• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.5-9
• /
• 2013

Recently, eco-friendly sources of energy by fuel cells that use hydrogen as an energy source has emerged as the next generation of energy to solve the problem of environmental issues and exhaustion of energy. A solid oxide fuel cell(SOFC) classified based on the type of ion transfer mediator electrolyte has actively being researched. However, the reliability according to the thermal cycle is low during the operation of the fuel cell, and deformation problem comes from the difference in thermal expansion coefficient between the electrode material, the components made of ceramic material is also brittle, which means disadvantages in terms of the strength. Therefore, in this study, considering the states of the manufacturing and operating of SOFC single cells, the stress analyses in the each of the interfacial layer between the anode, electrolyte and the cathode were performed to get the basic data for reliability assessment of SOFC. The obtained results show that von Mises stress according to the thickness direction on operating state occurred maximum stress value in the electrolyte layer. And also the stresses inside the active area on a distance of 1 ${\mu}m$ from the electrode interface were estimated. Futhermore the evaluation was done for the variation of the stress according to the stage of the operation divided into three stages of manufacturing, stack, and operating.

• Microbiology and Biotechnology Letters
• /
• v.43 no.2
• /
• pp.164-168
• /
• 2015

Citric acid is produced via submerged fermentation using yeasts. Among eight different strains of yeast, Candida zeylanoides was chosen as the strain for producing citric acid and optimized for various C/N ratios and effects of phosphate or Fe²⁺ ions in a clean carbon source medium (glucose: fructose, 1:1). The yield of citric acid was maximized at a C/N ratio of 40/1, a phosphate addition of 1.0 g/l, and an Fe²⁺ ion concentration of less than 50 mg/l, yielding up to 91 g/L in the broth with 18.5 g/l of isocitric acid in a six-day fermentation period using a pre-treated molasses medium. The yield of batch culture was 0.51 (Y_p/s, g/g) in a 5 L-Jar fermenter.

• Clean Technology
• /
• v.19 no.3
• /
• pp.279-286
• /
• 2013

Using a cation exchange resin of polystyrene-DVB copolymer as a carbon source for the production of activated carbon, the effects of operating parameters on the physical properties of activated carbon such as specific surface area and specific pore volume were experimentally studied. In carbonization process specific surface area and specific pore volume of carbonized product decreased with the increase of carbonization temperature and time. They were proportional to activation temperature and time up to the specific temperature and time in activation process. In carbonization process the increase of heating rate gave negative effect to the properties. The properties of activated product, on the contrary, increased with the heating rate in carbonization process. The properties of activated carbon manufactured with the resin exchanged with divalent cations were lower than those with raw resin.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.4
• /
• pp.197-210
• /
• 1999

The hydrogen storage performance and electrochemical properties of $Zr_{1-X}Ti_X(Mn_{0.2}V_{0.2}Ni_{0.6})_{1.8}$(X=0.0, 0.2, 0.4, 0.6) alloys are investigated. The relationship between discharge performance and alloy characteristics such as P-C-T characteristics and crystallographic parameters is also discussed. All of these alloys are found to have mainly a C14-type Laves phase structure by X-ray diffraction analysis. As the mole fraction of Ti in the alloy increases, the reversible hydrogen storage capacity decreases while the equilibrium hydrogen pressure of alloy increases. Furthermore, the discharge capacity shows a maxima behavior and the rate-capability is increased, but the cycling durability is rapidly degraded with increasing Ti content in the alloy. In order to analyze the above phenomena, the phase distribution, surface composition, and dissolution amount of alloy constituting elements are examined by S.E.M., A.E.S. and I.C.P. respectively. The decrease of secondary phase amount with increasing Ti content in the alloy explains that the micro-galvanic corrosion by multiphase formation is little related with the degradation of the alloys. The analysis of surface composition shows that the rapid degradation of Ti-substituted Zr base alloy electrode is due to the growth of oxygen penetration layer. After comparing the radii of atoms and ions in the electrolyte, it is clear that the electrode surface becomes more porous, and that is the source of growth of oxygen penetration layer while accelerating the dissolution of alloy constituting elements with increasing Ti content. Consequently, the rapid degradation (fast growth of the oxygen-penetrated layer) with increasing Ti substitution in Zr-based alloy is ascribed to the formation of porous surface oxide through which the oxygen atom and hydroxyl ion with relatively large radius can easily transport into the electrode surface.

• Parasites, Hosts and Diseases
• /
• v.50 no.2
• /
• pp.119-126
• /
• 2012

Carboxylic acids play an important role in both aerobic and anaerobic metabolic pathways of both the snail and the parasite. Monitoring the effects of infection by schistosome on Biomphalaria alexandrina carboxylic acids metabolic profiles represents a promising additional source of information about the state of metabolic system. We separated and quantified pyruvic, fumaric, malic, oxalic, and acetic acids using ion-suppression reversed-phase high performance liquid chromatography (HPLC) to detect correlations between these acids in both hemolymph and digestive gland gonad complex (DGG's) samples in a total of 300 B. alexandrina snails (150 infected and 150 controls) at different stages of infection. The results showed that the majority of metabolite pairs did not show significant correlations. However, some high correlations were found between the studied acids within the control group but not in other groups. More striking was the existence of reversed correlations between the same acids at different stages of infection. Some possible explanations of the underlying mechanisms were discussed. Ultimately, however, further data are required for resolving the responsible regulatory events. These findings highlight the potential of metabolomics as a novel approach for fundamental investigations of host-pathogen interactions as well as disease surveillance and control.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.106-115
• /
• 2002

Growth characteristics of micro carbon structures fabricated by laser-assisted chemical vapor deposition are studied. Argon ion laser and ethylene were used as the energy source and reaction gas, respectively, to grow micro carbon rod through pyrolytic decomposition of the reaction gas. Experiments were performed at various conditions to investigate the influence of process parameters on growth characteristics such as the diameter or growth rate of the micro carbon rod with respect to reaction gas pressure and incident laser power. Reaction gas pressure in experiments ranges from 200 to 600Torr and the incident laser power from 0.3 to 3.8W. For these conditions, the diameter of the rod increases linearly with respect to the laser power but is almost independent of the reaction gas pressure. Growth rate of the rod changes little with gas pressure when the laser power remains below IW. For a constant reaction gas pressure, the growth rate increase with Increasing laser power, but the rate of increase decreases gradually, implying that the chemical vapor deposition condition changes from a kinetically-limited regime to a mass-transport-limited regime. When the carbon rod was grown at near threshold laser power, a very smooth surface is obtained on the rod. By continuously moving the focusing lens in the direction of growth, a micro carbon rod with a diameter of 287${\mu}{\textrm}{m}$ and aspect ratio of 100 was fabricated..

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.5
• /
• pp.434-442
• /
• 1990

Aspergillus sp. CC-29 ws selected for its strong protease activity among various stains of molds found in soil. It was found that the production of alkaline protease reached to maximum when the wheat bran medium containing glucose as carbon source had been cultured for 4 days. Alkaline proteased was purified 36.10 fold from Aspergillus sp. CC-29 The purification procedures included ammonium sulfate fractunation gel filteration on Sepha-dex G-75 G-150 and DEAE-cellulose ion-exchange chromatography, The yield of the purified enzyme was 22.40% The purified enzyme was confirmed as a single band by the polyacryla-mide. When the purified enzyme was applied to SDS-PAGE the molecular weight was estima-ted 24000. The optimum pH for the enzyme activity was 9.0 and the optimum temperature was 4$0^{\circ}C$ The reaction of this enzyme followed typical Michaelis-Menten kinetics with the Km value of 2.10$\times$10-4M with the Vmax of 29.41 $\mu$g/min. The enzyme was reactively stable in alkalic condition and unstable by heat treatment. The activity of alkaline protease was increased by the addition of Ca2+ whereas it was inhibited by Hg2+ Zn2+ at concentration of 1$\times$10-3M.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.363-368
• /
• 2003

The major ionic components of precipitation collected at the 1100 Site of Mt. Halla and Jeju city have been determined. The reliability of the analytical data was verified by the comparison of ion balances, electric conductivities and acid fractions; all of their correlation coefficients were above 0.94. Ionic strengths lower than $10^{-4}$ M were found in 53% of the 1100 Site samples and 28% of the Jeju city samples. Compared with other inland areas, the wet deposition of $Na^+,\;Cl^-\;and\;Mg^{2+}$ was relatively larger, but that of $NH_4^+,\;nss-SO_4^{2-}$(non-sea salt sulfate) and $NO_3^-$ was lower. Especially the wet deposition increase of $Ca^{2+}$ in the spring season supports the possibility of the Asian Dust effect. The acidification of precipitation was caused mostly by $SO_4^{2-}\;and\;NO_3^-$ in the Jeju area, and the organic acids have contributed only about 7% to the acidity. The neutralization factors by NH₃were 0.47 and 0.48, and that of CaCO₃was 0.31 and 0.25 at the 1100 Site and Jeju city, respectively. Investigation into major influencing sources on precipitation components by factor analysis showed that the precipitation at the 1100 Site had been influenced mostly by an anthropogenic source, followed by soil and seawater sources. The precipitation at Jeju city was mainly influenced by oceanic sources, followed by anthropogenic and soil sources.

• The Journal of the Petrological Society of Korea
• /
• v.18 no.3
• /
• pp.255-267
• /
• 2009

The intrusive rocks in the Hudongri area, Chuncheon located in central Gyeonggi Massif consist of gabbroic diorite and diorite. K-Ar age of biotite separated from diorite sample records middle Triassic age of 228 Ma. The intrusives are characterized by enrichment of MgO, Ni and Cr as well as large ion lithophile elements such as Sa and Sr, which is indicative of derivation of magma from enriched mantle. The intrusives also have enriched Sr-Nd isotopic compositions, which appear to result from a long-term incompatible element enriched mantle source with an effect of crustal contamination. Occurrence of abundant hydrous minerals such as amphiboles and biotite rather than anhydrous minerals of pyroxene and olivine in mafic intrusive as well as being plotted in volcanic arc field in tectonic environment discrimination diagram indicate the mafic-intermediate intrusives in the Hudongri area, Chuncheon were derived from mantle material enriched by subduction.

• Journal of Life Science
• /
• v.17 no.11
• /
• pp.1582-1586
• /
• 2007

Previous study (J. of Chem. Technol. Biotechnol. 2004, 79, 79-84) showed that bacterial cellulose (BC) produced by a bacterial strain JH232 has potential as a source for environmentally friendly ion exchange membranes. In this study, strain JH232 was investigated for phylogenetic classified and characterized for BC production. Comparative analysis of 16S rRNA gene revealed that the strain belongs to the genus Gluconacetobacter. Maximum production of BC was observed when JH232 was cultured in CSL medium (pH 5.5) at $30^{\circ}C$ as determined by flask experiment. When batch and fed-batch cultures of JH232 were performed in the fermenter experiment to compare BC productivity of the strain, BC productivity of fed-batch culture was 1.56 times higher than that of batch culture.