• 자연과학논문집
• /
• 제14권2호
• /
• pp.41-54
• /
• 2004

$LaMnO_3$(a=$5.51\AA$, c=$13.33\AA$) 페로브스카이트형 복합산화물에서 A site인 La자리에 Sr을 치환시킨 $La_{0.9}Sr_{0.1}MnO_3$(a=$5.33\AA$, c=$13.27\AA$)와 B site인 Mn을 Cu로 치환시킨 $LaMn_{0.9}Cu_{0.1}O_3$(a=$5.52\AA$, c=$13.31\AA$) 복합산화물을 Citrate sol-gel법을 이용하여 합성하였으며 분말 X-ray회절 분석기(XRD)을 이용하여 Rhombohedral의 페로브스카이트 구조임을 확인하였다. 수소 환원분위기에서의 TRR결과에 의하면 이들 산화물의 산소 화학양론은 $LaMnO_{3.16}$, $La_{0.9}Sr_{0.1}MnO_{3.10}$, $LaMn_{0.9}Cu_{0.1}O_{3.14}$의 조성을 갖는다. $LaMnO_3$는 2단계 환원반응을 일으키지만 각 자리를 치환시킨 $LaMnO_3$ 복합산화물은 3단계 환원반응을 일으켰다.

• 한국세라믹학회지
• /
• 제17권2호
• /
• pp.80-88
• /
• 1980

The sintering phenomena and piezoelectric properties of PZT ceramics of composition $Pb(Zr_{0.54} Ti_{0.46})O_3$ were investigated when a small quantity of $La_2O_3$ , $LaMnO_3$, $LaCrO_3$ were added. The unwanted chemical composition change in PZT during sinterin porces du to PbO evaporation poses a severe problem in PZt manufacturinig. It is observed tat an addition of small amount of $LaMnO_3$ to PZT markedly decreases the evaporation of PbO during sintering . The green compact of (1-x) PZT.xLaMnO3(x=0.02~0.10) could be sintered of under O2 atmosphere alone with no significant loss of PbO. The planar coupling factor kp of the sintered $0.98Pb(Zr_{0.54} Ti_{0.46})O_{3.0.02}LaMnO}3$ is similar to that of commercial PZT 6A. Microstructure investigation shows that part of sintering process of $Pb(Zr, Ti)O_3$.$LaMnO_3$ system progresses via liquid phase sintering. It is believed that the evaporation of PbO in PZT sintering is restricted by the addition of $LaMnO_3$ due to the above phenomena. Furthermore the solid solution of $LaMnO_3$ in PZT causes diffuses phase transition.

• 한국결정성장학회지
• /
• 제13권2호
• /
• pp.63-67
• /
• 2003

Synthesis of $PbLaTiO_{3}$ : Mn powders containing La and Mn was carried out using $PbO,\;TiO_{2},\;La_{2}O_{3}\;and\;MnO_{2}$ as starting materials by hydrothermal method. In the synthesis of single phase $PbLaTiO_{3}$ : Mn powder containing La and Mn, the optimal x value corresponding to La substitution was 0.01 which corresponds to $0.99(Pb_{1-x}La_{2x/3}TiO_{3})+0.01MnO_{2}$. The optimal conditions for the preparation of the powder synthesis were 8 M-KOH solvent of hydrothermal solvent, $270^{\circ}C$ of reaction temperature and 24 hrs of run time. It was found that the synthesized powders had spherical morphology with average particle size of 70 nm and specific surface area of $5.5\;m^{2}/g$.

• 대한화학회지
• /
• 제38권4호
• /
• pp.276-282
• /
• 1994

Citrate sol-gel법을 이용하여 perovskite형 복합산화물 LaBO$_3$(B = Mn, Fe, Co)을 공기 중 $850^{\circ}C$에서 24시간 동안 소성하여 제조하였다. X-선 회절분석(XRD)과 TPR결과에 의하면 이들 산화물의 결정구조와 산소화학양론은 LaMnO$_{3.16}$(a = 5.507, c = 13.329 $\AA$, hexagonal), LaFeO$_{3.17}$(a = 5.554, b = 5.555, c = 7.863 $\AA$, orthorhomibic), LaCoO$_{3.0}$(a = 5.436, c = 13.095 $\AA$, hexagonal)으로 수소 분위기(300torr)에서의 TPR결과에 의하면 이들 산화물은 2단계 환원반응으로 반응이 진행되며, 열적안정성은 LaMnO$_3$ > LaFeO$_3$ > LaCoO$_3$순으로 나타났고, 반응속도론적 결과 역시 LaCoO$_3$의 활성화에너지 값이 가장 낮음을 보였다.

• 한국재료학회지
• /
• 제16권1호
• /
• pp.44-49
• /
• 2006

Effects of doping rare earth element on Ln site of $Ln_{0.7}Ca_{0.3}MnO_3$ (Ln=Nd, Sm and La) were examined from sintering behavior, structure and magnetic properties. Sintering reactions proceeded rapidly in order of $La_{0.7}Ca_{0.3}MnO_3>Nd_{0.7}Ca_{0.3}MnO_3>Sm_{0.7}Ca_{0.3}MnO_3$. This result can be explained by diffusivity of metal cation. Size of a-axis increased as following order of La$Nd_{0.7}Ca_{0.3}MnO_3$, 93K for $Sm_{0.7}Ca_{0.3}MnO_3$ and 225K for $La_{0.7}Ca_{0.3}MnO_3$ were obtained. This result coincides with change of Mn-O bond length causing by a-axis lattice constant.

• 한국세라믹학회지
• /
• 제36권1호
• /
• pp.50-54
• /
• 1999

양이온 결손 La0.970Mn0.970O3의 x-ray photoemission spectroscopy를 온도를 함수로 측정하였다. 온도의 변화에 따라서 Mn 2p와 3d core level의 화학적 변동 및 이동이 관측되었다. 즉 Mn 2p 3/2와 1/2 및 La 3d core 스펙트럼은 온도의 증가와 함께 저 결합 에너지 측으로 이동이 관측되었다. 이러한 XPS 관측 결과는 Mn3+의 localization의 강도 변화에 의한 것으로 사료되며, Mn3+에 의한 Jahn-Teller효과 이외에도 conventional random potential 효과 역시 La0.790Mn0.970O3의 전도 carrier의 localization에 기여하는 것으로 사료된다.

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.900-904
• /
• 1992

High temperature electrical conductivity was measured for perovskite La0.98Sr0.02MnO3 at 200~130$0^{\circ}C$ as a function of Po2 and 1/T. Perovskite La1-xSrxMnO3 system is the typical oxygen electrode in solid oxide fuel cell (SOFC). Acetate precursors were used for the preparation of mixed water solution and the calcined powders were reacted with Na2CO3 flux in order to obtain highly reactive powders of perovskite La0.98Sr0.02MnO3. The relative density was greatly increased above 90% because of the homogeneous sintering. From the conductivity ($\sigma$)-temperature and conductivity-Po2 at constant temperature, the defect structure of La0.98Sr0.02MnO3 was discussed. From the slope of 1n($\sigma$) vs 1/T, the activation energy of 0.069 and 0.108eV were evaluated for above 40$0^{\circ}C$, respectively. From the relationship between $\sigma$ and Po2, it was found that the decomposition of La0.98Sr0.02MnO3 was occurred at 10-15.5 atm(97$0^{\circ}C$) and 10-11 atm(125$0^{\circ}C$). It is supposed that the improvement of p-type conductivity may be leaded by the increase of Mn4+ concentration through the substitution of divalent/monovalent cations for La site in LaMnO3.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.201-206
• /
• 2001

$>LaMnO_3$$(La, Sr)MO_3$, and $(La, Sr)MO_3/YSZ$ gel films were deposited by spin-coating technique on scandium-doped zirconia (YSZ) substrate using the precursor solution prepared from $La(O-i-C_3H_7)_3$, $Co(CH_3COO)_2$or $Mn(O-i-C_3H_7)_2$,2-methoxyethanol, and polyethylene glycol. By heat-treating the gel films, the electrochemical cells, $(La, Sr)MnO_3{\mid}ScSZ{\mid}Pt$ were fabricated. The effect of polyethylene glycol on the microstructure evolution of $$LaCoO_3and $LaMnO_3$thin films was investigated, and NOx decomposition characteristics of the electrochemical cells were investigated at $500^{\circ}C$ to $600^{\circ}C$. By applying a direct current to the $(La, Sr)MnO_3{\mid}ScSZ{\mid}Pt$ electrochemical cell, good NOx conversion rate could be obtained relatively at low current value even if excess oxygen is included in the reaction gas mixture.

• 한국세라믹학회지
• /
• 제37권6호
• /
• pp.612-616
• /
• 2000

The effect of Co dopant on the (La, Sr)MnO3 cathode was investigated. La2Zr2O7 and SrZrO3 were formed as the reaction products between YSZ and LSMC. The reactivity of LSMC with YSZ increased with increasing Co content. However, the cathodic polarization resistance decreased with increasing Co doping. Therefore, doping Co at Mn site in the (La, Sr)MnO3 cathode was effective on controlling the polarization resistance of the cathode. The polarization property of LSMC-YSZ composite(60 wt%: 40 wt%) cathode was better than that of LSMC single cathode.

• Journal of Magnetics
• /
• 제11권4호
• /
• pp.164-166
• /
• 2006

We have investigated the dielectric and magnetic properties of ferroelectric-antiferromagnetic $BaTiO_{3}-LaMnO_{3}$ composite with changing relative mole percents. Due to high sintering temperature, i.e. $1150^{\circ}C$, the Ba ion in $BaTiO_{3}$ seems to diffuse into $LaMnO_{3}$; resulting in $BaTiO_{3}-(La,Ba)MnO_{3}$ ferroelectric-ferromagnetic composite. At room temperature, $0.9BaTiO_{3}-0.1LaMnO_{3}$ composite exhibits considerable magnetization (${\sim}0.7\;emu/g\;at\;2000\;Oe$) and low coercive field (${\sim}5\;Oe$). Also it exhibits high dielectric constant (${\sim}560$) and low loss (${\sim}0.08$) at 10 kHz. This result may imply that $BaTiO_{3}-LaMnO_{3}$ could be suitable for a low leakage multiferroic composite.