• Title/Summary/Keyword: $K_0$ Consolidation

Search Result 244, Processing Time 0.021 seconds

Evaluation of Permeability Characteristics of Kimhae Clay by Laboratory Tests. (실내실험을 통한 김해점토의 투수특성 평가)

  • 김동휘;임형덕;김진원;이우진
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2000.03b
    • /
    • pp.647-654
    • /
    • 2000
  • During consolidation, the permeability of clay decreases with void ratio because of the reduction in total void space. After Kozeny(1927) and Carman(1956), many researchers have proposed the relations between void ratio and permeability. Most of the relations are expressed in the following forms as : (1) log e - log k(1+e), (2) e - log k, or (3) log e - log k. These relations have been found valid for a large number of normally consolidated clays. From laboratory test(CRS and I $L_{CON}$) results, the relation between void ratio and permeability of Kimhae clay was well defined in all of the three forms. Permeability change index, $C_{k}$, of Kimhae clay was in the range of 0.64~1,03 and average value of $C_{k}$ was 0.821. And the test results satisfied the experimental correlation between $C_{k}$ and e, $C_{k}$=0.5e. In log e - log k(1+e) relation, constant C was in the range of 1.91~4.74$\times$10$^{-8}$ cm/sec and n was in the range of 3.74~4.60.c and n was in the range of 3.74~4.60.74~4.60.0.

  • PDF

Constant Rate of Strain Consolidation Test with Rowe Cell on the Clay with Sand Seam (샌드심이 존재하는 점토에 Rowe Cell를 이용한 일정변형률 압밀시험)

  • Kim, Jae-Hong;Kim, Chan-Kee;Kim, Tae-Hyung
    • Journal of the Korean Geotechnical Society
    • /
    • v.33 no.5
    • /
    • pp.5-13
    • /
    • 2017
  • The sand layer deposited in clay is called a sand seam, which is formed by inflow of sands due to river flooding or slope failure in the middle of sinking and sediment of clay. When the sand seam exists in clay layer, the drainage direction changes from one way to both ways, and the time of consolidation may be reduced. However, it is not clearly proved due to lack of studies of sand seam and currently is not reflected in the design of soft soil improvement. As a fundamental study about sand seam, the oedometer tests and constant rate of strain tests with Rowe cell were conducted on clay specimens with sand seam. For tests, a frozen method was specially designed for making the sand seam. It was concluded that the test results showed the sand seam affects the coefficient of consolidation of clay. If the thickness of sand seam exceeds 0.05 times of specimen height, the sand seam works as drainage layer of pore water horizontally as well as vertically, and consequently the consolidation is accelerated.

Effects of Anisotropic Consolidation on Flow Failure Behavior of a Silty Sand (이방압밀이 실트질 모래의 유동파괴거동에 미치는 영향)

  • 강병희;김방식;정혁일
    • Journal of the Korean Geotechnical Society
    • /
    • v.17 no.5
    • /
    • pp.173-180
    • /
    • 2001
  • 이방압밀이 실트질모래의 정적재하에 의한 유동파괴거동에 미치는 영향을 연구하기 위하여 비배수삼축압축시험을 수행하였다. 이를 위하여 상대밀도가 약 17%인 공시체를 습윤다짐방법에 의해서 성형하고 4가지의 압밀응력비, 1.0, 0.7, 0.55, $K_{o}$ 로서 압밀시켰다. 시험결과로서 정상상태선은 p-q 공간상에서 압밀응력비에 관계없이 유일한 직선이며 collapse line의 기울기는 압밀응력비가 증가함에 따라 선형적으로 감소한다는 사실을 보여준다. 또한, 유동파괴거동을 보이는 느슨하게 다져진 실트질모래의 잔류강도($S_{us}$ )와 첨두강도($S^{p}$ )와의 관계는 압밀응력비의 크기에 관계없이 $S_{p}$ /$p_{c}$ = $A_{L}$ +$B_{L}$ ($S_{us}$ /$p_{c}$ )로 표현되는 일반식으로 나타낼 수 있으며 계수 $A_{L}$$B_{L}$은 압밀응력비의 크기에 따라 선형적으로 변하는 경향을 나타낸다.

  • PDF

Consolidation and Mechanical Behavior of Gas Atomized MgZn4.3Y0.7 Alloy Powders using High Pressure Torsion (고압비틀림 공정을 통한 급속응고 MgZn4.3Y0.7 합금 분말의 치밀화 및 기계적 거동)

  • Yoon, Eun-Yoo;Chae, Hong-Jun;Kim, Taek-Soo;Lee, Chong-Soo;Kim, Hyoung-Seop
    • Journal of Powder Materials
    • /
    • v.17 no.3
    • /
    • pp.190-196
    • /
    • 2010
  • In this paper, rapid solidified Mg-4.3Zn-0.7Y (at.%) alloy powders were prepared using an inert gas atomizer, followed by a severe plastic deformation technique of high pressure torsion (HPT) for consolidation of the powders. The gas atomized powders were almost spherical in shape, and grain size was as fine as less than $5\;{\mu}m$ due to rapid solidification. Plastic deformation responses during HPT were simulated using the finite element method, which shows in good agreement with the analytical solutions of a strain expression in torsion. Varying the HPT processing temperature from ambient to 473 K, the behavior of powder consolidation, matrix microstructural evolution and mechanical properties of the compacts was investigated. The gas atomized powders were deformed plastically as well as fully densified, resulting in effective grain size refinements and enhanced microhardness values.

A Characteristic of Deformation and Strength of Domestic Sands by Triaxial Compression Tests (삼축압축시험에 의한 국내 모래의 변형-강도 특성)

  • Park, Choon Sik;Kim, Jong Hwan;Park, Cheol Soo
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.34 no.2
    • /
    • pp.515-527
    • /
    • 2014
  • This study conducted experiment for understanding engineering characteristics of domestic sands by examining standard sand and sand from Yokji Island and Nakdong River in terms of confining pressure, $K_0$, over consolidation and relative density factors through triaxial compression test. The test showed that deviator stress by strain positively changed as confining pressure and relative density grow while $K_0$ and over consolidation factors do not directly correlated with it. Angle of internal friction decreases as confining pressure increases which strengthens contact force between particles, and declines as relative density drops, whereas $K_0$ and over consolidation factors hardly affect the results. When it comes to volumetric strain, volume expansion decreases as confining pressure increase due to crushability and rearrangement of particles while $K_0$ and over consolidation shows same movement unconditionally, and relative density appears compressed as it grows at the beginning however it expands as axial strain increases. Modulus of elasticity ($E_{sec}$) by strain has tendency into convergence resulting in initial secant modulus of elasticity ($E_{ini}$) > secant modulus of elasticity($E_{sec}$) > tangent modulus of elasticity ($E_{tan}$). On the other hand, it grows as confining pressure and relative density increase while indicating similar modulus of elasticity ($E_{sec}$) regarding on $K_0$ and over consolidation. Slope of critical line (M) tended to decrease as confining pressure increases, follow same line according to $K_0$, confining pressure and relative density, and increase as relative density grows.

The Prevalence of Mycoplasma hyopneumoniae Antigens in Pneumonic Lungs and Serum Antibodies of Slaughtered Pigs in Jeju (제주지역 도축돼지의 페렴병변에서 Mycoplasma hyopneumoniae 항원 및 혈중 항체 조사 연구)

  • Kim Seung-Il;Yang Hyoung-Seok;Kim Jae-Hoon;Bae Jong-Hee
    • Journal of Veterinary Clinics
    • /
    • v.22 no.4
    • /
    • pp.365-370
    • /
    • 2005
  • Enzootic pneumonia caused by Mycoplasma hyopneumoniae is responsible for major economic losses in pig herds of world wide. Mycoplasma hyopneumoniae can also act as a primary pathogen of porcine respiratory disease complex followed by bacterial or viral infection. This study was carried out to investigate the prevalence of mycoplasmal pneumonia of slaughtered pigs in Jeju for two years. The lungs and sera of 214 cases were examined for gross and microscopic lesions of the lungs, immunohistichemistry test for Mycoplasma hyopneumoniae antigen and enzyme-linked immunohistichemistry assay (ELISA) for serum antibody titer. Pulmonary consolidation was observed in the lungs of 163 pigs $(76.1\%)$ with average gross lesion score of $6.0\%$., Bronchointerstitial pneumonia was most frequently observed $(78.5\%)$. The incidence of pulmonary consolidation was decreased in vaccinated pigs compared to that of non-vaccinated pigs. The rate of consolidation in the lungs was significantly decreased in the vaccinated pigs (P<0.05). Antigen of Mycoplasma hyopneumoniae was identified by immunohistichemistry test in the lungs of 174 pigs $(81.3\%)$. ELISh antibodies to Mycoplasma hyopneumoniae were detected in 154 pigs $(72.0\%)$. These results showed the prevalence of swine pneumonia and the incidence of Mycoplasma hyopneumoniae in slaughtered pigs of Jeiu province. We expect that these results would be helpful for the control of swine mycoplasmal pneumonia and porcine respiratory disease complex in Jeju.

Effects of using silica fume and lime in the treatment of kaolin soft clay

  • Alrubaye, Ali Jamal;Hasan, Muzamir;Fattah, Mohammed Y.
    • Geomechanics and Engineering
    • /
    • v.14 no.3
    • /
    • pp.247-255
    • /
    • 2018
  • Soil stabilization can make the soils becoming more stable by using an admixture to the soil. Lime stabilization enhances the engineering properties of soil, which includes reducing soil plasticity, increasing optimum moisture content, decreasing maximum dry density and improving soil compaction. Silica fume is utilized as a pozzolanic material in the application of soil stabilization. Silica fume was once considered non-environmental friendly. In this paper, the materials required are kaolin grade S300, lime and silica fume. The focus of the study is on the determination of the physical properties of the soils tested and the consolidation of kaolin mixed with 6% silica fume and different percentages (3%, 5%, 7% and 9%) of lime. Consolidation test is carried out on the kaolin and the mixtures of soil-lime-silica fume to investigate the effect of lime stabilization with silica fume additives on the consolidation of the mixtures. Based on the results obtained, all soil samples are indicated as soils with medium plasticity. For mixtures with 0% to 9% of lime with 6% SF, the decrease in the maximum dry density is about 15.9% and the increase in the optimum moisture content is about 23.5%. Decreases in the coefficient of permeability of the mixtures occur if compared to the coefficient of permeability of kaolin soft clay itself reduce the compression index (Cc) more than L-SF soil mix due to pozzolanic reaction between lime and silica fume and the optimum percent of lime-silica fume was found to be (5%+6%) mix. The average coefficient of volume compressibility decreases with increasing the stabilizer content due to pozzolanic reaction happening within the soil which results in changes in the soil matrix. Lime content +6% silica fume mix can reduce the coefficient of consolidation from at 3%L+6%SF, thereafter there is an increase from 9%L+6%SF mix. The optimal percentage of lime silica fume combination is attained at 5.0% lime and 6.0% silica fume in order to improve the shear strength of kaolin soft clay. Microstructural development took place in the stabilized soil due to increase in lime content of tertiary clay stabilized with 7% lime and 4% silica fume together.

Effects of Neuromuscular Electrical Stimulation on Distracted Boneafter Mandibular Distraction Osteogenesis in Canine Model (성견의 하악골 골신장술 후 골 형성에 대한 신경근육의 전기적 자극의 효과)

  • Son, Jang-Ho;Park, Bong-Wook;Byun, June-Ho;Cho, Yeong-Cheol;Sung, Iel-Yong
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.33 no.2
    • /
    • pp.120-127
    • /
    • 2011
  • Purpose: This study was designed to examine whether the use of neuromuscular electrical stimulation (NMES) after mandibular distraction osteogenesis accelerated bone formation and consolidation. Methods: Eight adult dogs underwent mandibular left body osteotomy. After a 3 day latency period, a distraction rod device was activated at a rate of 1.0 mm once per day for 10 days. After the completion of mandibular lengthening, NMES group was treated twice daily with 2 hours of NMES for 14, and 28 days, while non-NMES group did not receive NMES. The distracted segment was evaluated radiolgraphically histologically and than immunohistochemically for osteopontin (OPN) to evaluate new bone formation and consolidation. Results: Radiography, did not demonstrate significantly different images between the group and the NMES group. Histological examination however, showed that the new bone formation 14 and 28 days after distraction was better in the NMES group when compared to non-NMES group. Immunohistochemical analysis demonstrated that the staining intensity of OPN increased more in the NMES group than in non-NMES group during early consolidation. Conclusion: The results of this study demonstrated that the use of NMES can promote bone formation and consolidation.

A Study on the Relationship between Void Ratio and Permeability by Constant Strain Rate Consolidation Test (일정변형률 압밀시험을 이용한 간극비-투수계수의 관계 연구)

  • Joo, Jong-Jin;Lim, Hyung-Duk;Lee, Woo-Jin;Kim, Dae-Kyu;Kim, Nak-Kyung;Kim, Hyung-Joo
    • Journal of the Korean GEO-environmental Society
    • /
    • v.3 no.3
    • /
    • pp.15-25
    • /
    • 2002
  • The permeability coefficient is one of the fundamental engineering properties of soft clays. Consolidation process as well as migration of pollutants in soil are affected the permeability coefficient, which generally decreases with the reduction in void ratio during consolidation. After Kozeny(1927) and Carman(1956), many researchers have proposed the relationships between void ratio and permeability in such forms as; (1) log e - log k(1+e), (2) e - log k, or (3) log e - log k. Constant rate of strain (CRS) tests was performed with undisturbed samples obtained at Kunsan and Kimhae deposits, which are representative Korean marine clay. From the results of the tests, the relationships were found valid for Kunsan and Kimhae clays. The experimental correlation $C_k=0.5e_o$ was satisfied with Kimhae clay but not with Kunsan clay.

  • PDF

The Physical and Consolidation Characteristics of Soft Clay in Nakdong River Lower Basin (낙동강 하구지역 연약 점성토의 물리특성 및 압밀특성)

  • Kang, Sung Uk;Jang, Jeong Wook;Chung, Youn In
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.28 no.5
    • /
    • pp.303-311
    • /
    • 2016
  • From having an experimental study of physical and consolidation characteristics of soft clay in Nakdong river lower basin, we come to the conclusion as follow. Clay minerals in Nakdong river lower basin are classified into Kaolinite and Illite. Water content($W_n$) is similarly distributed in a range of 50.4% to 92.8% in Noksan and 46.6% to 99.0% in Jangyu, and liquid limit(LL) of both areas appears lower than water content. In the case of compression index, the index of jangyu is a little higher than that of Noksan because Jangyu is in a range of 0.67 to 1.94 and Noksan in a range of 0.44 to 1.5. The second compression index of Jangyu in a range of 0.027 to 0.092 is also higher than Noksan in a range of 0.024 to 0.075. As a result of regression analysis, a relation between water content and compression index is linear, and between initial void ratio and compression index is shown to $C_c=0.80e_o-0.58$. The ratio of $C_{\alpha}/C_c$ in a range of 0.03 to 0.08 expresses a wide range.