• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.751-762
• /
• 2004

In this paper, we propose the method to derive new GRM(Generalized Reed-Muller) coefficients for each 2$^n$ polarities using Triangle cell. As the existing methods to generate GRM coefficients, there are Green's method to operate transform matrix with a given RM coefficient and Besslich's method to get other polarities using basic transfer matrices repeatedly. In this paper, Triangle cell is defined so as to obtain GRM coefficients efficiently. After arranging 2$^n$ given RM coefficients of a first row of Triangle cell, sequence modulo sum is peformed in parallel to low column by a fixed numerical formula. To prove the efficiency of proposed arithmetic method, it is compared with Besslich’s method. As the compared result, to calculate GRM coefficients of all polarities to n input variables, Besslich’s method needs 2$^n$$^{-1}$ ${\times}$(2$^n$-1) two-input Ex-ORs and the proposed method needs 2${\times}$(the number of Ex-ORs for n-1 variables)+3$^n$$^{-1}$ for the same system complexity - (lo $g_2$$^n$) $T_{X}$./.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.5
• /
• pp.29-36
• /
• 2004

This study focuses on the arithmetical methodology and hardware implementation of low-system-complexity multiplier over GF(2$^{m}$ ) using the trinomial of degree a The proposed parallel-in parallel-out operator is composed of MR, PP, and MS modules, each can be established using the regular array structure of AND and XOR gates. The proposed multiplier is composed of $m^2$ 2-input AND gates and $m^2$-1 2-input XOR gates, and the propagation delay is $T_{A}$+(1+[lo $g_2$$^{m}$ ]) $T_{x}$ . Comparison result of the related multipliers of GF(2$^{m}$ ) are shown by table, it reveals that our operator involve more regular and generalized then the others, and therefore well-suited for VLSI implementation. Moreover, our multiplier is more suitable for any other GF(2$^{m}$ ) operational applications.s.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.216-220
• /
• 1996

In the present paper, a new type of DC arc plasma torch is disclosed. The principles of the new magnetic and fluid dynamic controlled large orifice long discharge tunnel plasma torch is discussed. Two series of DC Plasma Jet diamond film deposition equipment have been developed. The 20kW Jet equipped with a $\Phi$70 mm orifice torch is capable of deposition diamond films at a growth rate as high as 40$\mu\textrm{m}$/h over a substrate area of $\Phi$65 mm. The 100kW high power Jet which is newly developed based on the experience of the low power model is equipped with a $\Phi$120 mm orifice torch, and is capable of depositing diamond films over a substrate area of $\Phi$110 mm at growth rate as high as 40 $\mu\textrm{m}$/h, and can be operated at gas recycling mode, which allows 95% of the gases be recycled. It is demonstrated that the new type DC plasma torch can be easily scaled up to even higher power Jet. It is estimated that even by the 100kW Jet, the cost for tool grade diamond films can be as low as less than ＄4/carat.

• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.6-10
• /
• 1993

11 β ,17 β -dihydroxy-9a-fluoro-l7a-methyl androst-4-en-3-one (Fluoxymesterone), CgoH29 FO,, orthorhombic, P2,2,2,, a=13.468(5) A, b= 19.554 (2)A, c=6.578(9)A, a=b=r=90˚, A (CuKa)=1.5406 A , Dm=1.289cm-3, Dc=1.299cm-3 and Z=4 at T=298k. The structure was solved by direct method using seminvariants of ggg Parity group and refined by the full-matrix least-square method, resulting model with reliability factor R=0.069 for 1098 unique reflection over 3σ . Ring A is an 1β-2a-half chair, 5 ring has a highly symmetrical chair conformation, C ring is in a distorted chair conformation and D ring is a 13aenveLope conformation. In the crystal structure, the molecules are packed with a hydrogen bond of 011-H23‥‥03(0.5+x, 1.5-y, 1.0-z) [1.94(9) A of H‥‥0.2.786(9)A of 0‥‥0 and 165(8) ˚ of

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.6
• /
• pp.24-30
• /
• 2003

This study focuses on the arithmetical methodology and hardware implementation of low system-complexity A $B^2$＋C operator over GF(2$^{m}$ ) using the irreducible AOP of degree m. The proposed parallel-in parallel-out operator is composed of CS, PP, and MS modules, each can be established using the array structure of AND and XOR gates. The proposed multiplier is composed of (m＋1)$^2$ 2-input AND gates and (m＋1)(m＋2) 2-input XOR gates. And the minimum propagation delay is $T_{A}$ ＋(1＋$\ulcorner$lo $g_2$$^{m}$ $\lrcorner$) $T_{x}$ . Comparison result of the related A $B^2$＋C operators of GF(2$^{m}$ ) are shown by table, It reveals that our operator involve more lower circuit complexity and shorter propagation delay then the others. Moreover, the interconnections of the out operators is very simple, regular, and therefore well-suited for VLSI implementation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.371-379
• /
• 2011

Active phased array antenna structure is used for modern multi-function radars. To search targets in high clutter environment, the radar receiver needs high dynamic range performance. Though active phased array antenna structure lead to increase of SNR, the SFDR is not increased. In this paper, high SFDR receiver of X-band active phased array radar was designed and manufactured. One channel digital receiver is connected to 32 T/R modules and one PCB assembly is composed to 2 channel digital receivers with RF part, ADC part, LO distribution part and digital down conversion part. A commercial FIFO board was used for digital receiver measurement about major performance in digital output signal condition. The measured digital receiver gain and SFDR is 33 dB and more than 81 dBc each.

• Korean Journal of Ecology and Environment
• /
• v.50 no.4
• /
• pp.441-451
• /
• 2017

The present study was conducted from August to December 2016 in a cylindrical water tank with a diameter of 1 m, a height of 4 m and a capacity of 3,000 L. The field water and sediment from the Nakdong River were also sampled for the experimental culture (field water+sediment) and control culture (field water), respectively. In this study, we aimed to investigate phytoplankton succession pattern using the phytoplankton functional group in the enclosed culture system. A total of 50 species in 27 genera including Chlorophyceae (30 species), Bacillariophyceae (11 species), Cyanophyceae (7 species), and Cryptophyceae (2 species) were identified in the experimental and control culture systems. A total of 19 phytoplankton functional groups (PFGs) were identified, and these groups include B, C, D, F, G, H1, J, K, Lo, M, MP, N, P, S1, $T_B$, $W_0$, X1, X2 and Y. In particular, $W_0$, J and M groups exhibited the marked succession in the experimental culture system with higher biovolumes compared to those of the control culture system, which may be related to the internal cycling of nutrients by sediment in the experimental culture system. The principal component analyses demonstrated that succession patterns in PFG were associated with the main environmental factors such as nutrients(N, P), water temperature and light intensity in two culture systems. In conclusion, the present study showed the potential applicability of the functional group for understanding the adaptation strategies and ecological traits of the phytoplankton succession in the water bodies of Korea.

• Journal of the Microelectronics and Packaging Society
• /
• v.4 no.1
• /
• pp.1-12
• /
• 1997

본 연구에서는 용액성장법에 의해 양자 입자로 구성된 CdS 박막을 슬라이드 유리기 판위에 성장시키고 이들의 구조적 광학적 특성에 대하여 연구하였고 이들 결과를 토대로 용 액성장법으로 성장된 CdS 박막의 양자 사이즈 효과에 대하여 연구하였다. 성장시간은 1, 3, 10, 20분이었고 성장온도는 75$^{\circ}C$였다. X-선 회절 분석결과 본 연구에서 합성된 CdS 박막은 hexagonal상의 결정구조를 갖는 것으로 나타났고 성장시간에 따라 막의 투께는 61~195nm, 입자사이즈는 8.5~22.5nm로 나타났다. 광에너지 변화에 따른 투과도 측정결과 본 연구의 CdS 시료는 성장시간에 따라 에너지 밴드갭이 2.43~2.51 eV로 나타나서 벌크 CdS의 에너 지 밴드갭인 2.42 ev보다 높은 에너지 밴드갭을 갖게 되어 양자 사이즈 효과에 의한 blue shift 현상이 용액성장법에 의해 합성된 CdS 시료에도 존재한다는 것이 밝혀졌다 그리고 이 같은 용액성장법으로 성장된 CdS에 대해 최초로 수행된 Raman 산란 실험결과 이성장방법 으로 성장된 CdS에는 1TO, E2, 1LO 포논 모드가 존재함을 알수 있었고 또한 입자 사이즈 감소에 의한 1LO포논 모드의저주파수 shift 현상 즉 포논 모드의 softening 현상이 있음이 밝혀졌고 softening은 최대6.2%까지 발생하였다. 이와같은 높은 softening은 본연구의 CdS 박막 내 양자 입자의 입도가 작은것에 기인하는 것으로 밝혀졌다. 또한 본 CdS 시료의 양 자 사이즈 효과의 결과로 1TO 포논도 나타났는데 이 1TO 포논과 E2 포논의 Raman shift 는 성장시간 즉 막의 두께와는 무관한 것으로 나타났다.행렬모형(二重比例行列模型)을 이용하여, 산업구조의 변화로 인한 직업별 인력수요 변화가 충분히 고려되도록 하였다. 전망의 결과에 따르면 향후 우리 경제는 지식기반경제(knowledge-based economy)로 이행하고 있다고 볼 수 있다. 우선 산업구조면에서 지식집약적산업으로의 구조조정이 일어나게 되고 이에 따라 산업별 취업구조에서도 고기술산업의 취업준비중이 급속히 증가하게 된다. 직업별 취업분포에 있어서도 전문기술직 행정관리직 등의 고숙련 사무직의 비중은 크게 증가하는 반면 생산관련직과 농림어업직의 비중은 감소하게 된다. 이처럼 경제가 지식집약화되어 감에 따라 고학력자에 대한 수요는 지속적으로 증가하지만 현재 적절한 인력양성과 공급이 이루어지지 않고 있어 향후 기술이나 기능에 따른 수급부일정(需給不一政)(skill mismatch)현상이 매우 심해질 것으로 보인다. 따라서 앞으로의 인력정책에서 가장 주안점을 두어야 할 부분은 첨단기술산업과 관련된 인력의 양성에 있다고 하겠다.2시간까지 LPDG용액은 MEC용액보다 비교적 나은 회복을 보였고 재관류 3일과 7일의 폐기능 평가에서 두 용액 모두에서 폐기능의 점차적 소실을 보였으며 이는 병리조직검사에서 보듯이 폐혐에 의한 외적인 요소라고 생각되며 따라서 LPDG용액은 허혈재관류손상 방지 및 급성폐렴 등 염증을 잘 관리한다면 20시간 이상 LPDG용액의 안전한 폐보존의 가능성 을 얻을 수 있었다.ic 형태로 외래유전자가 발현되었지만 대조구에서 87.0% (26/30개) 배반포기가 $\beta$-Gal 활력을 보인 반면, G418 처리구에서는 모든 배반포기가 $\beta$-Gal 활력을 보였다 (P<0.05). 그러나 대조구 및 G418 처리구의 ICM

• Progress in Medical Physics
• /
• v.17 no.4
• /
• pp.207-211
• /
• 2006

The advent of kV cone-beam computed tomography (CBCT) integrated with a linear accelerator allows for more accurate Image-guided radiotherapy (IGRT). IGRT is the technique that corrects target displacement based on internal body information. To do this, the CBCT Image set is acquired just before the beam is delivered and registered with the simulation CT Image set. In this study, we compare the registration results according to the CBCT's reconstruction quality (either high or medium). A total of 56 CBCT projection data from 6 patients were analyzed. The translation vector differences were within 1 mm in all but 3 cases. For rotation displacement difference, components of all three axes were considered and 3 out of 168 ($56{\times}3$ axes) cases showed more than lo of rotation differences.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.3
• /
• pp.179-183
• /
• 1998

The cyanidin 3-glucoside (C3G) extracted from pigmented rice seeds in 0.5% TFA (Trifluoro acetic acid) -95% ethanol was separated by High Performance Liquid Chromatography (HPLC). A HPLC system using a Develosil ODS-5 column and 0.1 % TFA-$H_2O$～0.1 % TFA-$CH_3CN$ gradient elution was selected for separation and quantitative determination of C3G. Regression equation obtained for the standard content of C3G pigment was as Y=21.95293$^*$X-14.726771 (r=0.99$^{**}$). Using this method, 326 domestic and introduced collections were evaluated for the C3G content. The Korean bred cultivar 'Heugjinjubyeo', showed highest C3G content (552 mg/100g seed) among the tested cultivars. Among the pigmented rice cultivars ten cultivars were selected for containing a high content of C3G. The content of C3G per 100g seeds was in high order as follows: Heugjinjubyeo (552mg)>Cheng Chang (321mg)>Kilimgeugmi (240mg)>PI160979-2 (224mg)>Hong Shei Lo (221mg)>Heugnambyeo (191 mg)>Mitak =PIl60979-1 (186mg)>Suwon425 (163mg)>Sanghaehyanghyeolla (108mg). The C3G pigment was not detected in the common white rice cultivars.