• The Korean Journal of Applied Statistics
• /
• v.19 no.1
• /
• pp.183-193
• /
• 2006

We consider a new classification method(DnDclass) combining two classification rules based on $L_1$-distance(L1DISTclass) and $L_1$-data depth(L1DDclass). To investigate characteristics and to evaluate the performance of these classification methods, we use simulation data in various settings. Through this simulation study, we can confirm that the new method, DnDclass, performs relatively well in many cases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.847-851
• /
• 2016

Due to global warming it is estimated that the arctic ocean route will be avaliable and traffic will increase by approximately year 2030. However, most navigation in the arctic is based on the ice breaker captains'orders, there is no exact measurement of convoy speed and distance between ships. So, this research was conducted to find out the minimum safe separation distance and minimum breaking distance via ship controling simulations, and the results are as stated. For breaking distances, for ships that have a lead distance which is 2~4 times the width of the ship and traveling less than 7 knots, crash astern and crash astern & hard rudder showed no significant difference. But ships traveling at 10 knots there was a decrease in breaking distance of 1L, from 3.5L to 2.5L. By analyzing 10 subject ships by crash astern the breaking distance for 5 knots is 0.98L~1.8L, for 8 knots is 1.9L~4.0L. The minimum safe separation distance in narrow sea-ways is 6L, but as the arctic sea-way is only one-way 3L is required. As the result, it is found that in the arctic the safe escort speed is less than 5 knots, if the escort speed is 8knots or more and by using crash astern & hard rudder to break the safe distance should be kept at 3.4L.

• Annals of Clinical Neurophysiology
• /
• v.19 no.1
• /
• pp.28-33
• /
• 2017

Background: Previous studies of radial nerve conduction study (NCS) did not present how to measure the length of the radial nerve across the elbow, and did not even mention how to manage the spiral course of the nerve. This study aimed to applicate the most reliable method to measure the length of the radial nerve during NCS. Methods: Three points (A, B, and C) were determined along the relatively straight course of the radial nerve. The distance was measured using three different methods: L1) straight distance corresponding to the A-C distance, L2) sum of the distances corresponding to the A-B-C distance, L3) based on the L2, but the elbow is flexed at a $45^{\circ}$ angle. We compared the three methods of distance measurement and the calculated nerve conduction velocities (V1, V2, and V3) in normal healthy subjects. Results: 19 normal participants were enrolled. The mean value for method L1, L2 and L3 were $22.5{\pm}1.8cm$, $24.0{\pm}2.1cm$, and $23.2{\pm}2.1cm$ (p < 0.001). Calculated conduction velocities using those distance measurement methods as follows (p < 0.001): V1 ($60.9{\pm}2.7m/s$), V2 ($64.6{\pm}3.3m/s$), and V3 ($63.4{\pm}3.9m/s$). V2 was significantly greater than V1 and V3 (p < 0.001, p = 0.010, respectively). Conclusions: The distance measurement using a stopover point near the lateral epicondyle between two stimulus points in position of a fully extended elbow with forearm pronation is the most appropriate posture for radial motor NCS.

• Journal of information and communication convergence engineering
• /
• v.10 no.1
• /
• pp.1-4
• /
• 2012

Given separated points divided by a line, called a wall, in a plane, we aim to make a gate in the wall to connect the separated points to each other. In this setting, the problem is to find a location for the gate that minimizes the average distance between the points. The problem is a variant of the well-known facility location problem, which is extensively studied in the fields of operations research, location theory, theoretical computer science, and so on. In this paper, we consider the $L^1$-distance of the points in the plane. The points are projected onto the wall and so the problem is transformed to a proximity problem of points on a line. Then it is shown that the transformed problem is related to the weighted median problem of points on the line. Therefore, we obtain an O(n log n)-time algorithm to solve our problem.

• Journal of Chest Surgery
• /
• v.19 no.4
• /
• pp.750-759
• /
• 1986

Spontaneous pneumothorax is usually seen in young adult male. And typically, the patient is a tall, thin, 20- to 30-year-old male. Usually the pneumothorax results from rupture of a pulmonary bleb. Author reviewed 66 cases of spontaneous pneumothorax experienced in the Dept. of Thoracic & Cardiovascular Surgery, Pusan National University Hospital, since Jan., 1980 to Aug., 1986. The clinical data were summarized as follows: 1. The age distribution of spontaneous pneumothorax: 17 to 34 years old and mean age was 25.3 years. 2. The sex distribution of spontaneous pneumothorax: 52 in men, 14 in women and the ratio was 3.7:1. 3. Chest dimension in male patients: Maximum posteroanterior distance [MPA], MPA/Maximum width [MW]: Significantly smaller than control group. Distance from second to tenth rib on left [L2-10], Distance from second rib on right to diaphragm [R2-D], R2-D/MW: Significantly larger than control group. 4. Chest dimension in female patients: MPA, MW: Significantly smaller than control group. Distance from second rib on left to diaphragm [L2-D], Distance from second to tenth rib on right [R2-10], R2-D, L2-10/MW, L2-D/MW, R2-10/MW, R2-D/MW: Significantly larger than control group.

• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.185-192
• /
• 2002

The performance of old and the new concrete construction depends upon bond strength between old and the new concrete. Current adhesive and strength measurement method ignores the effect of stress concentration from shape of specimens. Therefore, this research calculates stress concentration coefficient as the ratio of drilling depth to drilling diameter($h_s/D$), the ratio of overlay thickness to drilling diameter($h_0/D$), the ratio of steel disk thickness to drilling diameter(t/D), the ratio of overlay elastic modulus to substrate modulus($E_1/E_0$), the distance from core to corner border(L_$_{corner}$) and the distance between cores(L_$_{coic}$) vary. The finite element method is adapted to analysis The results from 'the F.E.M analysis are as follows. The stress concentration effects can be minimized when the ratio of drilling depth to drilling diameter($h_s/D$) is 0.20~0.25, the elastic modulus ratio($E_1/E_0$) is 06~1.0, and the ratio of steel disk thickness to drilling diameter(t/D) is 3.0. The overlay thickness, the distance from specimens to corner border(L_$_{corner}$), the distance between cores(L_$_{coic}$) almost do not affect to the stress concentration.

• Animal Systematics, Evolution and Diversity
• /
• v.7 no.1
• /
• pp.65-72
• /
• 1991

The interspecific relationships of the genus Leucophenga, L.concilia, L.maculata, L.orientalis , and L.quinquenmaculipennis were investigated by soluble proteins analysis. the electrophoretic banding patterns of the four species analyzed by SDS-PAGE were scanned by densitormeter. The soluble protein patters of L.maculata and L.concilia by SDS-PAGE appeared similarly and on the other hand, those of L.quinquemaculipennis had a different forms from three other species. The genetic distance among the four species of TDE analysis was calculated by formula of the Aquadro and Avis(1981) . The genetic distance between L.maculata and L.concilia was 0.393 , the lowest of all and between L.maculata and L.quinquemaculipennis was 0.496, the highest of all. The dendrogram was established using UPGMA method based on genetic distance obtained by TDE analysis. Clustered patterns as follows ; first, L.maculata and L.concilia were clustered, and L.orientalis and L. quinquemaculipennis followed the firstone in order. In consequence, it seems that the interspecific relationship of L.quinquemaculipennis was farther from the other three species, while that of L.maculata and L.concilia was closer than that of L.orientalis.

• Communications for Statistical Applications and Methods
• /
• v.16 no.6
• /
• pp.989-995
• /
• 2009

Basu et al. (1998) proposed the minimum divergence estimating method which is free from using the painful kernel density estimator. Their proposed class of density power divergences is indexed by a single parameter $\alpha$ which controls the trade-off between robustness and efficiency. In this article, (1) we introduce a new large class the minimum squared distance which includes from the minimum Hellinger distance to the minimum $L_2$ distance. We also show that under certain conditions both the minimum density power divergence estimator(MDPDE) and the minimum squared distance estimator(MSDE) are asymptotically equivalent and (2) in finite samples the MDPDE performs better than the MSDE in general but there are some cases where the MSDE performs better than the MDPDE when estimating a location parameter or a proportion of mixed distributions.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.44-51
• /
• 2001

We compare with earthquake parameters of KMA(Korea Meteorological Administration) and ISC(International Seismological Centre) to understand characteristics of earthquake using 30 earthquakes data acquired from 1978 to 1998 in Korea. We calculate difference of KMA between ISC epicentral distance and analyze for magnitude and year. Difference of epicentral distance decreases according to increase of magnitude and have no concern with year. That is the lowest in case of earthquake occurring in land of south Korea. We estimate relation formula for magnitude of KMA and ESC. The result can be expressed in KMA( $M_{L}$) and ISC( $m_{b}$ ) as $M_{L}$$^{KMA}$ = 0.70* $m_{b}$ $^{ISC}$+1.03 and in KMA( $M_{L}$) and ISC( $M_{L}$ as $M_{L}$$^{KMA}$=0.47* $M_{L}$$^{ISC}$+1.37X> ISC/+1.371.371.37

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.32 no.3
• /
• pp.241-248
• /
• 1996

The relationship between width of line target and distance at the limit of discrimination was examined by means of the behavioral method, for filefish Stephanolepis cirrhifer from 11 to 15cm body length. Target distance was distance from beginning of partition board to target plate, and was varied from 50cm to 200cm. The target plate was made of white acrylic resin with a vertical black line in the center. The width of line target was varied from 0.2mm to 8.0mm. Fish were trained to respond to a line target and the width of line target reduced until the minimum width required to elicit a response was established. Rate of success was expressed as the percentage of target choices in 90 trials. The line acuity of filefish was found to be 0.58 at a target distance of 50cm. The rate of success decreased slowly as line target width decreased from 8.0mm to 1.5mm, and decreased suddenly for target widths less than about 1.5mm. The width of the line target D(mm) at the limit of discrimination was shown to be an exponential function of the target distance L(cm) as follows : D=exp(9.947$\times$$10^-3$.L+0.146)