• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.318-326
• /
• 2013

The effect of finger joint location and distance from joint to joint one another on 3 point mid-concentration bending strength properties was investigated in this experiment. Resorcinol-phenol formaldehyde (RPF) and aqueous vinyl urethane (AVU) was used to domestic Pinus densiflora Sieb. et Zucc and imported Picea sitchensis Carr. that have been cut to different width of 0.15 mm between finger tip and root width and the distance from loading point to finger joint was 0, 30, 40, 50, 60 mm. The effect was not found on the location and distance of finger joint for bending modulus of elasticity, while the efficiency of bending strength property increased proportionally as the location of finger joint from the load point and the distance between finger joint increased. No influence was shown by finger joint location and distance beyond 3 times of specimen thickness, since similar values were shown between the solid wood and no destruction occurred materials.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.74-82
• /
• 1987

This study has been made to investigate into the behavior of fatigue limit, of fatigue crack initiation, and of fatigue crack propagation under the condition of rotating bending stress; specifically on the independency of stress field as well as the crack behavior of surface micro hole defect, which is made artificially through the specimen. The results obtained can be summarized as followa; 1) For the single micro hole defect, initiation of fatigue crack is occurred at both tips of microhole defect simultaneosly along the slip which are produced in the range of maximum principal stress arround micro hole defect independent of the size of micro hole defect. 2) For the neighbored deuble micro hole defects with equal size, in the range ($\frac{L}{r}$)ratio $\gtrsim$ 3 defined as the size of micro hole defect(2r) to the distance between the centers of micro hole defects (2L), the crack behavior of the micro hole defects is same as single one. However, for the range of $\frac{L}{r}$<3, the interference effect becomes significant as the ratio approaches to 1.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.225-225
• /
• 2016

PHOLED devices which have the structure of ITO/HAT-CN(5nm)/NPB(50nm)/EML(47nm)/TPBi(10nm)/Alq3(20nm)/LiF(0.8nm)/Al(100nm) are fabricated to investigate the diffusion length of the triplet exciton by using double-quantum-well(DQE) EML structure. To fabricate DQW structures, Ir(ppy)3(2% wt) and Ir(btp)2(8% wt) are used as green and red emission zones, respectively. In DQW structured EML, as shown in Fig. 1, 1nm thick layers of green and red emission zones are located middle of the EML, and the distance between these wells(x) is changed from 0nm to 10nm. As shown in Fig. 2, the emission spectra from DQW PHOLED devices are changed with different x. The intensity of the green emission(520nm) is decreased when x is decreased, and it goes to near zero when x=0nm. This behavior can be identified as the diffusion of the triplet excitons from Ir(ppy)3 to Ir(btp)2 by the Dexter energy transfer(DET). From the external quantum efficiency(EQE) of the red emission, as shown in Fig. 3, the diffusion length of the triplet excitons can be determined by the equation of DET rate, R=A Exp(-2RDA/L), where RDA is donor-acceptor distance and L is the sum of the van der Wals radii. As a result, the measured data of the red EQEs with different x are identified to theoretical result from the equation of DET rate(Fig. 4). From this results, we could confirm that the diffusion length of the triplet excitons can be determined by using DQW structure and this method is very useful to investigate the behavior of the excitons in PHOLEDs.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.80-88
• /
• 1996

The aim of the present investigation was to see the effect of combined use of PDGF BB and IGF -1 on the guided tissue regeneration(GTR) using barrier membrane in the treatment of human furcation involvement. Twelve patients with initially diagnosed as having moderate to advanced adult periodontitis with mandibular class II buccal furcation defects have been wer selected. Initial scaling and root planing has been performed and baseline data consisting of probing depths and attachment levels have been recorded prior to surgical procedures. The GTR procedures using either barrier membrane(control : ePTFE) alone or together with the application of PDGF - BB and IGF -l(experimental : ePTFE+PDGF/IGF) have been done under the routine guidelines. During the surgery, the distance from CEJ either to the bottom of the bone defects(CEJ - BD) or to the bone crest(CEJ-BC) were measured. Horizontal distance to the deepest area in the furcal defects were measured from the reference line connection the most prominent bony walls of the two buccal roots. 6 months following the GTR therapy, all the measurements were made repeatedly. The probing attachment gain of the experimental and the control grous were 2.14mm and l.07mm, respectively with no statically significnant difference. Amont of vertical bone fill in the experimental and the control groups were 2.43mm and 2.29mm, rexpectively. Amonut of horizontal bone fill were 2.86mm in the experimental group and 2.17mm in the control group, respectively. However, there were no significant differences in the amount of bone fill(both vertical and horizontal)between the two groups.

• Geomechanics and Engineering
• /
• v.19 no.5
• /
• pp.407-420
• /
• 2019

This paper illustrates the results of a series of seismic geotechnical centrifuge experiments to explore dynamic structure-soil-structure interaction (SSSI) of two structures (named S1 and S2) installed on ground surface. A dense homogeneous ground is prepared in an equivalent shear beam (ESB) container. Two structural models are designed to elicit soil-foundation-structure interaction (SFSI) with different masses, heights, and dynamic characteristics. Five experimental tests are carried out for: (1) two reference responses of the two structures and (2) the response of two structures closely located at three ranges of distance. It is found that differential settlements of both structures increase and the smaller structure (S2) inversely rotates out of the other (S1) when they interact with each other. S2 structure experiences less settlement and uplift when at a close distance to the S1 structure. Furthermore, the S1 structure, which is larger one, shows a larger rocking and a smaller sliding response due to the SSSI effects, while S2 structure tends to slide more than that in the reference test, which is illustrated by an increase in sliding response and rocking stiffness as well as a decrease in moment-to-shear ratio (M/H·L) of the S2 structure.

• Korean journal of food and cookery science
• /
• v.17 no.1
• /
• pp.60-64
• /
• 2001

Chemical compositions and texture of Allium senescens that is one of Korean indigenous culinary herbs were analyzed. The contents of carbohydrate and calorie were higher than those of Chinese chive. Proline, glutamine, valine, leucine and threonine were the major total amino acids in white and green portions of Allium senescens leaves. Methionine and cysteine were identified in white and green portions of Allium senescens leaves. The values of sodium and iron in Allium senescens were lower than in Chinese chive. Trace amount of selenium was also detected in Allium senescens leaves. The C$_{20:5}$ and C$_{20:6}$ were identified in leaves of Allium senescens. As a result of Rheometer analysis and sensory evaluation, texture of Allium senescens was more tender than that of green portion of Chinese chive leaves.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.66-73
• /
• 2004

Three species of Italian poplar (Populus euramericana), red pine (Pinus densiflora) and oriental oak (Quercus variabilis) were selected for this study. They were cut so that the distances between each of tips and roots for a pair of fingers were 0, 0.15, 0.30 and 0.45 mm. Poly vinyl acetate (PVAc) and resorcinol-phenol resin (RPR) were used for finger-jointing. Compressive test parallel to the grain was conducted for the finger-jointed specimens. The results were as follows: The efficiency of compressive Young's modulus of finger-jointed timber to solid wood indicated low values, whereas the efficiency of compressive strength indicated high values of more than 90% in all species, especially, it was found that those of red pine indicated markedly high values of more than 97%. The efficiency of compressive displacement of Italian poplar finger-jointed timber was 2 times higher than solid wood, and it was 1.2 and 1.3 times higher than solid woods in red pine and oriental oak, respectively. Also, it was found that 0, the distance between each tip and root for the fingers, indicated the highest efficiency of compressive strength performance in Italian poplar finger-jointed timber, and for red pine and oriental oak finger-jointed timbers, the distances of 0.15 and 0.30 were found to indicate the highest efficiency.

• Journal of Biosystems Engineering
• /
• v.26 no.2
• /
• pp.169-176
• /
• 2001

Defect of apple was depreciated the product value and causes storage disease seriously. To detect the defect of ‘Fuji’apple with machine vision system, the optical characteristics of defect should be investigated. In this research, absorbance spectra of defect were acquired by spectrophotometer in the range of visible and NIR region(400∼1,100nm) and L*a*b* color values were also acquired by colorimeter. NIR machine vision system was constructed with B&W camera, frame grabber, 16 tungsten-halogen lamps, variable focal length lens and NIR bandpass filter which was mounted to lens outward. Average gray values of defect at 15 NIR wavelength were acquired and the significant NIR wavelength was selected by comparing Mahalanobis distance between sound and defective apple. As the result of Mahalanobis distance analysis, the significant wavelength to discriminate the defectives in ‘Fuji’apple were found to be 720nm for scab and 970nm for bruise and cuts and 920nm was also effective regardless of defective types.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1782-1784
• /
• 2000

This paper present the result of the investigation, the distribution of salt contamination with the influence of. geographical condition. To get the ESDD data, a conventional brush washing method was adapted, and IC(ion chromatography) was used to measure the quantity of anions, such as $Cl^-$ and ${SO_{4}}^{2-}$. And we make an analysis on the distribution of salt contamination with the increase of distance from shore. With 10 month ESDD data, we seek the 95% ESDD value with interpolation method. With these analyses, we had obtained the formulation concerned with the distance from sea. And could know the composition of contamination.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.5
• /
• pp.410-417
• /
• 2006

The present study predicted the effect of the flow rate of coolant on the absorption performance of a vertical falling film type absorber Heat and mass transfer peformances were numerically investigated. The exit temperatures of solution and coolant were decreased as the flow rate of the coolant was increased at the film Reynolds number of 100. The absorption mass flux was increased and then decreased as the distance from the inlet of the absorber was increased. The distance showing the maximum absorption mass flux was ranged from 0.3 to 0.5m. The heat flux and the absorption mass flux were increased and then slowly decreased as the flow rate of the coolant was increased. The maximum values were obtained at the flow rate of coolant of 2.0L/min.