• 제목/요약/키워드: $In_{2}O_{3}$

검색결과 30,551건 처리시간 0.071초

유기변성 LDH를 사용한 난연 ABS 나노복합재료의 열적 및 기계적 물성 (Thermal and Mechanical Properties of Flame Retardant ABS Nanocomposites Containing Organo-Modified Layered Double Hydoxide)

  • 김석준
    • Elastomers and Composites
    • /
    • 제43권4호
    • /
    • pp.241-252
    • /
    • 2008
  • 올레인산으로 유기변성된 ZnAl-LDH(SO-ZnAl LDH)를 합성하여 브롬화 에폭시 수지(BER) 및 산화안티몬을 포함하는 난연 ABS 컴파운드에 첨가하였다. 난연 ABS 컴파운드는 동일방향으로 회전하는 이축압출기를 통해 제조되었고 난연성 및 기계적 성질을 측정하기 위한 시편으로 사출성형 되었다. ABS 나노복합재료의 XRD 패턴에서는 피크가 나타나지 않았다. SOZnAl LDH를 포함하는 난연 ABS 나노복합재료는 TGA 시험 결과 향상된 내열성을 보였다. 그러나, 난연 ABS 나노복합재료들은 UL 94 수직시험(1.6 mm 두께)시 등급을 얻지 못했다. BER를 1.5 wt% 이상 더 첨가한 경우들에서만 UL 94 V0 등급을 얻을 수 있었다. SO-ZnAl LDH의 첨가량에 비례하여 난연 ABS 나노복합재료의 노치드 아이조드 충격강도, 인장탄성률 및 신율은 증가하였으나 유동지수는 감소하였다.

굽힘 센서신호를 이용한 인공의수의 제어 (Control of an Artificial Arm using Flex Sensor Signal)

  • 유재명;김영탁
    • 한국지능시스템학회논문지
    • /
    • 제17권6호
    • /
    • pp.738-743
    • /
    • 2007
  • 본 연구는, 팔(하완)을 잃은 장애자용 인공 의수를 장애자가 자신의 의도에 따라 제어하기 위한 센서 시스템과 제어알고리즘에 관한 것이다. 먼저 장애자의 여러 가지 동작 의도를 검출할 수 있는 센싱 시스템을 연구하고 이 센싱 시스템으로부터 발생된 신호를 사용하여 인공의수를 제어하는 방법에 대하여 연구한다. 센서로서는 전기 저항식 굽힘 센서를 사용한다. 이 굽힘 센서를 팔의 상완 이두근과 오구완근에 각각 1개씩 단단히 부착한다. 부착된 센서로부터 출력된 신호는 근육의 굴곡량을 나타내며 팔의 동작의도를 판단 할 수 있는 신호처리 시스템을 통과시켜 하완의 굴곡과 신전 운동, 손의 내전과 외전 운동을 구별한다. 그리고 구별된 신호로부터 실제 팔의 운동 각도를 추정하여 인공의수의 각도를 제어한다. 본 연구의 효용성을 증명하기 위해 2개의 액추에이터와 포텐셔미터를 가진 간단한 인공의수를 제작하여 제어 실험을 하였다. 실험에서 실제 팔의 각도와 인공의수의 제어 각도 사이에는 센서 외부에서 발생되는 노이즈 및 인공의수의 회전 관성, 기계적인 마찰 등으로 인한 오차가 발생하였다. 따라서 오차 값과 오차의 변화 값에 근거한 퍼지 제어 알고리듬을 이용하여 재 실험을 한 결과 하완의 굴곡/신전 운동에서는 평균 약 4도, 손의 회내/외 운동에서는 평균 약 3도의 오차가 측정되어, 퍼지제어기를 설치한 이전보다 오차가 크게 개선되었다.

전자 빔 물리적 증착(EB-PVD)법으로 코팅된 YSZ 열차폐층의 압흔손상 거동에 대한 하부층의 영향 (Influence of Subsurface Layer on the Indentation Damage Behavior of YSZ Thermal Barrier Coating Layers Deposited by Electron Beam Physical Vapor Deposition)

  • 허용석;박상현;한인섭;우상국;정연길;백운규;이기성
    • 한국세라믹학회지
    • /
    • 제45권9호
    • /
    • pp.549-555
    • /
    • 2008
  • The thermal barrier coating must withstand erosion when subjected to flowing gas and should also maintain good stability and mechanical properties while it must also protect the turbine component from high temperature, hot corrosion, creep, and oxidation during operation. In this study we investigated the influence of subsurface layer, $Al_2O_3$ or NiCrCoAIY bond coat layer, on the indentation damage behavior of YSZ thermal barrier coating layers deposited by electron beam physical vapor deposition (EB-PVD). The bond coat is deposited using different process such as air plasma spray (APS) or spray of high velocity oxygen fuel (HVOF) and the thickness is varied. Hertzian indentation technique is used to induce micro damages on the coated layer. The stress-strain behaviors are characterized by results of the indentation tests.

Auxin과 Siderophore 생산성 다기능 생물방제균 Bacillus subtilis AH18 (An Auxin Producing Plant Growth Promoting Rhizobacterium Bacillus subtilis AH18 which has Siderophore-Producing Biocontrol Activity)

  • 정희경;김진락;우상민;김상달
    • 한국미생물·생명공학회지
    • /
    • 제34권2호
    • /
    • pp.94-100
    • /
    • 2006
  • 식물생장 촉진 호르몬인 auxin을 생산하는 균주를 선발하기 위해 경산지역 경작지 토양에서 29종의 세균을 분리하였으며 Salkowsky test를 통해 auxin을 생산하는 14종을 선발하였다. 이 중 CAS(chrome azurol S) blue agar에서 siderophore의 생산을 확인 후 auxin과 siderohroe를 동시에 생산하는 AH18을 최종 선발하였다. AH18의 mung-bean adventitious root induction test를 통해 식물생장 촉진 능이 대조구에 비해 1.5배나 뛰어남을 알 수 있었고, 토마토 pot test에서 토마토 시들음병의 윈인균인 F. oxysporum에 대해서 길항력도 나타내었다. 선발된 AHl8 균주는 16S rDNA와 Biolog system을 통해 Bacillus subtilis 동정되었다. B. subtilis AH18은 Sucrose-asparagine-MgsO$_4$(SAM) medium (pH 6.0)에 접종하여 30$^{\circ}C$에서 3일간 배양 시 siderophore를 가장 많이 생산하는 것을 알 수 있었다.

CBR의 제조(製造) 및 이를 자동차(自動車) Tyre에 활용(活用)하는데 관(關)한 연구(硏究)(제4보(第四報)) Diene Rubber와 Alfin Rubber와의 Blend에 관(關)하여 (Studies on It's Practical Application to Auto Pneumatic Tyre and Manufacture of CBR (Cis-1,4-Polybutadiene Rubber) (Part. 4) On the Blend of Diene rubber and Alfin rubber)

  • 이현오;이영길;김기엽
    • Elastomers and Composites
    • /
    • 제8권1호
    • /
    • pp.33-51
    • /
    • 1973
  • We have studied the blending effects of Diene NF 35 R and Alfin 1530 at various blending ratios, 100/0, 70/30, 50/50, 30/70, 0/100, and of carbon black HAF-HS and ISAF-HS at various compounding ratios of 45 PHR, 55 PHR, 65 PHR, for tyre tread rubber. As the results, it was found that; 1. For tyre tread rubber, as the blending ratio, AR 1530/Diene NF 35R, indicated 70/30, the physical properties we examined were most excellent. 2. Excellent result was obtained in the case of carbon black compounding ratio of 55 PHR. The compounding of ISAF-HS made better result than that of HAF-HS for tensile strength, but the compounding of HAF-HS made better result than that of ISAF-HS for tearing strength and best result for abrasion quantity. 3. Heat buildup obtained from compounding carbon black HAF-HS indicated low temperature than that from compounding carbon black HAP-HS. As the compounding amount of carbon black increased, and as the blending amount of AR 1530 decreased, the heat buildup increased. 4. Carbon black was more efficient to AR 1630 than io Diene NF 35 R. 5. In the physical properties, mooney viscosity and mooney scorch time, as the compounding amount of carbon black increased, the values of mooney viscosity increased, but that of mooney scorch time had a max. point at the compoundiug amount of carbon black, 55 PHR.

  • PDF

0.15C-6Mn TRIP강의 미세조직과 기계적 성질에 미치는 역변태 열처리의 영향 (Effect of Reverse Transformation Treatment on the Microstructure and Mechanical Properties of 0.15C-6Mn TRIP Steels)

  • 홍호;이오연;송기홍
    • 한국재료학회지
    • /
    • 제13권7호
    • /
    • pp.453-459
    • /
    • 2003
  • In this paper the effect of interstitial heat treatment on the microstructure and mechanical properties was examined both in the 0.15C-6Mn steels and 0.15C-6Mn steels added with Nb or Ti. This result will be applied into the development of a steel which has the properties of high strength and high ductility resulted from the transformation induced plasticity. The strength-elongation combination was increased as the holding time was increased when the temperature is at $625^{\circ}C$. However, the strength-elongation combination was decreased sharply as the holding time was increased when the temperature is at $675^{\circ}C$. The tensile strength and elongation of a reverse transformed steels added with Ti or Nb was 93 kg/$\textrm{mm}^2$ and 40%, respectively. This steel shows higher strength more than 10% of the 0.15C-6Mn steel without loss of ductility. The autenite formed from the reverse transformed treatment has a fine lath type, which has the width size of 0.1-0.3 $\mu\textrm{m}$. The TRIP sequence normally transforms the austenite to martensite, however, some of the sequence will produce retained austenite \longrightarrow deformation twin \longrightarrow martensite

설유착증 환아의 언어병리학적 평가 (ANALYSIS OF SPEECH PATHOLOGIC EVALUATION FOR CHILDREN WITH ANKYLOGLOSSIA)

  • 이주경;김영빈;임대호;백진아;신효근;고승오
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제30권5호
    • /
    • pp.447-456
    • /
    • 2008
  • There is close relationship between intraoral structural anomaly and speech- functional problem. Patient with cleft palate patients & ankyloglossia is a typical example, patients with structural anomaly is repaired toward normal structure by operation. Ankyloglossia may cause functional limitation even after adequate surgical treatment speech disorders being one of them. Interindividually, they vary a lot, showing typical articulation specifics. The objective of this study was to evaluate and compare speech for children with ankyloglossia and general public, to determine whether ankyloglossia is associated with articulation problem. We wanted to present criteria for indication of frenectomy. The group of subject is composed of 10 childrens with ankyloglossia and articulation problem, visited the Oral and Maxillofacial surgical unit, dental hospital, Chonbuk university. The average age is 5 Y 7M, M : F ratio is 8 : 2 at the time of speech test. Control group is composed of 10 members without oral structural anomaly. The average age is 5 Y 10M, M : F ratio is 3 : 7 at the time of speech test. Outcomes were measured the PPVT(Peabody Picture Vocabulary Test), PCAT(Picture Consonant Articulation Test), Nasometer II test result obtained each group, statistically measured by Mann-whitney's U Test. There was no difference for 'chronological age-age equivalent' between two group. There was significant difference for 'consonant accuracy' between two group, showed more lower scores in subject group. There was more 'consonant error' in subject group, mostly showed/1/,/s/. A major modality of 'consonant error' was mostly distortion and replacement. There was no significant difference between two group for nasality.

알락하늘소 유충의 외부기생 알락하늘소살이고치벌(Spathius ibarakius Belokobylskij et Maeto)의 발견 (Discovery of Spathius ibarakius Belokobylskij et Maeto (Hymenoptera: Braconidae) as a Larval Ectoparasitoid of Citrus Longhorned Beetle in Korea)

  • 김무성;이혜린;구덕서;;;;김일권;홍기정
    • 한국응용곤충학회지
    • /
    • 제55권3호
    • /
    • pp.285-291
    • /
    • 2016
  • Spathius exarator의 종 그룹에 속하는 S. ibarakius Belokobylskij et Maeto가 한반도에서 알락하늘소(Anoplophora chinensis)의 1령과 2령 유충에 외부기생하는 것으로 확인되었다. 산란유인목을 이용하여 유리알락하늘소와 알락하늘소의 기생봉을 탐색하는 과정에서 이 고치벌이 발견되었다. 이 고치벌의 진단형질과 수컷의 특징, 삽화 및 한반도에 분포하는 종들의 기주목록을 함께 제공하였다.

Down-modulation of Bis reduces the invasive ability of glioma cells induced by TPA, through NF-κB mediated activation of MMP-9

  • Lee, Young Dae;Cui, Mei Nu;Yoon, Hye Hyeon;Kim, Hye Yun;Oh, Il-Hoan;Lee, Jeong-Hwa
    • BMB Reports
    • /
    • 제47권5호
    • /
    • pp.262-267
    • /
    • 2014
  • Bcl-2 interacting cell death suppressor (Bis) has been shown to have anti-apoptotic and anti-stress functions. Recently, increased Bis expression was reported to correlate with glioma aggressiveness. Here, we investigated the effect of Bis knockdown on the acquisition of the invasive phenotype of A172 glioma cells, induced by 12-O-Tetradecanoylphorbol-3-acetate (TPA), using a Transwell assay. Bis knockdown resulted in a significant decrease in the migration and invasion of A172 cells. Furthermore, Bis knockdown notably decreased TPA-induced matrix metalloproteinase-9 (MMP-9) activity and mRNA expression, as measured by zymography and quantitative real time PCR, respectively. A luciferase reporter assay indicated that Bis suppression significantly down-regulated NF-${\kappa}B$-driven transcription. Finally, we demonstrated that the rapid phosphorylation and subsequent degradation of $I{\kappa}B-{\alpha}$ induced by TPA was remarkably delayed by Bis knockdown. These results suggest that Bis regulates the invasive ability of glioma cells elicited by TPA, by modulating NF-${\kappa}B$ activation, and subsequent induction of MMP-9 mRNA.

금속산화물(Cu-ferrite)를 이용한 수소제조 연구 (Study on the hydrogen production using the metal oxide (Cu-ferrite))

  • 박주식;서인태;김정민;이상호;황갑진
    • 한국수소및신에너지학회논문집
    • /
    • 제15권3호
    • /
    • pp.201-207
    • /
    • 2004
  • Redox characteristics of metal oxide for hydrogen production by thermochemical water-splitting were investigated. $CuFe_2O_4$ as a redox pair that had a different molar ratio of Cu and Fe were prepared by co-precipitation method. Hydrogen production consisted of water-splitting step and thermal reduction step was performed below 1200K. Redox characteristics of Cu-ferrites were studied using the thermal gravimetric analysis technique. Also, structure change of Cu-ferrite during thermal reduction was investigated using the high temperature controlled XRD. In results, oxygen release of Cu-ferrite during the thermal reduction was initiated at oxygen site combined with Cu. Consequently, oxygen release amount of Cu-ferrite was increased with increase of Cu molar ratio of Cu-ferrite. It was found that thermal reduction of Cu-ferrite was begun at $875^\circ{C}$. It was confirmed that structure of Cu-ferrite was changed to metal and cation excess metal oxide during the thermal reduction step.