• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.2
• /
• pp.54-61
• /
• 2007

Propellant pressurization system in liquid rocket propulsion system plays a role supplying pressurant gas at a controlled pressure into the ullage space of propellant tanks. The most important design parameter for such propellant pressurization system is the temperature of pressurant gas fed from pressurant tank. Such pressurant is gaseous state, of which density is very sensitive to the temperature of pressurant. Generally for the propulsion system, which requires high thrust and is consisted of cryogenic propellant the pressurant is stored at high density and high pressure to reduce the weight of pressurant tanks, which are placed inside of cryogenic propellant tank. That is called cryogenic storage pressurization system. This study investigates the temperature variation of pressurant at the time when the pressurant is coming out of pressurant tank experimentally as well as numerically. Fluids used in this study are air and liquid oxygen as outer fluid and gaseous nitrogen and gaseous helium as pressurant respectively.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In this study, a configuration design of a CH₄/LOx small rocket engine was made and test system was established for the performance evaluation. A coaxial swirl injector was chosen because of its remarkable atomization performance and low combustion instability. Three aspect ratios for the combustion chamber configuration, i.e., 1.5, 1.8, and 2.1 were also set for the comparison of the combustion efficiency. The reliability of the thrust measurement rig was enhanced by pre-and post-calibration process. From the preliminary ground hot-firing test, the measured thrust and specific impulse values were 89.2 N and 181.8 s, respectively, which were 21.6% lower than the ideal values. In addition, the efficiency of characteristic velocity was measured as 84.2%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.137-142
• /
• 2008

Ignition characteristics of combustion chamber with LOx lead cyclogram for liquid rocket engine were described. The combustion chamber has chamber pressure of 60 bar, propellant mass flow rate of 89 kg/s, and nozzle expansion of 12. Cold flow test to determine the filling time of propellant for cyclogram with LOx lead supply, ignition test to check the ability to ignite starting fuel from the ignitor, low pressure combustion test to check the propagation of flame into main fuel-oxidizer mixture from starting fuel and the main combustion stage, and design point combustion test to check the combustion performance were performed. Ignition and combustion tests with LOx lead supply were successfully performed and the stable cyclogram of start sequence for combustion chamber was developed.

• Korean journal of applied entomology
• /
• v.35 no.3
• /
• pp.221-227
• /
• 1996

Four strains of Beauveria bassiana F101, F587, F9 and FJ8, were received from Forestry Research Institute,Seoul. The strain, B. bassiana F101, was the most active in the enzymatic activity and spore production. Whenspores of B. bassiana FlOl were sprayed on the female larva of the black tipped sawfly with various concentrationsof 6 xl 0'~-10s~p ores/ml, insects started to die from 5-7 days, and were covered with mycelia andspores in 24-28 days at 25"C, while the insect did not show visible symptoms even after 50 days at 4'C. Theinsect injected with 5 pl of spore solution (3X l0'~-10s~p oreslml) died within 30-98 and 38-218 hours at25$^{\circ}$C and 4"C, respectively. About 3 days (60 hours) after the injection with a concentration of 3 x lo9 spores1ml, at the point of the insect's death, lots of proteins started to disappear '||'&'||' the hemolymph, fat body and carcaseat 25'C. Esterase activity in the tissues was gone suddenly after that time. Six days after the spray, manyprotein and esterase bands were lost in the hemolymph, but not those in the fat body and carcase. When thefungi growing in the host were exposed in the air, they put energy for spore production, while numerous longand thin mycelia branched out from the host body in the soil.e host body in the soil.

• Korean Journal of Microbiology
• /
• v.35 no.3
• /
• pp.218-225
• /
• 1999

We isolated the ANRI fragment from Aspergillus nidulons that could autononlously replicate and enhance transformation efficiency about $10^4$ fold compared lo the integrative vector in Saccha,omgcer cerevisioe. In A. nidulans recombinant plasmid pLJ16-4.5 which carries the 4.5 kb EcoRI fragment of ANRI showed a 170-[old increase of transformation efficiency compared to the integrative vector pLJ16 and could be recovered from iransfonnants as an intact form. Estimated copy number of transforming plasmid pLJ16-4.5 was scored as 2 to 3 copies in transformed A. nidulans. Recoinbinant plasinid pILJ16-4.5 is inilotically unstable; being lost Irom 65% of aswual progeny of transformants on selective medium and 90% on complete medium. Southern analysis of transformant DNA showed that the pILJ16-4.5 is maintained in free form. The sequencing data showed that ANRl fragment was originated from mitochondiral DNA of A. nid~ilans and contained high AT content as much as 74.7%. One ARS consensus sequence (A/T)TTr4T(A/G)TTT(AiT). I I ARS-like sequence (agreement 10 of 11) and ABFl binding core consensus sequence (TCN7ACG). Also six gyrase binding core consensus sequence (YRTGNYNNY: y=C or T, R=A or G, N=A, G, C or T) of $\Phi$X174 and SV40 DNA and one b site (CACTTTACC) combining with gyrase in ColEl are shown. ANRl can be developed as a repl&ng plasinid for lransfoimation system in A. nirlulmis.

• The Korean Journal of Pesticide Science
• /
• v.9 no.4
• /
• pp.303-310
• /
• 2005

This study was performed to examine analytical method of a quinolone compound, oxolinic acid in paddy soil by HPLC coupled with UV detector. Two types of soil texture in different regions were used for this experiment. Oxolinic acid was extracted by a 4 M-KOH : MeOH(1 : 3, v/v) mixtures and acidified followed by liquid-liquid partitioning in dichloromethane. Dichlormethane layer was dehydrated, evaporated and analyzed by HPLC (262 nm). Retention time was 10.2 min. The standard calibration curve of oxolinic acid showed linearity ($r^2>0.999^{**}$, y=378.99x+135.08) in the range of $1{\sim}40$ ng. The mean recoveries, evaluated from fortified soil samples at two concentration levels of 0.2 mg/kg and 1.0 mg/kg, were $90.9{\pm}4.52%$(C.V. 4.97%) and $95.0{\pm}0.23%$(C.V. 0.24%) for soil 1 and $92.2{\pm}1.15%$(C.V. 1.25%) and $93.1{\pm}0.31%$ (C.V. 0.33%) for soil 2, respectively The detection limits of two types of soils were same as 0.05 ppm. Overall, the present analytical method of oxolinic acid by HPLC coupled with UV detector seems to be used reasonably.

• Journal of Genetic Medicine
• /
• v.8 no.1
• /
• pp.1-16
• /
• 2011

Owing to the risk of fetal loss associated with prenatal diagnostic procedures (amniocentesis, chorionic villus sampling), noninvasive prenatal diagnosis (NIPD) is ultimate goal of prenatal diagnosis. The discovery of circulating cell-free fetal DNA (cffDNA) in maternal plasma in 1997 has opened up new probabilities for NIPD by Dr. Lo et al. The last decade has seen great development in NIPD. Fetal sex and fetal RhD status determination by cffDNA analysis is already in clinical use in certain countries. For routine use, this test is limited by the amount of cell-free maternal DNA in blood sample, the lack of universal fetal markers, and appropriate reference materials. To improve the accuracy of detection of fetal specific sequences in maternal plasma, internal positive controls to confirm to presence of fetal DNA should be analyzed. We have developed strategies for noninvasive determination of fetal gender, and fetal RhD genotyping using cffDNA in maternal plasma, using real-time quantitative polymerase chain reaction (RT-PCR) including RASSF1A epigenetic fetal DNA marker (gender-independent) as internal positive controls, which is to be first successful study of this kind in Korea. In our study, accurate detection of fetal gender through gestational age, and fetal RhD genotyping in RhD-negative pregnant women was achieved. In this assay, we show that the assay is sensitive, easy, fast, and reliable. These developments improve the reliability of the applications of circulating fetal DNA when used in clinical practice to manage sex-linked disorders (e.g., hemophilia, Duchenne muscular dystrophy), congenital adrenal hyperplasia (CAH), RhD incompatibility, and the other noninvasive pregnant diagnostic tests on the coming soon. The study was the first successful case in Korea using cffDNA in maternal plasma, which has created a new avenue for clinical applications of NIPD.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.3
• /
• pp.275-283
• /
• 2013

An injector that uses methane gas ($CH_4$) and liquid oxygen ($LO_x$) as propellants was designed to verify the combustion characteristics of an engine that uses methane, which is one of the next-generation propellants. A swirl/shear coaxial-type injector was used, and flow analysis was performed using Fluent to determine the main design parameters of the injector. A hydraulic test was performed to understand the atomization and spray pattern characteristics of the injector. Next, a combustion test was performed at the design point to understand the ignition and combustion stability. Additional combustion tests were performed according to the O/F ratio to investigate the combustion characteristics and stabilities using the characteristic exhaust velocity ($C^*$) and fluctuation of the chamber pressure. The experimental results showed that the combustion efficiency was greater than 90%, and the pressure fluctuation was lower than 2% under all conditions.

• Korean journal of applied entomology
• /
• v.35 no.1
• /
• pp.80-84
• /
• 1996

Infectivity of entomopathogenic nematodes and fungus was evaluated against fly larvae in the laboratory and outhouses. Mortalities of Muscina stabulans larvae were 96.7f 2.8% in Steinernema glaseri Dongrae strain, 90.0+0.0% in S. carpocapsae All strain, 86.7f 2.7% in Heterorhabditis bacteriophora Hamyang strain, and 70.0+9.4% in S. carpocapsae Pocheon strain on the filter paper. When 260, 000 nem\ulcornertodes were sprayed into the outhouses, H. bacterwphora Hamyang strain killed 100%, S. glaseri Dongrae strain killed 76.9+3.9%, and S. carpocapsae Pocheon strain killed 58.5+6.1% of maggots. When 130, 000 nematodes and 7.0X lo9 cfu of entomopathogenic fungus, Beauveria brongniartii were sprayed alone or combined into outhouses, mortalities of maggots were 73.6+0.1% in B. brongniartii alone, 77.8+3.9% in S. carpocapsae Pocheon strain plus B. brongniartii, and 77.7f 5.1% in H. bacteriophora Hamyang strain plus B. brongniartii. Entomopathogenic nematodes and fungus were potential biological control agents in this study.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.383-389
• /
• 2020

Mesoporous silica solid catalysts modified with sulfonic acid were prepared for cationic ring-opening polymerization of octamethylcyclotetrasiloxane (D₄). Two sets of MCM-41 (1.7 and 2.8 nm) and SBA-15 (8.1 and 15.9 nm) with different pore sizes were used as catalyst supports. The surface of silica materials was modified with (3-mercaptopropyl)trimethoxysilane by silylation reaction and oxidized to sulfonic acid. The structures of the prepared catalysts were examined by X-ray diffraction and nitrogen adsorption-desorption. The pore size, specific surface area, and pore volume of the modified solid catalysts decreased slightly. In addition, the modification of the sulfonic acid on the silica surface was confirmed by using infrared spectroscopy and nuclear magnetic resonance spectroscopy. To observe the effect of the particle size on the catalytic activity, it was observed with a scanning electron microscope. The catalysts were used to synthesize PDMS through a ring-opening polymerization of D₄, and the conversion and polymerization rate of the polymerization reaction depended on the pore size, specific surface area, particle size, and particle agglomeration of the catalysts. In order for the polymerization rate, the catalyst prepared with SBA-15 of 8.1 nm pore size had the fastest reaction rate and showed the best catalytic activity.