• Journal of the Korean Ceramic Society
• /
• v.38 no.1
• /
• pp.39-44
• /
• 2001

솔-젤법으로 S $r_{0.9}$B $i_{2.1}$T $a_2$$O_{9}$ stock solution을 합성하고, Ir $O_2$/ $SiO_2$/Si 및 기판 위에 스핀코팅법으로 약 2000$\AA$ 정도의 두께를 가지고 SBT 박막을 제조하였다. Pt/Ti $O_{x}$ 전극을 사용한 SBT 박막과 비교하였을 때 Ir $O_2$전극을 사용한 SBT 박막의 경우 더 낮은 급속 열처리 온도 즉, 72$0^{\circ}C$에서 형석상에서 층상 페롭스카이트 상으로의 상전이가 관찰되었다. 그리고, Ir $O_2$전극을 사용한 SBT 박막은 낮은 열처리에서 결정성장이 이루어졌다. Ir $O_2$전극을 사용한 SBT 박막은 $650^{\circ}C$에서 열처리하였을 때 포화된 이력곡선을 얻었지만, Pt/Ti $O_{x}$ 전극을 사용한 SBT 박막은 $700^{\circ}C$에서 열처리하였을 때 이력곡선이 관찰되었다. Ir $O_2$전극을 사용한 SBT 박막은 $700^{\circ}C$의 열처리에서 8.79 $\mu$C/$ extrm{cm}^2$ (3V)의 2Pr 값을 나타내었다.나타내었다.다.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.49-54
• /
• 2003

We have investigated the effects of hydrogen annealing on the physical and electrical properties of $SrBi_{2}Ta_{2}O_9(SBT)$ thin films in the Pt/SBT/Si (MFS) structure and Pt/SBT/Pt (MFM) one, respectively. The microstructure and electrical characteristics of the SBT films were deteriorated after hydrogen annealing due to the damage of the SBT films during the annealing process. To investigate the reason of the degradation of the SBT films in this work, in particular, the effect of the Pt top electrodes, SBT thin films deposited on Si, Pt, respectively, were annealed with the same process conditions. From the XRD, XPS, P-V, and C-V data, it was seen that the SBT itself was degraded after $H_2$ annealing even without the Pt top electrodes. In addition, the degradation of the SBT films after $H_2$ annealing was accelerated by the catalytic reaction of the Pt top electrodes which is so-called hydrogen degradation. To prevent this phenomenon, we proposed the alternative top electrode material, i.e. Ir, and the electrical properties of the SBT thin films were examined in the $Ir/IrO_2/SBT/IrO_2$ structures before and after the H$_2$ annealing and recovery heat-treatment processes. From the results of the P-V measurement, it could be concluded that Ir is one of the promising candidate as the electrode material for degradation resistance in the MFM structure using SBT thin films.

• Journal of the Korean Ceramic Society
• /
• v.37 no.3
• /
• pp.233-239
• /
• 2000

Sr0.9Bi2+xTa2O9(x=0, 0.1, 0.2, 0.3) thin films on IrO2/SiO2/Si or Pt/Ti/SiO2/Si substrate were prepared by spin coating method using SBT stock solutions synthesized by MOD process. SBT thin films on IrO2 transformed to layered perovskite phase at $700^{\circ}C$, but showed low breakdown voltage due to their porous microstructure. The smaple of Sr0.9Bi2+xTa2O9 composition showed the best dielectric and electrical properties. When the sample of the same composition was annealed at 80$0^{\circ}C$, the dielectric and electric properties were improved due to the grian growth and dense surface. the remanent polarization values(2Pr) at $\pm$3 V for IrO2 and Pt electrodes were 10.5, 7.15$\mu$C/$\textrm{cm}^2$, respectively. The SBT thin film with IrO2 electrode showed the lower coercive field. The leakage current density and breakdown voltage of SBT thin films on IrO2 were higher than those on Pt.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.8
• /
• pp.694-699
• /
• 2000

S $r_{0.9}$/B $i_{2.1}$/T $a_{2}$/ $O_{9}$ solutions was synthesized by MOD (metalorganic decomposition) method. SBT thin films with 2000$\AA$ thickness were prepared on Ir $O_2$/ $SiO_2$/Si and Pt/Ti/ $SiO_2$/Si substrates using the spin coating process and then investigated the dielectric and electrical properties of them. In the case of using Ir $O_2$bottom electrode the hysteresis loop was saturated at lower temperature than Pt/Ti electrode but the breakdown phenomenon was occurred at low voltage because of the rough surface morphology and porous microstructure of SBT thin films. As the results of the fatigue and imprint characteristics related to the lifetime and reliability of devices after 10$^{10}$ cycles the fatigue rates were about 10% at the Ir $O_2$and Pt/Ti bottom electrodes. Both SBT thin films with Ir $O_2$ and with Pt/Ti bottom electrodes show a slight tendency to imprint after 10$^{9}$ cycles but do not lead to a failure.e.e.

• Korean Journal of Materials Research
• /
• v.13 no.2
• /
• pp.69-73
• /
• 2003

In this work, $IrO_2$thin films as bottom electrode of ferroelectric capacitors were deposited and characterized. The $IrO_2$films deposited in the conditions of 25, 40 and 50% oxygen ambient by sputtering method were annealed at 600, 700 and $800^{\circ}C$, respectively. It was found that the crystallinity and the surface morphology of $IrO_2$films affected the surface properties and electrical properties of SBT thin films prepared by the MOD method. With increasing temperature, the crystallinity and the roughness of $IrO_2$films were also increasing. This increasing of roughness degraded the surface properties and electrical properties of SBT films. We found an optimum condition of $IrO_2$films as bottom electrode for ferroelectric capacitor at 50% oxygen ambient and $600^{\circ}C$ annealing temperature. Electrical characterizations were performed by using$ IrO_2$bottom electrodes grown at an optimum conditions. The remanent polarization ($P_{r}$) of the Pt/SBT/$IrO_2$/$SiO_2$/Si structure was 2.75 $\mu$C/$\textrm{cm}^2$ at an applied voltage of 3 V. The leakage current density was $1.06${\times}$10^{-3}$ A/$\textrm{cm}^2$ at an applied voltage of 3 V.

• Journal of the Korean Ceramic Society
• /
• v.40 no.2
• /
• pp.184-190
• /
• 2003

$Sr_{0.9}Bi_{2.1}Ta_2O_9$thin films were deposited on $IrO_2$ electrode by spin coating method using photosensitive sol-gel solution. To ensure the UV-exposure effect on SBT thin films, UV irradiated films and non-UV irradiated films were analyzed by XRD, SEM. As a result, UV-irradiation on SBT thin films promoted grain growth of SBT compared with no UV irradiation. In case of the UV irradiated films annealed at$740{\circ}C$for 1 h in an oxygen ambient, the 2Pr value and Pr/Ps at${pm}5$V were$11.48{mu}C/cm^2$and 0.53, respectively. 2Pr values of the UV irradiated SBT thin films at$660-740{circ}C were approximately 12% higher than those of non-UV irradiated thin films.