• ETRI Journal
• /
• v.42 no.5
• /
• pp.781-789
• /
• 2020

In this study, an E-band low-noise amplifier (LNA) monolithic microwave integrated circuit (MMIC) has been designed using silicon-germanium 130-nm bipolar complementary metal-oxide-semiconductor technology to suppress unwanted signal gain outside operating frequencies and improve the signal gain and noise figures at operating frequencies. The proposed impedance-controllable filter has series (R_s) and parallel (R_p) resistors instead of a conventional inductor-capacitor (L-C) filter without any resistor in an interstage matching circuit. Using the impedance-controllable filter instead of the conventional L-C filter, the unwanted high signal gains of the designed E-band LNA at frequencies of 54 GHz to 57 GHz are suppressed by 8 dB to 12 dB from 24 dB to 26 dB to 12 dB to 18 dB. The small-signal gain S₂₁ at the operating frequencies of 70 GHz to 95 GHz are only decreased by 1.4 dB to 2.4 dB from 21.6 dB to 25.4 dB to 19.2 dB to 24.0 dB. The fabricated E-band LNA MMIC with the proposed filter has a measured S₂₁ of 16 dB to 21 dB, input matching (S₁₁) of -14 dB to -5 dB, and output matching (S₂₂) of -19 dB to -4 dB at E-band operating frequencies of 70 GHz to 95 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.338-346
• /
• 2018

In this paper, a monopole antenna applicable to WLAN/WiMAX system is designed and fabricated. The proposed antenna is designed to have three lines and one slit based on microstrip feeding to have triple band characteristics. We optimized the lengths and slits of the three lines to obtain the required characteristics for this paper. The proposed antenna has $32.0mm(W2+W3){\times}47.1mm$ (L3+L4+L5+L8) on a dielectric substrate of $42.5mm(W1){\times}52mm(L1){\times}1.0mm$ size. From the fabrication and measurement results, bandwidths of 158 MHz (813 to 971MHz), 630 MHz (2.10 to 2.73GHz) and 1190 MHz (4.83 to 6.02GHz) were obtained based on the impedance bandwidth. The fabricated antenna also obtained the measured gain and radiation pattern in the required triple band.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.6
• /
• pp.367-374
• /
• 2017

Background: An imbalance in energy intake and expenditure can cause obesity, which is a major risk factor for chronic diseases such as heart disease, type 2 diabetes, insulin resistance, cancers and hyperlipidemia. Methods and Results: In this study, we evaluated the anti-obesity effects of a water extract from the young leaves of barley sprout (BS) in 3T3-L1 cells and in high-fat diet (HFD)-induced obese mice (HF). Lipid accumulation measurement indicates that BS markedly inhibited adipogenesis by reducing lipid droplet production in a dose-dependent manner. Furthermore, the mRNA expression of adipogenic transcription factors peroxisome proliferator-activated receptor-${\gamma}$ and fatty acid synthetase, CCAAT/enhancer binding protein-${\alpha}$ and fatty acid binding protein 4 in 3T3-L1 cells was significantly inhibited by BS treatment. In an in vivo test, the BS-administered group of HFD-induced mice showed less body weight gain, and lower liver and epididymal white adipose tissue weights. The BS-treated mice showed decreased serum levels of leptin and lipids compared to untreated HFD mice and the levels of adiponectin and the HDL-cholesterol/total cholesterol ratio increased. These results indicate that BS inhibits body fat accumulation by reducing the mRNA expression of lipogenesis transcription factors and increasing serum adipokine concentration in in vitro and in vivo tests. Conclusions: BS reduced high fat diet-induced weight gain and had a positive effect on dyslipidemia.

• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.129-137
• /
• 2016

This study investigated the effect of dietary lysine and gamma-linolenic acid(GLA) levels on growth performance, carcass traits, and meat quality in finishing pigs. Pigs were provided with feed containing two different levels of lysine(0.45% and 0.75%) with three different levels of gamma-linolenic acid(0.0, 0.3, and 0.6%). Average daily gain(ADG) was significantly lower (p<0.01) in pigs provided with the lower level of lysine. In contrast, feed/gain(p<0.01), diet cost/gain(p<0.05), and intramuscular fat(p<0.01) were all significantly higher in pigs fed the lower level of lysine. Similarly, meat color scores(CIE L*, a*, and b*) and cooking loss were significantly higher(p<0.01) in pigs fed the lower level of lysine, whereas shear force(kg/2.5 inch2)was not affected by dietary lysine. The addition of GLA had no significant effect on any of the parameters measured. The results indicate that providing pigs with 0.45% lysine in their diet may help to increase intramuscular fat content, allowing the industry to produce pork products that meet consumer needs in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.5
• /
• pp.681-685
• /
• 2009

L-carnitine promotes mitochondrial ${\beta}$-oxidation of long chain fatty acids and their subsequent transport across the inner mitochondrial membrane. Although the role of L-carnitine in fatty acid metabolism has been extensively studied, its role in live performance and carcass responses of commercial broilers is less understood. The objective of this research was to determine if Lcarnitine fed at various levels in diets differing in CP and amino acids impacted on live performance and carcass characteristics of commercial broilers. Two floor pen experiments were conducted to assess the effect of dietary L-carnitine in grower diets. In Exp. 1, Ross${\times}$Hubbard Ultra Yield broilers were placed in 48 floor pens (12 birds/pen) and fed common diets to d 14. A two (0 or 50 ppm Lcarnitine) by three (173, 187, and 202 g/kg CP) factorial arrangement of treatments was employed from 15 to 35 d of age (8 replications/treatment). An interaction (p<0.05) in carcass yield indicated that increasing CP (187 g/kg) resulted in improved yield in the presence of L-carnitine. Increasing CP from 173 to 202 g/kg increased (p<0.05) BW gain and decreased (p<0.05) feed conversion and percentage abdominal fat. Feeding dietary L-carnitine increased back-half carcass yield which was attributable to an increase (p<0.05) in thigh, but not drumstick, yield relative to carcass. In Exp. 2, $Ross{\times}Ross$ 708 broilers were fed common diets until 29 d. From 30 to 42 d of age, birds were fed one of seven diets: i) 200 g/kg CP, 0 ppm L-carnitine; ii) 200 g/kg CP, 40 ppm L-carnitine; iii) 180 g/kg CP, 0 ppm L-carnitine; iv) 180 g/kg CP, 10 ppm L-carnitine; v) 180 g/kg CP, 20 ppm L-carnitine; vi) 180 g/kg CP, 30 ppm L-carnitine; and vii) 180 g/kg CP, 40 ppm L-carnitine (6 replications of 12 birds each). BW gain, feed conversion, mortality (30 to 42 d), and carcass traits (42 d) were measured on all birds by pen. There were no treatment differences (p<0.05). However, the addition of 40 ppm L-carnitine in the 200 g CP/kg diet increased (p = 0.06) thigh yields relative to BW in comparison to birds fed diets without L-carnitine, which was further confirmed via a contrast analysis (0 vs. 40 ppm L-carnitine in the 200 and 180 g CP/kg diets; p<0.05). These results indicated that dietary L-carnitine may heighten metabolism in dark meat of commercial broilers resulting in increased relative thigh tissue accretion without compromising breast accretion.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.10-17
• /
• 1989

A new design method of lossy matching network for the microwave broadband ampilfier is presented by using seattering parameters instead od modeling of transistor. A lossy matching network is represented as the combination of 2 lossless networks between which lossy serial or parallel immittance is inserted without using specific topology, and so many useful matching cireuits can be realized. Also it is shown that linear transforming relation exists between gain and reflection coefficient of the amplifier, and the transforming equation is derived using scattering parameters. With this equation some constant gain circles can be drawn on reflection coefficient plane to get adequate reflection coefficient and gain. And since the relations between amplifier gain/reflection coefficient and the immittance of passive element are bilinear transformations. constant gain or reflection coefficients circles. Illustrative examples are presented to show the usefulness of proposed method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.34-41
• /
• 2003

In this paper, 60GHz band transmitter and receiver for wireless LAN are designed and implemented using the broband amplifier and mixer fabricated by standard 0.1${\mu}{\textrm}{m}$ MIMIC process of MINT. Output power and gain of the RF transmitter are 0 ㏈m and 1.7㏈, respectively. Noise figure and gain of the receiver are 4.2㏈ and l5.7dB, respectively. Considering the sensitivity and LOS test, this system can communicate with BER of below than 10$^{-6}$ at a distance more than 35m. DSSS, which is strong for concealment and disturbance, is adopted.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.983-984
• /
• 2006

Multi-band VCO with fast response adaptive frequency calibration (AFC) technique is designed in 1.8V $0.18{\mu}m$ CMOS process. The possible operation is verified for 5.8GHz band, 5.2GHz band, and 2.4GHz band using the switchable L-C resonators for 802.11a/b/g WLAN applications. To linearize its frequency-voltage gain, optimized multiple MOS varactor biasing technique is used. In order to operate in each band frequency range with reduced VCO gain, 4-bit digitally controlled switched-capacitor bank is used and a wide-range digital logic quadricorrelator is implemented for fast frequency detector.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.3
• /
• pp.3-8
• /
• 2008

In this paper, an planar antenna which has omnidirectional radiation pattern in H-plane and low profile is proposed. By adding inductance elements of an ENG shell structure, a capacitance element of an electrically small antenna is easily achieved with impedance matching. An ENG shell structure is consist of a inductive loading structure which has symmetrical four stepped L-shape slots. The simulated result shows, the impedance bandwidth of the proposed antenna is 150MHz (2.5 ~ 2.65GHz). The simulated maximum radiation gain of proposed antenna is 1.12 dBi at center frequency 2.56GHz. Omnidirectional radiation pattern is achieved. The proposed antenna will be applied to wireless lan access point system.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1477-1478
• /
• 2011

Solution processed zinc tin oxide (ZTO) thin films were studied using a spin coating for the fabrication of thin film transistors and simple circuits. The solution processed thin film transistors (W/L = 100/10 ${\mu}m$) have the average saturation mobility of 1.9 $cm^2$/Vs, threshold voltage of 20 V, and subthreshold slope of 0.5 V/decade. The dc characteristics of an inverter with $W_{load}=100\;{\mu}m$ and $W_{drive}=10\;{\mu}m$, measured under votage supply of $V_{DD}$ = +50 V. The inverter beta ratio is 20 ($R=(W_{drived}/L_{drive})/(W_{load}/L_{load})=20$) and $gain_{max}$ is 2. The characteristics of an oscillator were measured under voltage supply of $V_{DD}$ = +60 V.