket structure鋪作, Others. Bracket structure terminologies for parts were derived from the core of Dou枓, Gong栱, Ang昂, Fang方. The phenomena of derivation in structural carpentry terminology for bracket structure can be explained by the difference in the shape of subsidiary material and the location for usage of the subsidiary material and part of the subsidiary material and their functions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.765-772
• /
• 2006

The L2 Civil Signal (L2CS) will be transmitted by modernized IIR(IIR-M), IIF and all subsequent GPS satellites. It contains two codes of different length; CM code contains 10,230chips, repeats every 20milliseconds and is modulated with message data, and CL code contains 767,250chips, repeats every 1.5second Z-count and has no data modulation. And the message data is encoded for Forward Error Correction(FEC). The long code length is useful for weak signal, but it also requires very long acquisition time. Therefore, the structure of GPS Ll/L2C Correlator and the fast acquisition scheme are proposed in this paper.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.569-574
• /
• 2000

To improve the ductility of $Al_3Hf$ and $Al_3Ta$ intermetallic compounds, which are the potential temperature structural materials, the mechanical alloying behaviour and the effect of ternary additions on the $Ll_2$ phase formation were investigated. During the mechanical alloying by the SPEX mill, the $Ll_2$ $Al_3Hf$ intermetallic compound was formed after 6 hours of milling in AL-25%Hf system. In AL-25%Ta system, however, only the $D0_{22}$ $Al_3Ta$ intermetallic compound was formed until 30 hours of milling and the $Ll_2$ phase was not observed. In AL-12.5%M-25%Ta(M=Cu, Zn, Mn, Fe, Ni) systems, the additions of Cu and Zn had no effect on the $D0_{22}$ structure of the binary $Al_3Hf$ and the additions of Mn, Fe and Ni produced the amorphous phase. Therefore it was considered that these ternary additions could not overcome the energy difference between $Ll_2$ and $D0_{22}$ structures in the $Al_3Hf$ intermetallic compound. In AL-12.5%M-25%Hf(M=Cu, Zn, Mn, Fe, Ni)systems, the additions of Cu and Zn did not affect the $Ll_2$ structure of the binary $Al_3Hf$ but the additions of oMn, Fe and Ni produced the amorphous phase as they did in AL-12.5%M-25%Ta systems. Therefore, it was considered that the Ni, Mn and Fe additions promote the formation of amorphous phase in $Al_3X$ intermetallic compounds.

• Korean Journal of Materials Research
• /
• v.11 no.8
• /
• pp.629-635
• /
• 2001

To improve the ductility of $A1_3Hf$ intermetallics, which are the potential high temperature structural materials, the mechanical alloying behavior. the effect of Cu addition on the $Ll_2$ phase formation and the behavior of vacuum hot-pressed consolidation were investigated. During the mechanical alloying by SPEX mill, the $Ll_2 A1_3Hf$ intermetallics with the grain size of 7~8nm was formed after 6 hours of milling in Al-25at.%Hf system. The $Ll_2$ Phase of Al_3Hf$ intermetallics with the addition of 12.5at.%Cu, similar to that of the binary Al-25at.% Hf, was formed, but the milling time necessary for the formationof the $Ll_2$ phase was delayed form 6 hours to 10 hours. The lattice parameter of ternary $Ll_2(Al+Cu)_3Hf$ intermetallics decreased with the increase of Cu content. The onset temperature of $Ll_2$ to $D0_{23}$ phase in $Al_3Hf$ intermetallics was around 38$0^{\circ}C$, the temperature upon completion varied from 48$0^{\circ}C$ to 5$50^{\circ}C$ as the annealing time. The onset temperature of $Ll_2$ to $D0_{23}$ phase transformation in $(Al+ Cu)_3Hf$ intermetallics increased with the amount of Cu and the highest onset temperature of $700^{\circ}C$ was achieved by the Cu addition of 10at.%. The relative density increased from 89% to 90% with the Cu addition of 10at.% in $Al_3Hf$ intermetallics hot-pressed in vacuum under 750MPa at 40$0^{\circ}C$ for 3 hours. The relative density of 92.5% was achieved without the phase transformation and the grain growth as the consolidation temperature increased from 40$0^{\circ}C$ to 50$0^{\circ}C$ in $(Al+Cu)_3Hf$ intermetallics hot-pressed in vacuum under 750MPa for 3 hours.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.280-291
• /
• 2001

LL (Leased Line service) is a facility-based service as a traditional business data service, but new competition services, such as FR (Frame Relay), VPN (Virtual Private Network), and ATM (Asynchronous Transfer Mode), are value-added services. Because of different service classifications, it is hard to gather necessary data for the service providers to plan their market strategies and regulations and policies are also applied asymmetrically to each service provider. Therefore an appropriate market classification is required for the business data services. After various methods of market classification are reviewed, the Hendry model is selected in this paper to analyze substitution-degree among brands or among services. Since the structure of virtual competitions is required for the Hendry model to be applied to data service market, the market is analyzed first by the well-known Porter's model. By the analysis of Porter's model, two virtual competition structures are set up - one is for the competitions among leased line service providers, and the other is for the competitions among business data services such as LL, FR, VPN and ATM. After the Hendry model is applied to each competition structure, it is confirmed that 7 LL service providers do not compete directly, but 2 sub-markets exist for the LL service provisions. However, it is shown that 4 business data services compete directly. Using the Switching Probability Matrix from Hendry model, future market shares of LL service providers and market shares of business data services are forecasted. These empirical results are helpful for service providers to set competitive strategies with the minimization of cannibalization effect and they can easily and efficiently predict their market demands.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.638-643
• /
• 1994

The Si(ll1) surface structures induced by deposition of Au atoms were investigated by RHEED system. When Au atoms were deposited on the Si(ll1) $7\times7$ surfade, the dependence of structures and phases on the substrate temperatures and coverages was drastic. For O.1ML to 0.4ML of coverage the $7\times7$ structure changes to $7\times7$ + $5\times2$ structure as temperature increases to $350^{\circ}C$-$750^{\circ}C$. Between 0.4M1 to 1.OML the phase changed to $5 \times 2,\alpha- \sqrt{3} \times \sqrt{3},\beta- \sqrt{3} \times \sqrt{3}$ structure according to the substrate temperature and coverages. When the coverages exceeds O.SML, the 6 x 6 structure appears at the substrate temperature range between $270^{\circ}C$-$370^{\circ}C$ and compeletely transforms to 6 x6 at 1,OML. The isothermal desorption of Au on Si(ll1) surface investigated by using AES in the $\alpha- \sqrt{3} \times \sqrt{3},5 \times 2$ structures shows that the desorption energys of $\alpha- \sqrt{3} \times \sqrt{3}$ and 5 x 2 were 79Kcal/mol and 82 Kcal/mol respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1996.10a
• /
• pp.113-121
• /
• 1996

AI7075 alloy has been used for aircraft components since it has the advantage of high strength, high toughness, and high corrosion resistance. Many airframe components consist of various combinations of rib-web structure. In this study, various process paramenters such as die design, lubricant, ram speed, forging temperature have been investigated using the experiment and F.E.M. simulation to develop the precision forging technology for AI7075. When lubricant is applied to both material and die, shear friction factor is 0.1 which shows best effect of lubricant. It is specific corner radius of die that minimized forging load regarding process conditions, especially according to the ratio of the width of rib and web. In conclusion, optimum corner radius is 2~3mm when the width of rib and web is 3mm and 20mm respectively.