• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3344-3351
• /
• 2021

The Rare Isotope Science Project was launched in 2011 in Korea toward constructing the Rare isotope Accelerator complex for ON line experiments (RAON). RAON will house several experimental systems, including the Muon Spin Rotation/Relaxation/Resonance (μSR) facility in High Energy Experimental Building B. This facility will use 600-MeV protons with a maximum current of 660 pμA and beam power of 400 kW. The key μSR features will facilitate projects related to condensed-matter and nuclear physics. Typical experiments require a few million surface muons fully spin-polarized opposite to their momentum for application to small samples. Here, we describe the design of a muon transport beam line for delivering the requisite muon numbers and the electromagnetic-component specifications in the μSR facility. We determine the beam-line configuration via beam-optics calculations and the transmission efficiency via single-particle tracking simulations. The electromagnet properties, including fringe field effects, are applied for each component in the calculations. The designed surface-muon beamline is 17.3 m long, consisting of 2 solenoids, 2 dipoles affording 70° deflection, 9 quadrupoles, and a Wien filter to eliminate contaminant positrons. The average incident-muon flux and spin rotation angle are estimated as 5.2 × 10⁶ μ⁺/s and 45°, respectively.

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.107-111
• /
• 2006

Kernel oils of Lindera erythrocarpa seeds had high level of unusual fatty acid. Picolinyl ester of this unknown fatty acid showed molecular ion at m/z = 317 with other diagnostic ions such as m/z = 151, 191 (40 amu between two peaks), 204, and 218 on GC-MS. Characteristic peak at $720\;cm^{-1}$ appeared in IR spectrum. In $^1H-NMR$ spectrum both methylene protons at C-3 and C-6 resonated at ${\delta}2.309$ and ${\delta}2.012$, and methine protons of double bond resonated in lower magnetic field centered at ${\delta}5.296$ (C-4) and ${\delta}5.387$ (C-5) as multiplet (J = 9.7Hz). In $^{13}C-NMR$, signals at ${\delta}22.669$ and ${\delta}27.048$ were due to C-3 and C-6 of ${\delta}^4$-monoenoic acid. Results obtained from spectroscopic measurements confirmed unknown fatty acid as cis-4-tetradecenoic acid (cis-4-$C_{14:1}$). Main fatty acid components of oils were cis-4-$C_{14:1}$ (44.5-45.1%), oleic acid ($C_{18:1}$), 20.4-21.3%), and lauric acid ($C_{12:0}$, 11.6-12.4%), along with trace amounts of cis-4-$C_{12:1}$ and cis-4-$C_{16:1}$.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.45-54
• /
• 2011

A vehicle suspension system performs two functions, the ride quality and the stability, which conflict with each other. Among the various suspension systems, an active suspension system has an external energy source, from which energy is always supplied to the system for continuous control of vehicle motion. In the process of the linearization for the nonlinear active suspension system, the frequency dependent damping method is used for the exact modelling to the real model. The pressure control valve which is controlled by proportional solenoid is the most important component in the active suspension system. The pressure control valve has the dynamic characteristics with 1st order delay. Therefore, It's necessary to adopt the lead compensator to compensate the dynamics of the pressure control valve. The sampling time is also important factor for the control performances. The sampling time value is proposed to satisfy the system performances. After the modelling and simulation for the pressure control valve and vehicle dynamic, the performances of the vehicle ride quality and the stability are enhanced.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.41.1-41.1
• /
• 2020

Different molecular lines trace different physical environments (with various densities and temperatures) within molecular clouds (MCs). Therefore, multimolecular line observations are crucial to study the physical and chemical structures of MCs. We observed the Orion A and Ophiuchus clouds in six different molecular lines as a Taeduk Radio Astronomy Observatory Key Science Program (TRAO-KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale" (TIMES; PI: Jeong-Eun Lee). Here, we investigate the characteristic relations between the observed lines by performing the Principal Component Analysis (PCA). We also investigate the correlation between the line intensity distributions and the physical parameters, such as the gas column density and dust temperature. Finally, we will discuss how the correlations among different chemical tracers vary with the star formation environments.

• Nuclear Engineering and Technology
• /
• v.56 no.2
• /
• pp.707-714
• /
• 2024

Different degrees of natural radioactivity found in quartz can have negative consequences on health. Quartz vein along the investigated Abu Ramad area, Egypt, had its natural radioactivity assessed. The HPGe spectrometer was used to determine the role played by the radionuclides ²³⁸U, ²³²Th, and ⁴⁰K in the gamma radiation that was emitted, and the results showed that these concentrations are 484.64 ± 288.4, 36.8 ± 13.1 and 772.2 ± 134.6 Bq kg^-1 were higher than the corresponding reported global limits of 33, 45, and 412 Bq kg^-1 for each radionuclide (²³⁸U, ²³²Th, and ⁴⁰K). Among the radiological hazard parameters, the excess lifetime cancer risk (ELCR) is estimated and it's mean value of ELCR (1.2) is higher than the permissible limit of 0.00029. The relationship between the radionuclides and the associated radiological hazard characteristics was investigated based on multivariate statistical methods including Pearson correlation, principal component analysis (PCA), and hierarchical cluster analysis (HCA). According to statistical research, the radioactive risk of quartz is primarily caused by the ²³⁸U, ²³²Thand ⁴⁰K. Finally, applying quartz to building materials would pose a significant risk to the public.

• Journal of Oral Medicine and Pain
• /
• v.45 no.3
• /
• pp.56-64
• /
• 2020

Purpose: Temporomandibular disorders (TMD) is a mosaic of clinical signs and symptoms that can be regarded as a set of phenotypes that are affected by various factors including pain sensitivity, pain disability, sleep and psychological functioning. The aims of this study were to evaluate association of pain experience, sleep quality and psychological distress with different phenotypes of TMD patients. Methods: This retrospective study included a cohort (n=1,858; 63.8% for female, mean age=34.9±15.9 years) of patients with TMD. A set of self-administered questionnaires concerning pain interference (Brief Pain Inventory), pain disability (Graded Chronic Pain Scale), sleep quality (Pittsburg Sleep Questionnaire Index), psychological distress (Symptom Checklist-90 revised), and pain catastrophizing (Pain Catastrophizing Scale) were administered to all participants at the first consultation. All TMD patients were classified into four groups including TMD with internal derangement without pain (TMD_ID, n=370), TMD with joint pain (TMD_J, n=571), TMD with muscle pain (TMD_M, n=541) and TMD with muscle-joint combined pain (TMD_MJ, n=376). Results: The female ratio was particularly high in the group with TMD_MJ (p=0.001). The patients with muscle pain and both muscle and joint pain had longer symptom duration (p=0.004) and presented significantly higher scores in pain experience (p<0.001), subjective sleep quality (p<0.001), pain catastrophizing (p<0.001) and psychological distress (p<0.05) except for paranoid-ideation than the groups with only joint problems. Conclusions: The results of this study highlight the importance of multi-dimensional approach that consider pain disability, sleep quality, and psychological functioning in the management of TMD with muscle component. This study would contribute to a better understanding of interaction between heterogeneous TMD and multiple risk factors in order to build tailored treatment based on different phenotypes.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.6
• /
• pp.293-299
• /
• 2008

In order to provide with fundamental data of the wrought Mg alloy for press forging, the effect of annealing temperature on the microstructure, texture development and tensile properties is studied in a commercial AZ31B Mg alloy sheet. Basal texture i.e. $(0001){\pm}5^{\circ}$[21$\bar{3}$0] is developed in a commercial AZ31B Mg sheet, and the texture is not changed considerably by annealing over $400^{\circ}C{\times}30min$, while (10$\bar{3}$0) component with high intensity can be observed due to abnormal grain growth. When the sheet is tensile-deformed with RD, $45^{\circ}$ and TD directions at room temperature, fracture strains are given by 25.8, 21.4 and 11.9% in the order of RD, $45^{\circ}$ and TD directions, respectively. With increasing annealing temperature up to $450^{\circ}C{\times}30min$, little change in mean grain size can be revealed by annealing below $300^{\circ}C{\times}30min$ but an abnormal grain growth, where some grains become significantly coarser than the rest, occurs by annealing above $400^{\circ}C{\times}30min$. The maximum tensile strain of around 25% is obtained by annealing below $300^{\circ}C{\times}30min$, but it is abruptly decreased to 16% by annealing above $400^{\circ}C{\times}30min$ owing to intergranular fracture of abnormal grown grains.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.277-285
• /
• 2019

In this study, effective cosmetic raw material weighing and bulk manufacturing management system were constructed by using bar code or quick response code (QR code) and database. Raw material labels and weighing labels for bulk manufacturing were published in web environment using the information entered in the database using ScriptX, a print component of Medi&Co. By checking the weighing and manufacturing process by using scanner, tablet and PC, it was possible to remarkably improve the product error caused by erroneous amount or misapplication which is the most cause of error in the production of cosmetic bulk. In conclusion, applying a database that utilizes bar code and QR code to cosmetics manufacturing can reduce the various problems in the process, thereby improving quality control and productivity of cosmetics.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.45-53
• /
• 2002

This investigation is performed to prepare reducing method drained floating debris from the river This paper is present an investigation result of the marine debris characteristics that drained from korea 4 big river(han river, kum river, youngsan river, nakdong river) during July and August. A mount of floating debris different with rainfall. Short heavy rain like as 150mm/day floating debris drained lower, almost floating debris drained when a flooding cause by continuance heavy rain. Floating debris draining is not continuance, but concentrated on a flooding. All debris is do not drained ocean, a lot of debris accumulated riverside. Floating debris is drained with plant and configuration is similar with other river. But, the component ratio is different, so that, to Prepare removing method for floating debris consider that effect of plant debris.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.94-99
• /
• 2010

340 nm UV radiation of $2500\;kJ/m^2$ irradiated a thermoplastic elastomer (TPE) specimen used for interior and exterior materials of a car. After the UV irradiation, the black sample surface was changed to gray. Materials on the aged sample were collected and analyzed using GC/MS, but significant materials were not found. Lots of small cracks were found on the aged specimen surface. Whitening phenomenon of the aged sample disappeared by brushing or searing with a fire on the aged surface. After brushing or searing with a fire, small cracks on the surface vanished. Samples before and after the aging, and the treated samples with brush or fire were analyzed using image analyzer, SEM, EDX, and ATR and the results were compared. The vanished whitening phenomenon by brushing or searing was explained with filling the small cracks by polypropylene of TPE.