• Journal of the Korean Chemical Society
• /
• v.36 no.2
• /
• pp.205-211
• /
• 1992

The $2{\nu}_{C=0}$ + amide III combination band spectrum of acetamide (AA) was obtained in very dilute solutions of AA+lanthanide shift reagents (LSR) in carbon tetrachloride over the range of $15^{\circ}$ to $45^{\circ}C$. It was found that only 1 : 1 AA-LSR complex is formed by the interaction between carbonyl oxygen of AA and central metal ion(Ln(Ⅲ)) in LSR. The thermodynamic parameters for Ln(III)${\cdot}$O=C bond were determined by computer analysis of concentration and temperature dependent spectra. ${\Delta}H^{\circ}$ for the coordination of AA to Eu$(dpm)_3$, Yb$(dpm)_3$, and Pr$(dpm)_3$ have been found to be -39.1, -28.4, and -25.5 kJ/mol, respectively. It has shown that this type of ion-dipole interaction is more than twice stronger compared to the dipole-dipole interaction in the amide linkage, and largely depending on the steric hindrence effect by the bulky dpm groups around central metal ion (Ln(III)) rather than the ionic potential effect of central metal ion itself.

• Journal of the Korean Magnetics Society
• /
• v.11 no.4
• /
• pp.151-156
• /
• 2001

Recently many studies on manganese oxides Ln$_{1-x}$A$_{x}$MnO$_3$(Ln=La, Pr, Nd lanthannide; A=Ca, Sr, Ba, Pb +2 ions) reported CMR properties. CMR have been also found in chalcogenide spinels. We have investigated that Ni ion substitutions for Fe ion have effects on CMR properties in chacogenide spinels Ni$_{x}$Fe$_{1-x}$Cr$_2$S$_4$. It was found that with increasing Ni concentration Jahn-Teller distortion was strengthened and Curie temperature T$_{c}$ was increased. CMR properties could be explained with Jahnl-Teller effect, half-metallic electronic structure, and the alignment of magnetic domain due to the strong magnetic field, which is different in that double exchange interactions dominate CMR properties in manganese oxides.

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.818-823
• /
• 1992

2-Ethylhexanoate compounds which contained Y, Er, Yb, Ba, and Cu were prepared separately. These metallo-organic compounds were dissolved together in the common solvent and the solution was homogeneous. From these solution, high $T_c$ superconductors $YBa_2Cu_3O_{7-\delta}(Y_{123})$, $ErBa_2Cu_3O_{7-\delta}(Er_{123})$, and $YbBa_2Cu_3O_{7-\delta}(Yb_{123})$ were prepared. XRD analysis showed that these superconductors were not single phase and contained some impurity phases including $YBa_2Cu_4O_8(Y_{124})$. This was also confirmed from the magnetic susceptibility measurement. Generally, critical temperatures were higher than that of the superconductors prepared by ceramic method. Volume diamagnetic susceptibility showed little variation compared to the specimen made by ceramic method.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.1-1
• /
• 2000

The infinite layer compound $ACuO_2$, (A-Alkaline earth) consists of infinite stacking of $CuO_2$ planes separated only by alkaline earth ions. This compound attracted much attention because it contains only key ingredient of all cuprate high temperature superconductor; $CuO_2$ plane with controllable carrier concentration without charge reservoir block. High pressure synthesis method has been found to be preferable for this system due to its ability of doping various lanthanide ion into A site with larger superconducting volume fraction. But rigorous study on this rudimentary compound has been hindered by insufficient quality of sample. Especially superconductlng volume fraction was often too small to identify its origin. In this presentation, we report high pressure synthesis of $Sr_{0.9}Ln_{0.1}CuO_2$ (Ln=La, Sm). By controlling the heating temperature precisely during high pressure synthesis we could have superconductors with quite high superconducting volume fraction for this compound. The magnetic properties of the graln aligned samples show very different behavior compared to the cuprate high temperature superconductors. Details will be discussed.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1679-1683
• /
• 2013

Intergrowth perovskite type complex oxides $La_{0.8}Ln_{0.2}Sr_2MnCrO_{7-{\delta}}$ (Ln=La, Nd, Gd, and Dy) have been synthesized by sol-gel method. Rietveld profile analysis shows that the phases crystallize with tetragonal unit cell in the space group I4/mmm. The unit cell parameters a and c decrease with decreasing effective ionic radius of the lanthanide ion. The magnetic studies suggest that the ferromagnetic interactions are dominant due to $Mn^{3+}$-O-$Mn^{4+}$ and $Mn^{3+}$-O-$Cr^{3+}$ double exchange interactions. Both Weiss constant (${\theta}$) and Curie temperature ($T_C$) increase with decreasing ionic radius of lanthanide ion. It was found that the transport mechanism is dominated by Mott's variable range hopping (VRH) model with an increase of Mott localization energy.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.4
• /
• pp.184-190
• /
• 2022

Spinel LiMn₂O₄ (LMO) and layered LiNi_0.5Co_0.2Mn_0.3O₂ (NCM) are widely used as positive electrode materials for lithium-ion batteries. LMO and NCM positive electrode materials have a complementary properties. LMO has low cost and high safety and NCM materials show a relatively high specific capacity and better cycle life even at elevated temperature. Therefore, the LMO and NCM active materials are blended and used as a positive electrode in large-size batteries for electric vehicles (xEV). In this study, the cycle performance of a blended electrode prepared by simply mixing LMO and NCM and a bi-layer electrode in which two electrode layers aree sequentially coated are compared. The bi-layer electrode prepared by composing the same ratio of both active materials has similar capacity and cycle performance to the blend electrode. However, the LN electrode coated with LMO first and then NCM is the best in the full cell cycle performance at elevated temperature, and the NL electrode, in which NCM is first coated with LMO has a faster capacity degradation than the blended electrode because LMO is mainly located on the top of the electrode adjacent to electrolyte and graphite negative electrode. Also, the LSTA (linear sweep thermmametry) analysis results show that the LN bi-layer electrode in which the LMO is located inside the electrode has good thermal stability.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.104-107
• /
• 1999

We investigated the effects of cooling condition on deep levels and iron precipitate formation in iron-contaminated p-type silicon by DLTS(Deep Level Transient Spectroscopy) and preferential etching technique. Dependency of cooling condition on Bulk Micro-Defect (BMD) and four different iron-related deep traps were observed. For normal cooling condition, T1, T2, T3, T4 traps that related to Fe\ulcorner or Fe-O complex were obtained. However, the trap with activation energy, 0.4 eV was observed for slow cooling condition. The trap caused by the $\textrm{Fe}^{+}\textrm{}^{-}$ pair (H4:0.56eV) were detected only at the case of $\textrm{LN}_{2}$ quenching condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.10-13
• /
• 1993

ln this study, x PSN - y PT - z PZ ceramics doped with w MnO$_2$were fabricated by the mixed oxide method at 1250[$^{\circ}C$] for 2[hr] and then the dielectric and pyroelectric properties were investigated. In the 0.05 PSN - 0.4 PT - 0.55 PZ specimen with 0.5[wt.%] MnO$_2$, the pyroelectric coefficient was 6.6${\times}$10$\^$-8/[C/cm$^2$$.$$^{\circ}C$], respectibly.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.287-294
• /
• 2007

[ $K\ddot{o}ln$ ] IMM (International Mobel Messe Koln) is traditionally one of the advanced Exhibitions with International Expo of Furniture in Milan. IMM is not only the furniture exhibition but also well known international event that shows novel idea and the newest trend of interior design field. This event displays from the traditional style reaches to the newest trend, and also presents the world various Interior design spectrum with the forecast of interior design industry. This study analyze out the trend of the nm in year 2004, 2005 and 2006. It analyzed each year's design with form, material, color and general feature. Thus, it suggests demanding and persistent design of modern society, This chart shows the characteristics of the furniture design from 2004 to 2006 Result of the study shows that the trend of the furniture design would be process with the relationship of simple design, multi-cultural character, and practical paradigm.

• Journal of the Korean Chemical Society
• /
• v.63 no.4
• /
• pp.246-252
• /
• 2019

In the system of GC-OTC/FID (Gas chromatography-Open Tubular Column/Flame Ionization Detector), DMSO (Dimethyl sulfide) solvent was used to separate the polar solvents (Alcohols). In this system DMSO was eluted later than the separated polar solvents. At this system to calculate chromatographic factors [adjusted retention time ($t_R^{\prime}=t_R-t_O$), capacity factor{$k^{\prime}=(t_R-t_O)/t_O$} and separation factor {${\alpha}=(t_{R2}-t_O)/(t_{R1}-t_O)$}], dead time($t_O$) is necessary, but the method to calculate it has not been reported yet. Therefore, we have tried to develop $t_O$. To calculate $t_O$, we conversed DMSO retention time (DMSO $t_R$) to logarithm ($f(x)={\log}\;t_{R(DMSO)}{\rightarrow}t_O$, $t_O={\log}$ 9.551=0.980). To confirm the optimization of the developed method, we compared with $CH_4\;t_R$ and ${\ln}\;t_{R(DMSO)}$. Both of the values calculated by $CH_4\;t_R$ and ${\ln}\;t_{R(DMSO)}$ were not suitable in the calculation k' and ${\alpha}$. The developed method in this study{${\log}\;t_{R(DMSO)}$} has satisfied both of the values k' criteria (1${\alpha}(1<{\alpha}<2)$. The developed calculation method in this study was easy and convenient, therefore it can be expected to be applied to these similar systems.